GB/T 9343-2008 English PDF

US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9343-2008: Test method for flammability of plastics -- Determination of flash-ignition temperature and self-ignition temperature
Status: Valid

GB/T 9343: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 9343-2008	169	Add to Cart	3 days	Test method for flammability of plastics -- Determination of flash-ignition temperature and self-ignition temperature	Valid
GB/T 9343-1988	319	Add to Cart	3 days	Test method for flammability of plastics--Flash-ignition temperature and self-ignition temperature test	Obsolete

Similar standards

GB/T 8813   GB/T 9640   GB/T 9341   GB/T 1040.1   GB/T 9352   

Basic data

Standard ID: GB/T 9343-2008 (GB/T9343-2008)
Description (Translated English): Test method for flammability of plastics -- Determination of flash-ignition temperature and self-ignition temperature
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G31
Classification of International Standard: 83.080.01
Word Count Estimation: 7,720
Date of Issue: 2008-06-30
Date of Implementation: 2009-02-01
Older Standard (superseded by this standard): GB/T 9343-1988
Adopted Standard: ASTM D1929-1996 (2001), MOD
Regulation (derived from): Announcement of Newly Approved National Standards No. 10 of 2008 (total 123)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the determination of a hot air furnace temperature and flashover plastic ignition temperature approach. This standard applies to plastic flash ignition temperature and ignition temperature determination. This standard test results comparing different materials under test conditions ignition characteristics, can be material under the test conditions described in the minimum ignition temperature of the surrounding air, in actual use conditions, test results can be used as the standard material of ignition sensitivity classification basis. This standard does not directly measure the combustion performance plastics, combustion speed or the maximum temperature of the safe use of the standards alone can not describe or assess actual fire conditions materials, products or assemblies fire hazard. Nevertheless, test results can be used as a fire risk assessment factor.

GB/T 9343-2008: Test method for flammability of plastics -- Determination of flash-ignition temperature and self-ignition temperature

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for flammability of plastics. Determination of flash-ignition temperature and self-ignition temperature ICS 83.080.01 G31 National Standards of People's Republic of China Replacing GB/T 9343-1988 Performance test method of burning plastic Determination of flash and auto-ignition temperature, ignition temperature Posted 2008-06-30 2009-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This revised standard adopts ASTMD1929.1996 (2001) "plastic ignition temperature test methods." This standard ASTMD1929.1996 (2001) compared to the main changes are as follows. Name --- standard was revised, and the unity of our series of standards; --- Made changes in the write mode; --- The Chapter 1, Chapter 4, Chapter 1 of the merger; --- Deleted the Chapter 10 and appendix. This standard replaces GB/T 9343-1988 "Test Method for Determination of flammability of plastic flash point and auto-ignition point." This standard compared with GB/T 9343-1988, the main differences are as follows. --- Means of ignition performance hot air furnace has been modified; --- On the ignition performance has been modified; --- On size and quality inspection of the sample has been modified; --- For inspection rules were modified. The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee of plastic (SAC/TC15) centralized. This standard is drafted by. Ministry of Public Security Shanghai Fire Research Institute, the National Quality Supervision and Inspection Center of synthetic resin. The Standard participating units. Blonde Technology Co., Ltd., Sinopec hospital north of the National Chemical Building Materials Testing Center (Materials Testing Section), National Plastic Products Quality Supervision and Inspection Center (Fuzhou), Jiangning District analytical instrument factory. The main drafters. Zhang Zhengmin, Dai Yu, Ge Liang, Wang ring, Zhu Qing, Ho Bo, Li Jianjun, who Dongmei, Wang Jiandong, Wang Fuhai. This standard replaces the standards previously issued as follows. --- GB/T 9343-1988. Performance test method of burning plastic Determination of flash and auto-ignition temperature, ignition temperature

1 Scope

This standard specifies the method for determining flashover temperature of the plastic and the auto-ignition temperature of the hot air furnace. This standard applies to the determination of plastic flash and auto-ignition temperature of the combustion temperature. The results of this standard to compare different materials in the ignition properties under test conditions, may be described in the material under test conditions on fire The minimum ambient air temperature; in actual use conditions, the present standard test results can be used as the material of the ignition sensitivity classification in accordance with. This standard does not directly measure the maximum temperature of the combustion properties of plastics, combustion speed or the safe use of this standard can not be described separately Evaluation of fire or hazardous materials, products, or assemblies under actual fire situation. However, the test results can be used as fire risk Evaluate one of the factors.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB 2918-1998 standard plastic sample conditioning and environmental tests (idt ISO 291.1997)

3 Terms and Definitions

The following terms and definitions apply to this standard. 3.1 Under certain experimental conditions, the material released from the combustible gas flame can be lit, when the minimum temperature of the ambient air sample is called Flashover temperature of the material. 3.2 Slowly decomposed by the material and cause carbonization, solid phase material flameless, combustion zone with luminescence combustion. 3.3 Under certain experimental conditions, burning or glowing combustion takes place without any source of ignition case, when the minimum temperature of the surrounding air is called the Material Self-ignition temperature.

4 Test Instruments

4.1 hot air oven shown in Figure 1, consists of a set of electrical heating device and the composition of the sample plate. 4.2 furnace tubes made of silicon carbide. An inner diameter of 100mm ± 5mm, length 240mm ± 20mm, temperature not lower than 750 ℃. Vertical furnace tube Directly placed above the clean-up waste plug. Within 4.3 effective refractory material. An inner diameter of 75mm ± 2mm, length 240mm ± 20mm, wall thickness 3mm, temperature is not lower than 750 ℃. The inner tube is placed in the furnace tube with a refractory three small pad paving, hearth above 20mm ± 2mm. The top of a refractory material ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 9343-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 9343-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 9343-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 9343-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 9343-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9343-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.