GB/T 9114-2010 English PDF

US$559.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9114-2010: Hubbed screwed steel pipe flanges
Status: Obsolete

GB/T 9114: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 9114-2010	559	Add to Cart	4 days	Hubbed screwed steel pipe flanges	Obsolete
GB/T 9114-2000	479	Add to Cart	4 days	Hubbed screwed steel pipe flanges with raised face	Obsolete
GB/T 9114.1-1988	199	Add to Cart	2 days	Hubbed screwed steel pipe flanges with raised face for PN 0. 6MPa (6 bar)	Obsolete

Similar standards

GB/T 12385   GB/T 9125.2   GB/T 9125.1   GB/T 9126.1   GB/T 9124.2   GB/T 9124.1   

Basic data

Standard ID: GB/T 9114-2010 (GB/T9114-2010)
Description (Translated English): Hubbed screwed steel pipe flanges
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J15
Classification of International Standard: 23.040.60
Word Count Estimation: 14,178
Date of Issue: 1/14/2011
Date of Implementation: 10/1/2011
Older Standard (superseded by this standard): GB/T 9114-2000
Quoted Standard: GB/T 7306.1; GB/T 7306.2; GB/T 9124; GB/T 12716
Adopted Standard: ASME B16.5-2009, MOD; EN 1092-1-2007, MOD
Regulation (derived from): Announcement of Newly Approved National Standards No. 2 of 2011
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies the nominal labeled with PN and Class tagged with neck with steel pipe flange type, size, technical requirements and marking. This Standard is applicable to nominal pressure PN 6 ~ PN 100 and Class 150 ~ Class 2500 with neck steel pipe flanges.

GB/T 9114-2010: Hubbed screwed steel pipe flanges

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Hubbed screwed steel pipe flanges ICS 23.040.60 J15 National Standards of People's Republic of China Replacing GB/T 9114-2000 Steel pipe flange with neck Issued on. 2011-01-14 2011-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 9112 ~ 9124-2010 "steel pipe flanges" series Standard is a modified ASMEB16.5-2009 "pipe flanges and flanged pipe Member (NPS⅟2 ~ NPS24) "and EN1092-1.2007" Flanges and their connecting pipes, valves, fittings and accessories, circular flange, PN labeled Part 1. steel flanges. " ASMEB16.5-2009 is a complete standards for Class marks flange, EN1092-1.2007 is a complete standard PN mark on the flange. This series of standards using a combination of the above two criteria, including Mark the relevant technical content Class flange and flange PN mark. This series of standards for a total 13 standard, this standard is one of a standard. This standard ASMEB16.5-2009 and EN1092-1.2007 standard main difference is as follows. --- The preparation of this standard format ASMEB16.5-2009 and EN1092-1.2007 different standards; --- ASMEB16.5-2009 standard includes data Class400 nominal pressure of the flange, this standard does not incorporate Class400 Flange data; --- ASMEB16.5-2009 standard includes flange nominal size of the data NPS3⅟2, this standard does not NPS3⅟2 law LAN data; --- ASMEB16.5-2009 standard with inch bolt, bolt aperture is also used in inch sizes, this standard to metric bolts, Aperture pattern also metric dimensions. This standard replaces GB /"projecting face with a steel pipe flanges with neck," compared with the original T 9114-2000 standard main changes are as follows. --- According to EN1092-1.2007 standard, the male flange PN labeled nominal size range expanded from the original DN10 ~ DN150 To DN10 ~ DN600; --- According to EN1092-1.2007 standard, the flange nominal pressure range PN labeled expanded from the original to PN6 ~ PN40 PN6 ~ PN100; --- According ASMEB16.5-2009 standard flange nominal pressure range Class marks from the original Class150 ~ Class1500 expanded to Class150 ~ Class2500; --- According to EN1092-1.2007 standard, flange dimensions data PN-labeled comprehensive revision; --- According ASMEB16.5-2009 standard, flange dimensions data Class marks a comprehensive modification; --- Increasing the variety of sealing surface of the scope of application form; --- Marked revised; --- According ASMEB16.5-2009, belonging to the original standard flange nominal inter-American system has been modified tag; PN20 To Class150, PN50 to Class300, PN110 to Class600, PN150 to Class900, PN260 To Class1500, PN420 to Class2500. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee pipe accessories. This standard was drafted. the machine Productivity Promotion Center, Zhejiang Chaoda Valve Co., Ltd., Jiangsu Haida Pipe Fittings Group Co., Ltd. Hebei Shengtian Group Bao silver high-pressure pipe flanges Limited, Paul Group Co., Ltd.. The main drafters of this standard. Li Junying, to Qiu, Li, Feng Feng, Chenyou Jun, Lin Jie, Li Po and silver. This standard replaces the standards previously issued as follows. --- GB/T 9114.1 ~ 9114.3-1988, GB/T 9114-2000. Steel pipe flange with neck

1 Scope

This standard specifies the nominal pressure and marked with a PN with Class labeled with neck steel pipe flange type, size, technical requirements And tags. This standard applies to nominal pressure PN6 ~ PN100 and neck with a steel pipe flanges with Class150 ~ Class2500 of.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. Part 1 GB/T 7306.1 55 ° sealing pipe thread. inner cylindrical thread and taper external thread Part 2 GB/T 7306.2 55 ° sealing pipe thread. inner Taper internal and external threads GB/T 9124 steel pipe flanges GB/T 12716 60 ° sealing pipe thread

3 type and size

3.1 with PN labeled with neck steel pipe flange type and size 3.1.1 with PN labeled with neck steel pipe flange sealing surface type and application of nominal pressure and nominal size range according to Table 1 Provisions. Table 1 marked with a PN with neck steel pipe flange sealing surface type and application of nominal pressure and nominal size range Sealing surface Type Nominal PN6 PN10 PN16 PN25 PN40 PN63 PN100 Plane (FF) DN10 ~ DN300 DN10 ~ DN600 DN10 ~ DN600 DN10 ~ DN600 - Raised face (RF) DN10 ~ DN300 DN10 ~ DN600 DN10 ~ DN1000 DN10 ~ DN600 DN10 ~ DN150 3.1.2 with PN labeled with neck steel pipe flange type shall comply with Figs. 1 and 2, the flange dimensions should be in accordance with Table 2 ~ Specified in Table 8. Figure 1 plane (FF) with neck steel pipe flanges (Suitable for PN6, PN10, PN16, PN25 and PN40) ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 9114-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 9114-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 9114-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 9114-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 9114-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9114-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.