GBZ17215.611-2021 English PDFUS$304.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GBZ17215.611-2021: Electricity metering data exchange - The DLMS/COSEM suite - Part 11: Template for DLMS/COSEM communication profile standards Status: Valid
Similar standardsGB/T 15284 GB/T 17215.321 GB/T 34067.2 GB/T 17215.241 GB/T 17215.301 GB/T 17215.610Basic dataStandard ID: GB/Z 17215.611-2021 (GB/Z17215.611-2021)Description (Translated English): Electricity metering data exchange - The DLMS/COSEM suite - Part 11: Template for DLMS/COSEM communication profile standards Sector / Industry: National Standard Classification of Chinese Standard: N22 Word Count Estimation: 15,158 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GBZ17215.611-2021: Electricity metering data exchange - The DLMS/COSEM suite - Part 11: Template for DLMS/COSEM communication profile standards---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. GB /Z 17215:611-2021 Electricity metering data exchange -- The DLMS/COSEM suite -- Part 11: Template for DLMS/COSEM communication profile standards ICS 17:220:20 CCSN22 National Standardization Guiding Technical Document of the People's Republic of China Electrical measurement data exchange DLMS/COSEM components Part 11: DLMS/COSEM Communication Configure standard templates (IEC TS62056-1-1:2016, Electricitymeteringdataexchange- 2021-12-31 Released 2022-07-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface I Introduction III 1 Scope 1 2 Normative references 1 3 Terms and Definitions and Abbreviations 2 3:1 Terms and Definitions 2 3:2 Abbreviations 3 4 Target Communication Environment 3 5 Use of this configuration communication layer 3 5:1 Information related to the use of standards specifying lower layers3 5:2 Structure of the communication configuration 4 5:3 Low-level protocol layers and their use 5 5:4 Service Mapping and Adaptation Layer 5 5:5 Registration and connection management5 6 Identification and addressing schemes5 7 Specific considerations for application-layer services6 7:1 Overview 6 7:2 Establishment and Release of Application Associations: ACSE Services 6 7:3 xDLMS Services 6 7:4 Security Mechanisms 6 7:5 Transmission of long application messages 6 7:6 Media Access, Bandwidth and Timing Considerations 6 7:7 Other considerations7 8 Communication parameter configuration and management 7 9 COSEM application process 7 10 Additional Notes on Using This Communication Configuration 7 Appendix A (Informative) Example 8 Appendix B (Normative) New COSEM Interface Classes and OBIS Codes 9 forewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted: GB/T 17215 "Alternating current measurement equipment" is divided into several parts, GB/T 17215:6 "Electrical measurement data exchange DLMS/COSEM" Components" has released the following sections: --- Part 10: Standardization framework for intelligent measurement; --- Part 11: Templates for DLMS/COSEM communication configuration standards; --- Part 31: Local area network use based on twisted pair carrier signal; --- Part 46: Data link layer using HDLC protocol; --- Part 47: DLMS/COSEM transport layer based on IP network; --- Part 53: DLMS/COSEM application layer; --- Part 61: Object Identification System (OBIS); --- Part 62: COSEM interface class; --- Part 73: Wired and wireless M-Bus communication configuration for local and community networks; --- Part 76: HDLC-based connection-oriented three-layer communication configuration; --- Part 91: Access to DLMS/COSEM server communication via COSEM Access Service (CAS) using Web Services configure; --- Part 97: Communication configuration based on TCP-UDP/IP network: This document is the 11th part of GB/T 17215:6 "DLMS/COSEM Components for Electrical Measurement Data Exchange": This document uses the translation method equivalent to IEC TS62056-1-1:2016 "Electrical Measurement Data Exchange DLMS/COSEM Components Part 1-1" Part: DLMS/COSEM Communication Configuration Standard Template": The Chinese documents that have a consistent correspondence with the international documents normatively cited in this document are as follows: ---GB/T 17215:610-2018 Electrical Measurement Data Exchange DLMS/COSEM Components Part 10: Smart Measurement Standards Standardization framework (IEC 62056-1-0:2014, IDT); ---GB/T 17215:647-2021 Electrical measurement data exchange DLMS/COSEM components Part 47: IP-based network DLMS/COSEM transport layer (IEC 62056-4-7:2015, IDT); ---GB/T 17215:653-2018 Electrical Measurement Data Exchange DLMS/COSEM Components Part 53: DLMS/CO- SEM application layer (IEC 62056-5-3:2017, IDT); ---GB/T 17215:661-2018 Electrical Measurement Data Exchange DLMS/COSEM Components Part 61: Object Identification System System (OBIS) (IEC 62056-6-1:2017, IDT); ---GB/T 17215:662-2018 Electrical measurement data exchange DLMS/COSEM components Part 62: COSEM connection Class (IEC 62056-6-2:2017, IDT); ---GB/T 17215:697-2018 Electrical Measurement Data Exchange DLMS/COSEM Components Part 97: Based on TCP- Communication configuration for UDP/IP networks (IEC 62056-9-7:2013, IDT): The following editorial changes have been made to this document: --- Standard name changed from Part 1-1 to Part 11: Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by China Machinery Industry Federation: This document is under the jurisdiction of the National Standardization Technical Committee of Electrical Instrumentation (SAC/TC104): This document is