GB/T 7113.4-2011 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 7113.4-2011: Flexible insulating sleeving -- Part 4: Glass textile sleeving with acrylic based coating
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 7113.4-2011	209	Add to Cart	3 days	Flexible insulating sleeving -- Part 4: Glass textile sleeving with acrylic based coating	Valid

Similar standards

GB/T 4207   GB/T 5591.2   GB/T 5591.1   GB/T 7113.2   GB/T 7113.1   GB/T 7113.5   

Basic data

Standard ID: GB/T 7113.4-2011 (GB/T7113.4-2011)
Description (Translated English): Flexible insulating sleeving -- Part 4: Glass textile sleeving with acrylic based coating
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K15
Classification of International Standard: 29.035.99
Word Count Estimation: 9,948
Date of Issue: 2011-12-30
Date of Implementation: 2012-05-01
Quoted Standard: GB/T 7113-2003; GB/T 7113.2-2005; GB/T 13534-2009
Adopted Standard: IEC 60684-3-403-2002, MOD
Regulation (derived from): Announcement of Newly Approved National Standards No. 22 of 2011
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard provides for three continuous coating with acrylic and with different breakdown voltages to distinguish (GB/T 7113. 4 403 Type: High breakdown voltage, GB/T 7113. 4 404 Type: Medium breakdown voltage, GB/T 7113. 4 405 types: low breakdown voltage) woven or knitted E-type glass fiber hose requirements. Practice has proved that the hose is suitable for use 155��C and below. Class hose inside diameter 0. 30mm to 25. 00mm usually between a wall thickness between 0. 15mm and 1. 20mm, and has quite the following colors: black, white, red, yellow, blue, brown, green, green/yellow and gray. In addition to this part of the listed sizes or colors, other sizes or colors can be customized according to customer demand. These products, if in addition to other properties outside dimensions are in accordance with Table 2, Table 4 lists the requirements of this section shall be deemed to comply. Who meet the requirements of this part of the material, have reached the established level of performance. However, users in the selection of materials for a particular purpose, the appropriate application based on the actual requirements necessary to choose, and not solely on the basis of this section.

GB/T 7113.4-2011: Flexible insulating sleeving -- Part 4: Glass textile sleeving with acrylic based coating

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Flexible insulating sleeving Part 4. Glass textile sleeving with acrylic based coating ICS 29.035.99 K15 National Standards of People's Republic of China Insulating hose Part 4. acrylic glass fiber hose Part 4. Glasstextilesleevingwithacrylicbasedcoating (IEC 60684-3-403.2002, Flexibleinsulatingsleeving- Part 3. Specificationsforindividualtypesofsleeving- Sheets403. Glasstextilesleevingwithacrylicbasedcoating, MOD) Issued on. 2011-12-30 2012-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 7113 "insulation hose" is divided into the following sections. --- Part 1. Definitions and general requirements; --- Part 2. Test methods; --- Part 3. PVC fiberglass hose; --- Part 4. acrylic glass fiber hose; --- Part 5. Silicone rubber fiberglass hose; --- Part 6. Polyurethane (PUR) glass fiber hose; This section GB/T 7113 Part 4. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses redrafted law revision using IEC 60684-3-403.2002 "insulating sleeving - Part 3. various types of hose Regulation Fan Section 403. acrylic glass fiber hose. " Taking into account China's national conditions, in using IEC 60684-3-403.2002 when this part has made several modifications. Provision about the technical differences And into the body of a single vertical line identifies them involved with the provisions margin. These technical differences are given in Appendix A Its list of reasons for reference. For ease of use, for IEC 60684-3-403.2002 This section also made the following editorial changes. a) Remove the IEC 60684-3-403.2002's directory, foreword and introduction; b) the "normative references" the date listed in the chapter, but the references cited in the text Shiyou undated, all Dated; c) Table 1, NW values \u200b\u200bin Table 3 with "0" padded to two decimal places, so that the inner diameter tolerances after the decimal point The same number of digits, adding a footnote to Table 3 to indicate the use of large diameter hose 6mm diameter mandrel bend test when With samples; d) Table 2 and Table 4 "maximum or minimum" and "requirements" the two columns were combined and used in the appropriate place the symbol "≤" or "≥" indicates; e) Table 3 and Table Mounting related segment breakdown voltage test was placed between 4 Table 4; f) The "± 3K" to "± 3 ℃"; g) increase the informative appendix A guide to use. Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. This part is proposed by the China Electrical Equipment Industrial Association. This part of the National Standardization Technical Committee of the insulating material (SAC/TC51) centralized. This section is drafted. Changshu Jiangnan Glass Fiber Co., Ltd., Hangzhou Xiaoshan insulation material factory, Guilin Electric Apparatus Research Institute. The main drafters of this section. Malin Quan, Zhang Zhigang, Zhang Shengxiang, Li Wei, Luo Zhe. Insulating hose Part 4. acrylic glass fiber hose

1 Scope

GB/T 7113 provisions of this section having three successive acrylate coating and to the breakdown voltage different to distinguish (GB/T 7113.4-403 type. high breakdown voltage; GB/T 7113.4-404 type. medium breakdown voltage; GB/T 7113.4-405 type. low breakdown Voltage) weaving or knitting E glass fiber hose requirements. Practice has proved that the hose is suitable for use below 155 ℃. The inner diameter of the hose such typically between 0.30mm to 25.00mm, the wall thickness between 0.15mm to 1.20mm, and has Following colors. black, white, red, yellow, blue, brown, green, green/yellow and character. In addition to size or color listed in this section, other sizes or colors can be customized according to customer demand. These products, if in addition to foot Other than performance-inch line with Table 2, Table 4 lists the requirements shall be deemed to comply with this section. Who meet the requirements of this part of the materials have reached a given level of performance. However, users in the choice of material for a particular purpose When the application should be based on the actual requirements necessary to choose, and not simply on the basis of this section.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 7113-2003 insulated hose definitions and general requirements (IEC 60684-1. 1980, MOD) GB/T 7113.2-2005 Test methods for insulating sleeving (IEC 60684-2.1997, MOD) GB/T 13534-2009 mark color code (IEC 60757. 1983, IDT)

3 Named

Hoses should be identified by the following naming. In this section, case No. 03,04,05, coated textile fiber pipe symbol "4" plus the distinguishing number "03", "04", "05" composed of "403", "404", "405" correspond to "high breakdown voltage", "medium breakdown voltage", "low breakdown voltage" Type species. Next to the color identified with the acronym also marked hose color, but any color used to represent the abbreviation should be consistent GB/T 13534-2009 requirements. NC stands for "Natural/not colored." Without abbreviations, you can write color designation. When asked to name to distinguish between the hose is woven or knitted from the time should be added to the corresponding word after the above logo. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 7113.4-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 7113.4-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 7113.4-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 7113.4-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.