GB/T 19769.3-2012 English PDFUS$874.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 19769.3-2012: Function block for industrial-process measurement and control systems -- Part 3: Tutorial information Status: Valid
Basic dataStandard ID: GB/T 19769.3-2012 (GB/T19769.3-2012)Description (Translated English): Function block for industrial-process measurement and control systems -- Part 3: Tutorial information Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: N10 Classification of International Standard: 25.040 Word Count Estimation: 44,451 Quoted Standard: GB/T 15969.3-2005; GB/T 21099.1-2007; GB/T 21099.2-2007 Adopted Standard: IEC 61499-3-2004, IDT Regulation (derived from): National Standards Bulletin 2012 No. 13 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies a technical report for the wide range of applications aimed at the common feature provides a simple way of expression. In a way it can be considered a " language. " It should be noted, GB/T 19769 is not a programming method. GB/T 19769.3-2012: Function block for industrial-process measurement and control systems -- Part 3: Tutorial information---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Function block for industrial-process measurement and control systems Part 3. Tutorial information ICS 25.040 N10 National Standards of People's Republic of China Industrial process measurement and control systems function blocks Part 3. Guidance Information Part 3. Tutorialinformation (IEC 61499-3.2004, IDT) Issued on. 2012-06-29 2012-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Frequently Asked Questions 1 3.1 General Issues 1 3.2 Object-Oriented 2 3.3 event-driven model 3 3.4 Method 4 project 3.5 Application 5 4 Example 6 4.1 SIFB Application 6 4.1.1 View 6 4.1.2 Trend 7 4.1.3 Remote sampling 8 9 4.1.4 Remote Execution 10 4.1.5 Remote Control 4.1.6 The combination of control and enforcement 11 4.2 System Configuration 12 4.3 Communication using function blocks 13 4.4 process control function block contains 14 variables 4.5 using the adapter interface to implement object-oriented concepts 15 4.6 initialization algorithm 18 5 Chart 19 with ECC implemented state 6 devices and Resource Management 21 6.1 Distributed Management Applications 21 6.2 Device Management Function Block 22 6.3 FBMGT document type definition (DTD) 24 Semantics 6.4 Request/Response 30 Relations Annex A (informative) and other standard 35 Objects Appendix B (Informative Appendix) GB/T 19769 and for the development of 36 References 38 1 PI_REAL view of the type of block 6 Figure 2 Human Interface 7 Figure 3 block types PI_OP_HMI 7 Figure 4 TREND_16_REAL_VS function block type 8 Figure 5 TC_XMTR resource type 9 Figure 6 TC_INTFCSIFB Type 9 Figure 7 VALVE_XCVR resource type 10 Figure 8 VALVE_INTFCSIFB Type 10 Figure 9 PID_RSRC resource type 11 Figure 10 PIDSIFB Type 11 Figure 11 PID_VALVE resource type 12 System Configuration 13 Figure 12 TC_LOOP 13 system timing example of FIG. 13 14 polymorphic adapter type declaration 15 15 polymorphic recipient (client) function block type 16 Figure 16 provides (server) function block type 16 17 resource adapter interface for testing configuration 17 18 17 Test Results Figure 19 HMI Example 19 FIG. 20 is assumed VCR motor control state machine 20 21 to achieve the basic functions of the state of the block diagram in Fig. 21 Figure 22 device management application 21 23 Remote Device Agent 22 24 22 Device Management Resources Figure 25 Kernel Device Management 22 Figure 26 Device Management Service Interface 24 Table 1 FBMGTDTD 25 Table 2 FBMGTDTD element 27 Table 3 Request coding element or elements 30 ResponseReason Table 4 QUERY elements of Request and Response 31ForewordGB/T 19769 "industrial process measurement and control systems function block" is divided into the following sections. --- Part 1. Structure; --- Part 2. Software tools requirements; --- Part 3. Guidance information; --- Part 4. Application Profile Guidelines. This section GB/T 19769 Part 3. This section identical with IEC 61499-3.2004 "industrial process measurement and control systems Function blocks - Part 3. Guidance Information" (English Chinese Version). This section drafted in accordance with GB/T 1.1-2009 given rules. This section according to GB/T 1.1-2009 to IEC 61499-3.2004 made the following editorial changes. --- Remove the IEC 61499-3.2004 foreword, preface rewritten this section; --- Where "IEC 61499" where to "GB/T 19769"; --- With a decimal point "." Instead of a comma as the decimal point, "." --- According to Chinese customs for some formatting has been modified; --- Some of the statements apply to international standards to apply to our standard formulation. Appendix A of this section and Appendix B is an informative annex. This part is proposed by China Machinery Industry Federation. This part of the measurement and control of Standardization Technical Committee (SAC/TC124) is administered by the National industrial processes. This standard is drafted by. Southwest University. Participated in the drafting of this Standard. China Silian Instrument Group Co., Ltd., Shanghai Automation Instrumentation Co., Ltd., Machinery Instrumentation