drafted by: Yunnan Power Grid Co:, Ltd:, Harbin Electrical Instrument Research Institute Co:, Ltd:, Shenzhen Pusong Electronics Co:, Ltd: Company, Wasion Information Technology Co:, Ltd:, Hangzhou Juhua Technology Co:, Ltd:, State Grid Jilin Electric Power Co:, Ltd: in marketing services Heart, Guangxi Power Grid Co:, Ltd:, Inner Mongolia Electric Power (Group) Co:, Ltd:, Shenzhen Kelu Electronic Technology Co:, Ltd:, Ningbo Samsung Medical Electric Co:, Ltd:, Hangzhou Baifu Electronic Technology Co:, Ltd:, Henan Xuji Instrument Co:, Ltd:, Qingdao Dingxin Communication Co:, Ltd: Co:, Ltd:, Hangzhou Haixing Zeke Information Technology Co:, Ltd:, Yantai East Weston Electric Co:, Ltd:, Beijing Zhongzhao Loongson Software Technology Co:, Ltd: Co:, Ltd:, Shenzhen Xianxing Electric Technology Co:, Ltd:, Zhejiang Chentai Technology Co:, Ltd:, State Grid Jiangsu Electric Power Co:, Ltd: Service Center, Huali Technology Co:, Ltd:, State Grid Shandong Electric Power Company: The main drafters of this document: Shen Xin, Guan Wenju, Zou Lianming, Xiao Linsong, Guo Yuanyue, Tang Weining, Yang Zhou, Yan Bofeng, Zhang Shuhong, Yao Liben, Xu Chenggang, Li Ruyi, Diao Ruipeng, Guo Jianbo, Wang Kechuan, Guo Xiaoguang, Fei Guihuai, Zhao Wei, Duan Meimei, Zeng Shitu:IntroductionAt present, energy saving, emission reduction, low carbon, environmental protection and the establishment of a sustainable society have become a global consensus: Countries actively build regional capacity Energy management system to promote efficient and scientific utilization of energy: On this basis, IEC /TC57, IEC /TC13 and EN/TC294 A DLMS/COSEM energy measurement system transmission protocol is established, in which the electric energy part is completed by IEC 62056, and the non-electricity part is completed by EN 13757 to complete: Countries around the world have successively converted IEC 62056 into their own national standards: To establish a globally unified and open interoperability: In my country, IEC 62056-XY is equivalently converted into GB/T 17215:6XY: GB/T 17215 "Alternating Current Measurement Equipment" is divided into several parts, GB/T 17215:6 "Electrical Measurement Data Exchange DLMS/ COSEM Components" is intended to consist of the following 25 parts: --- Part 10: Smart measurement standardization framework: The purpose is to understand this series of standard architecture, interoperability, information security, etc: information: --- Part 11: DLMS/COSEM communication configuration standard template: The purpose is to establish the communication configuration standard to follow template: --- Part 31: Local area network use based on twisted pair carrier signal: A local area network designed to use twisted pair carrier signals to comply with specification: --- Part 41: Data exchange using wide area network: Public switched telephone network (PSTN) with LINK protocol: The purpose is to use Specification to be followed by the public switched telephone network with the LINK protocol: --- Part 42: Physical layer service process for connection-oriented asynchronous data exchange: The purpose is for objects that use asynchronous data exchange The specification that the management layer connection process follows: --- Part 46: The data link layer using the HDLC protocol: The purpose is to follow the data using the HDLC asynchronous communication protocol set Specification of the link layer: --- Part 47: DLMS/COSEM transport layer based on IP network: The purpose is to use DLMS/IP network The specification followed by the COSEM transport layer: --- Part 51: Application layer protocols: The purpose is to give the communication architecture between the transport layer and the metering device described in DL/T 790:441 application layer: --- Part 52: Communication protocol management Distribution Line Message Specification (DLMS) server: The purpose is to provide IEC 62056-3-1, The protocol management DLMS server of IEC 62056-4-1 and IEC 62056-5-1 is consistent with and different from DL/T 790:441: --- Part 53: DLMS/COSEM application layer: The purpose is to give the application of DLMS/COSEM client and server Layer structure, services and protocols: --- Part 58: Smart Message Language (SML): The purpose is to give the construction of SML based on XML syntax for use in TCP/IP Internet language: --- Part 61: Object Identification System (OBIS): The purpose is to specify a unique identifier for data in electrical measuring equipment: --- Part 62: COSEM interface class: The purpose is to specify the instrument model and construct the instrument function in the form of interface class: --- Part 69: Common Information Model Message Set (IEC 61968-9) and DLMS/COSEM (IEC 62056) data model and protocol Mapping between sessions: The purpose is to exchange information with the master station ERP, and give the mapping between CIM and DLMS/COSEM: --- Part 73: Wired and wireless M-Bus communication configuration for local and community networks: The purpose is to use wired and wireless M- The specification that the bus's mode follows: --- Part 75: Local network (LN) communication configuration for local data transfer: The purpose is to use the local network mode to follow specification: --- Part 76: HDLC-based connection-oriented three-layer communication configuration: A connection-oriented connection that aims to use HDLC The specification that DLMS/COSEM three-layer mode follows: --- Part 82: Mesh