GB/T 8873-2008 English PDFUS$1219.00 ยท In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 8873-2008: Terminology of grain and oils -- Oils and fats industry Status: Valid GB/T 8873: Historical versions
Basic dataStandard ID: GB/T 8873-2008 (GB/T8873-2008)Description (Translated English): Terminology of grain and oils -- Oils and fats industry Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: X04 Classification of International Standard: 67.040 Word Count Estimation: 55,519 Date of Issue: 2008-11-04 Date of Implementation: 2009-01-20 Older Standard (superseded by this standard): GB/T 8873-1988 Regulation (derived from): National Standard Approval Announcement 2008 No.18 (Total No.131) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the oil industry terminology and definitions, including oil preparation, nouns oil processing and the technical and economic indicators, terms and definitions. This standard applies to oil industry -related teaching and research, areas such as operations and management, production and processing. GB/T 8873-2008: Terminology of grain and oils -- Oils and fats industry---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Terminology of grain and oils. Oils and fats industry ICS 67.040 X04 National Standards of People's Republic of China Replacing GB/T 8873-1988 Oils Oil Industry Terminology Posted 2008-11-04 2009-01-20 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard is a revision of GB/T 8873-1988 "oil industry terminology," the. This standard GB/T 8873-1988 and the main technical differences are as follows. --- Increased water ENZYMIC oil supercritical extraction 93 terminology; --- Remove the physicochemical characteristics 53 terminology; --- Modify the original standard pre-treatment, hydration, and other 22 students embryo terminology; --- Modify the original standard part of the terminology of the English name; --- Standardized Chinese characters in the original standard part of the terminology used. From the date of implementation of this standard instead of GB/T 8873-1988 "oil industry terminology." The standard proposed by the National Food Authority. This standard by the National Standardization Technical Committee OILS. This standard was drafted. State Grain Reserve Xi'an Oil Research and Design Institute, Wuhan Polytechnic University. The main drafters of this standard. Chen Yan, Shixuan Ming, Zhang Li, Liang Yu column, Meng Jia, He Dongping, Luo quality. This standard replaces the standards previously issued as follows. --- GB/T 8873-1988. Oils Oil Industry Terminology1 ScopeThis standard specifies the terminology and definitions oil industry, including the preparation of oil noun, oil processing and technical and economic indicators of the term And definitions. This standard applies to the field of scientific research, production, processing, management and teaching related to oil industry.2 Preparation of term grease2.1 Before fuel into the press (or extractor) collectively processing step. 2.1.1 Oil removing impurities contained general process. 2.1.1.1 Utilizing a particle size (width, thickness, length) of the difference between the oil and the impurities, separation of impurities by the process of the sieve. 2.1.1.2 The speed difference between the use of suspended oil and impurities, with the wind impurity removal methods. 2.1.1.3 Oil removal method using a magnetic force of magnetic metal impurities. 2.1.1.4 Also known as "water." Water method for removing oil in the soil and other impurities. 2.1.1.5 Also known as "mud go together." Using mechanical force will be similar to the size of the mud and oil seed crushing, screening or winnowing and then clear the way. 2.1.1.6 Truncated conical sieve is a horizontal hexagonal prism, compared with the feed end to the discharge end of the small, around the column axis of the screening machine. 2.1.1.7 For screening mechanical cotton hulls kernel separation. Screen at the end by a number of semi-fixed sieve composition, each half shaft are mounted above the screen There dozen rods. 2.1.1.8 Also known as "round play screen." Rotating shaft with bar fight, and the screen cylinder axis at different speeds and direction of rotation of the round screen. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 8873-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 8873-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 8873-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8873-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 8873-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8873-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