Technology and Economy Institute. The main drafters of this section. Zhang group, Li Tao, Lu Jing, Huang Renjie, Liu Jin, Wei-hua package, Ouyang Jinsong.IntroductionThe following shows the GB/T 19769 describes the various parts of the content. a) The first part ● General requirements, including introduction, scope, normative references, definitions and reference model; ● defined function block types of rules, rules type declaration of an instance of behavior; ● Rule Function blocks in distributed industrial process measurement and control systems (IPMCS) used in the configuration; ● function blocks to meet the communication needs rules distributed IPMCS used; ● Rule Function block IPMCS managing distributed applications, resources and equipment used. b) Part 2 defines the requirements for the software tools to support the following systems engineering tasks GB/T 19769.1 1.1 listed. ● normative function block type; ● resource type and specification of the type of equipment; ● Distributed IPMCS specification analysis and verification; ● Distributed IPMCS configuration, implementation, operation and maintenance; ● information exchange software tools. Objective c) of Part 3 is to promote understanding and reception, and the promotion of common areas IPMCS structure of a particular application, and promote soft Shipping Tools meet the needs of other parts, by providing. ● Frequently Asked Questions about GB/T 19769 answers (FAQ); ● Use GB/T 19769 structural example of control and automation engineering to solve problems frequently encountered. d) Section 4 defines conformance profiles of development guidelines, the need to implement the provisions of GB/T 19769.1 and GB/T 19769.2 Features to provide based on the following properties GB/T 19769 systems, equipment and software tools. ● multiple providers of equipment interoperability; ● software portability between multiple providers of software tools; ● over a provider of software tools for over a provider of the device configurable. Industrial process measurement and control systems function blocks Part 3. Guidance Information1 ScopeThis section provides a technical report, intended to provide a simple method for the expression of a wide range of applications in the field of common features. In a It can be considered a "language" kind of degree. It should be noted, GB/T 19769 is not a programming method.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) used in the present document. GB/T 15969.3-2005 programmable controllers Part 3. programming languages \u200b\u200b(IEC 61131-3.2002, IDT) GB/T 21099.1-2007 process control function blocks - Part 1. System aspects Subjects (IEC /CDV61804-1. 2003, IDT) GB/T 21099.2-2007 Part 2 process control function blocks. Function Block concept and electronic device description language specification (IEC /CDV61804-2.2003, IDT)3 Frequently Asked Questions3.1 General Issues This part of the action. This part is GB/T 19769 Some common questions to answer each compilation. GB/T 19769 benefits. Follow GB/T 19769 distributed industrial process measurement and control systems (IPMCS), and their associated equipment lifecycle Support system will give their owners and system integrators to bring a number of significant benefits, including. a) through integrated configuration, programming, and data management capabilities, can follow to reduce engineering GB/T 19769 Life Cycle Support System the cost of. In addition, simple and complete model GB/T 19769 distributed system makes the system easy to integrate, it also saves a this. This model for all functions of the system (including control and information processing, and communication and process interface), independently of the hard Member and the operating system of representation; b) engineers and technicians by the general concepts and techniques used in all elements of the system, the system can save time to achieve. In addition, by eliminating the previously integrated system incompatible elements and software tools needed for software patches and "stick member (Glueware) ", it is possible to save the system implementation time; Easy to set c) the elimination of patches and adhesive member can be set interoperable software availability, portability and engineering skills of the system elements Cheng, will generate higher reliability and maintainability in the life of the system; d) GB/T 19769 provides an abstract, independent of the implementation of the system function representation. This common goal will So that existing systems be easily ported to the GB/T 19769-compatible systems, the old technology platform (operating system, traffic, etc.) content Easily migrate to the new GB/T 19769-compatible technology platform; e) economies of scale generic software and firmware uniform application of technology will provide each function lower hardware costs. Because modern control hard ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 19769.3-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 19769.3-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 19769.3-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 19769.3-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