communication configuration for community networks: The purpose is to use the specifications that the wireless mesh mode follows: --- Part 83: Community network PLCS-FSK communication configuration: The purpose is to use the specifications that the PLCS-FSK mode follows: --- Part 84: Narrowband OFDMPRIMEPLC communication configuration for community networks: The purpose is to use OFDMPRIME The specification that the PLC mode follows: --- Part 85: Community network narrowband OFDMG3-PLC network communication configuration: The purpose is to use the OFDG3-PLC mode specifications to follow: --- Part 86: Community network high-speed PLCISO /IEC 12139-1 configuration: The purpose is to use PLCISO /IEC 12139-1 The specification that the schema follows: --- Part 88: Communication configuration for ISO /IEC 14908 series networks: The purpose is to use the ISO /IEC 14908 schema to follow specification: --- Part 91: Communication configuration for accessing DLMS/COSEM servers via COSEM Access Services (CAS) using Web services set: The purpose is to adopt the specifications that the Web server pattern follows: --- Part 97: Communication configuration based on TCP-UDP/IP network: The purpose is to use the TCP-UDP/IP mode to follow the specification: This document defines templates for establishing IEC 62056 communication configuration standards that follow IEC 62056-1-0 Standardized framework: Note: It is foreseeable that this technical specification (TS) will be integrated into the next edition of IEC 62056-1-0 as an informative appendix to the standard: In particular, this template is suitable for establishing communication configuration standards to specify how DLMS/COSEM can be used on specific communication technologies, which Here, it is assumed that these specific communication technologies have been defined by specific communication standards: The purpose of this template is to: --- improve the readability of the standard; ---Improve the efficiency of developing communication protocol standards: In the introduction to the IEC 62056 communication configuration standard, delete the above text (starting from "Definitions in this document" to "Improving Efficiency of the Configuration Standard"), add the following text: According to IEC 62056-1-0, IEC 62056DLMS/COSEM components provide specific communication media related to intelligent measurement Communication configuration standard: These communication profile standards specify how the COSEM data model and the DLMS/COSEM application layer can protocol layer): The communication profile standard is part of the IEC 62056 DLMS/COSEM component or any other open communication standard: This document specifies the communication of the DLMS/COSEM used in the < A brief description of the added communication technology and the covered intelligent measurement interface> configuration: It follows the rules specified in Annex A of IEC 62056-5-3:2016: Add a paragraph to demonstrate the relevance of the standard by summarizing the main use cases for this configuration: Electrical measurement data exchange DLMS/COSEM components Part 11: DLMS/COSEM Communication Configure standard templates The title of the IEC 62056 communication configuration standard should be: Electrical measurement data exchange DLMS/COSEM components in:1 ScopeThis document defines a template for the IEC 62056 communication configuration standard: It gives a "table of contents" for such standards and guidance on developing the content of the relevant chapters: Note: The font of the guidance content given in this document is in italics: In the "Scope" of the IEC 62056 communication configuration standard, delete the above text and add the following: This document specifies the DLMS/COSEM communication for < Brief description of additional communication techniques and covered smart measurement interfaces> DLMS/COSEM communication configuration: The scope of this communication configuration standard is limited to the communication protocols used in conjunction with the COSEM data model and the DLMS/COSEM application layer Content: The data structures of a specific communication protocol are beyond the scope of this communication configuration standard, and they should be included in the specific protocol standard: Regulation: Definitions of any project-specific data structure and data content can be provided in the project-specific companion specification: Add other relevant information to identify what is or is not in the "scope" of this Communication Profile:2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document: Normative references in this document are listed here: IEC 62056-1-0 Electrical Measurement Data Exchange DLMS/COSEM Components Part 1-0: Standardization Framework for Smart Measurements (Electricitymeteringdataexchange-TheDLMS/COSEMsuite-Part 1-0:Smartmeteringstandard- isationframework) IEC 62056-4-7 Electrical measurement data exchange DLMS/COSEM components Part 4-7: IP-based network DLMS/ COSEM transport layer (ElectricitymeteringDataexchange-TheDLMS/COSEMsuite-Part 4-7:DLMS/ ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GBZ17215.611-2021_English be delivered?Answer: Upon your order, we will start to translate GBZ17215.611-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GBZ17215.611-2021_English with my colleagues?Answer: Yes. The purchased PDF of GBZ17215.611-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
