GB/T 9119-2010 English PDFUS$559.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 9119-2010: Slip-on-welding plate steel pipe flanges Status: Obsolete GB/T 9119: Historical versions
Basic dataStandard ID: GB/T 9119-2010 (GB/T9119-2010)Description (Translated English): Slip-on-welding plate steel pipe flanges Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J15 Classification of International Standard: 23.040.60 Word Count Estimation: 14,194 Date of Issue: 1/14/2011 Date of Implementation: 10/1/2011 Older Standard (superseded by this standard): GB/T 2506-2005; GB/T 9119-2000 Quoted Standard: GB/T 9112; GB/T 9124 Adopted Standard: ASME B16.5-2009, MOD; EN 1092-1-2007, MOD Regulation (derived from): Announcement of Newly Approved National Standards No. 2 of 2011 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies Nominal labeled with PN plate flat welding steel pipe flange type, size, technical requirements and marking. This Standard is applicable to nominal pressure PN 2. 5 ~ PN plate flat welding steel pipe flanges 100. GB/T 9119-2010: Slip-on-welding plate steel pipe flanges---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Slip-on-welding plate steel pipe flanges ICS 23.040.60 J15 National Standards of People's Republic of China Replacing GB/T 9119-2000, GB/T 2506-2005 Plate flat welding steel pipe flanges Issued on. 2011-01-14 2011-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 9112 ~ 9124-2010 "steel pipe flanges" series Standard is a modified ASMEB16.5-2009 "pipe flanges and flanged pipe Member (NPS⅟2 ~ NPS24) "and EN1092-1.2007" Flanges and their connecting pipes, valves, fittings and accessories, circular flange, PN identification - Part 1. Steel flanges. " ASMEB16.5-2009 is a complete standards for Class marks flange, EN1092-1.2007 is a complete standard PN mark on the flange. This series of standards using a combination of the above two criteria, including Mark the relevant technical content Class flange and flange PN mark. This series of standards for a total 13 standard, this standard is one of a standard. This standard EN1092-1.2007 standard main difference is as follows. --- The preparation of this standard format and EN1092-1.2007 different standards; --- EN1092-1.2007 standard does not include two DN175 and DN225 nominal size, according to users of marine flange Requirements, this series of standards PN flange marked increase of DN175 and DN225 only two male marine said flange size. This standard replaces GB/T 9119-2000 "flat panel projecting flat welded steel pipe flanges", GB/T 2506-2005 "ship lap welding steel Flange (four into bits) ", compared with the original standard main changes are as follows. --- The original GB/T 9119-2000 and GB/T 2506-2005 integrated as a standard; --- According to EN1092-1.2007 standard, the nominal pressure range PN labeled expanded from the original PN2.5 ~ PN40 to PN2.5 ~ PN100; --- PN flange marked increase in the DN175 and DN225 only two male Marine flange nominal size; --- According to EN1092-1.2007 standard, flange dimensions data PN-labeled comprehensive revision; --- Various sealing surface increases the scope of application form. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee pipe accessories. This standard was drafted. the machine Productivity Promotion Center, Jiangsu Haida Pipe Fittings Group Co., Ltd. Bengbu City Zhongyuan fabrication of pipe fittings Limited, St-day Group of Hebei Bao silver high-pressure pipe flanges Limited, China Shipbuilding Technology and Economy Research Institute, Zhejiang Chaoda Valve Co., Ltd., a Group Ltd. Paul. The main drafters of this standard. Li Junying, to Qiu, Li, Wangqing Yao, Li Bao silver, Feng Feng, Yan Jing Wen, send Luo Yuan, Chen Youjun. This standard replaces the standards previously issued as follows. --- GB/T 9119.1 ~ 9119.10-1988, GB/T 9119-2000; --- GB/T 2506-1989, GB/T 2506-2005. Plate flat welding steel pipe flanges1 ScopeThis standard specifies the nominal pressure PN with marked plate flat welding steel pipe flange type, size, technical requirements and marking. This standard applies to nominal pressure plate flat welding steel pipe flanges PN2.5 ~ PN100 in.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 9112 steel pipe flanges with type parameters GB/T 9124 steel pipe flanges3 type and size3.1 plate flat welding steel pipe flange sealing surface type with PN-labeled and applicable nominal and nominal size range according to Table 1 Provisions. Table 1 plate flat welding steel pipe flange sealing surface type and labeled with PN nominal pressure applied and the nominal size range Sealing surface Type Nominal PN2.5 PN6 PN10 PN16 PN25 PN40 PN63 PN100 Plane (FF) DN10 ~ DN2000 DN10 ~ DN2000 DN10 ~ DN2000 DN10 ~ DN2000 DN10 ~ DN800 DN10 ~ DN600 Raised face (RF) DN10 ~ DN2000 DN10 ~ DN2000 DN10 ~ DN2000 DN10 ~ DN2000 DN10 ~ DN800 DN10 ~ DN600 DN10 ~ DN400 DN10 ~ DN350 3.2 plate flat welding steel pipe flange type shall comply with Figs. 1 and 2, the flange dimensions comply with the requirements of Tables 2 to 9. Figure 1 plane (FF) plate flat welding steel pipe flanges (Applicable to PN2.5, PN6, PN10, PN16, PN25 and PN40) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 9119-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 9119-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 9119-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 9119-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 9119-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9119-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
