GB/T 8488-2008 English PDFUS$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 8488-2008: Acid resisting bricks and tiles Status: Valid GB/T 8488: Historical versions
Basic dataStandard ID: GB/T 8488-2008 (GB/T8488-2008)Description (Translated English): Acid resisting bricks and tiles Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Q32 Classification of International Standard: 81.060.30 Word Count Estimation: 13,190 Date of Issue: 2008-09-18 Date of Implementation: 2009-05-01 Older Standard (superseded by this standard): GB/T 8488-2001 Adopted Standard: JIS R1535-1991 (1998), NEQ Regulation (derived from): National Standard Approval Announcement 2008 No.16 (Total No.129) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the terms and definitions of acid brick, classification and labeling, technical requirements, test methods, inspection rules, signs, packaging, transport and storage. This standard applies to corrosion and acid brick -lined ground plate used (hereinafter referred to as tiles). Other special products may refer to this standard. GB/T 8488-2008: Acid resisting bricks and tiles---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Acid resisting bricks and tiles ICS 81.060.30 Q32 National Standards of People's Republic of China Replacing GB/T 8488-2001 Acid brick Posted 2008-09-18 2009-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard and the Japanese standard JISR1535-1991 (1998) "chemical industry acid tiles," the non-equivalent. This standard replaces GB/T 8488-2001 "acid-resistant brick." This standard GB/T 8488-2001 content made the following amendments. --- Shape of brick specifications made additions complement the flat type brick 200mm × 200mm and 300mm × 300mm two kinds specification. Appendix A of this standard is an informative annex. This standard was proposed by the State Building Materials Federation. This standard by the National Ceramic Industry Standardization Technical Committee (SAC/TC194) centralized. This standard by the Shandong Industrial Ceramics Research and Design Institute, Sinoma Advanced Materials Co., Ltd. is responsible for drafting. The standard unit of the main participants. Pingxiang City Ceramic Industrial Development Co., Ltd., acid Yangquan City Ceramics Co., Henan Tianlong Ceramics Co., Ltd.. The main drafters of this standard. Li Dongsheng, Lvyan Hong, Jiao Wenqing, secondary Yuan, Han is red, Wang Ning, Shen Bing Shuai, Wang Haiyang, Hou Xiaogang. This standard was first released in 1987, the first revision in 2001. Acid brick1 ScopeThis standard specifies the terms and definitions bricks acid, classification and labeling, technical requirements, test methods, inspection rules, marking, packaging, transportation And storage. This standard applies to corrosion and acid-resistant brick panels lining the ground used (hereinafter referred to as brick). Other shaped products may refer to this standard.2 Terms and definitionsThe following terms and definitions apply to this standard. 2.1 From clay or other non-metallic raw material, molding and sintering process, applied to acid corrosion lining and ground brick or plate resistance Acid products. Divided into glazed tiles and unglazed tiles. 2.2 Not through the glaze of a small gap. 2.3 Due to the impact caused by incomplete. 2.4 Tile presented iron points off the sand, Rongdong bubble point defects and other abnormalities. 2.5 Through the cracks in the glaze. 2.6 Cracks appeared glazed. 2.7 Glazed surface of the article Local unglazed. 2.8 Like orange peel, gloss glazed poor. 2.9 Tarnished glazed. 2.10 Brick flatness error. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 8488-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 8488-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 8488-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8488-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 8488-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8488-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
