GB/T 8582-2008 English PDFUS$579.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 8582-2008: Terminology for mechanical structures of electrotechnical and electronic equipment Status: Valid GB/T 8582: Historical versions
Basic dataStandard ID: GB/T 8582-2008 (GB/T8582-2008)Description (Translated English): Terminology for mechanical structures of electrotechnical and electronic equipment Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K05 Classification of International Standard: 31.240 Word Count Estimation: 25,226 Date of Issue: 2008-06-19 Date of Implementation: 2009-04-01 Older Standard (superseded by this standard): GB/T 8582-2000 Regulation (derived from): Announcement of Newly Approved National Standards No. 10 of 2008 (total 123) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the mechanical structure of the electrical and electronic equipment generic term. This standard applies to electrical and electronic equipment mechanics areas of expertise, for revision of the standard, scientific literature and writing and publishing books, the mechanical structure of corporate management, product development and design use. GB/T 8582-2008: Terminology for mechanical structures of electrotechnical and electronic equipment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Terminology for mechanical structures of electrotechnical and electronic equipment ICS 31.240 K05 National Standards of People's Republic of China Replacing GB/T 8582-2000 Electrical and electronic equipment mechanical structure terminology Posted 2008-06-19 2009-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 8582-2000 "electrical and electronic equipment mechanical structural terms." This standard compared with GB/T 8582-2000, the main changes are as follows. --- According to GB/T 19290.1 \u200b\u200bmodify GB/T 8582-2000 in the corresponding terms and definitions; --- For the GB/T 19290.1 \u200b\u200band has been included in the GB/T 8582-2000 some of the terminology and definitions that are not in accordance with GB/T 19290.1 \u200b\u200bsupplement; --- Remove GB/T 8582-2000 term no longer applies; --- Revised GB/T 8582-2000 in error; --- Added some necessary terms. The standard electrical and electronic equipment by the National Standardization Technical Committee integrated structure (SAC/TC34) and focal points. This standard was drafted. ZTE Corporation, the Quartet Electric (Group) Co., Ltd., Huawei Technologies Co., Ltd., State Grid Nanjing Automation Research Institute, Guodian Nanjing Automation Co., Ltd. The main drafters of this standard. Wang Wei, Aijun, Tian Heng, Zhang Kaiguo, real Zhang, Zhang Yu, Wu Bei. Previous editions of the publication of this standard is replaced by. --- GB/T 8582-1988; --- GB/T 8582-2000. Electrical and electronic equipment mechanical structure terminology1 ScopeThis standard specifies the general term electrical and electronic equipment mechanical structure. This standard applies to electrical and electronic equipment construction machinery specialized for the revision of the standard, scientific literature and write books and publishing companies The mechanical structure of product development, design and management use. 2 orientation (see Table 1) Table 1 No. Definition schematic 2.1 width In the three-dimensional coordinates apparatus (see FIG. 1) of the X-axis Direction (lateral direction) occupied size (see Figure 2 In W) 2.2 depth In the three-dimensional coordinates of the device (see FIG. 1) of the Y-axis Direction (longitudinal direction) occupied size (see Figure 2 In D) 2.3 height In the three-dimensional coordinates of the device (see FIG. 1) of the Z-axis Direction (vertical direction) occupied size (see Figure 2 The H) 2.4 front front Equipment and operator monitoring opposing major surfaces Or operating surface ships equipped monitor or operating components (See FIG. 2) Figure 1 2.5 Behind rear; back Previous apparatus opposite surface (see FIG. 2) 2.6 left left In the left side surface of the operator device (see Figure 2) 2.7 The right right In the right side surface of the operator of the device (see Figure 2) 2.8 Top surface top Equipment for the top (see Figure 2) 2.9 Bottom surface bottom Equipment for the bottom (see Figure 2) Figure 2 2.10 Monitoring surface monitoringsurface Installation monitoring and measurement components of the surface 2.11 Operating surface operatingsurface The main components of the surface mounting operation ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 8582-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 8582-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 8582-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8582-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 8582-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8582-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
