GB/T 7113.1-2014 English PDFUS$189.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 7113.1-2014: Flexible insulating sleeving -- Part 1: Definitions and general requirements Status: Valid GB/T 7113.1: Historical versions
Basic dataStandard ID: GB/T 7113.1-2014 (GB/T7113.1-2014)Description (Translated English): Flexible insulating sleeving -- Part 1: Definitions and general requirements Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K15 Classification of International Standard: 29.035.99 Word Count Estimation: 8,899 Date of Issue: 7/24/2014 Date of Implementation: 2/1/2015 Older Standard (superseded by this standard): GB/T 7113-2003 Quoted Standard: GB/T 2900.5-2013; GB/T 7113.2-2014; IEC 60304 Adopted Standard: IEC 60684-1-2003, MOD Regulation (derived from): National Standards Bulletin No. 19, 2014 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies the definition of insulation hose and general requirements. This section applies to electrical equipment is mainly used for insulation of insulated conductors and connectors hose. Some models are also suitable for lashing hose, ide GB/T 7113.1-2014: Flexible insulating sleeving -- Part 1: Definitions and general requirements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Flexible insulating sleeving Part 1.. Definitions and general requirements ICS 29.035.99 K15 National Standards of People's Republic of China Replacing GB/T 7113-2003 Insulating hose Part 1. Definitions and general requirements Part 1. Definitionsandgeneralrequirements (IEC 60684-1.2003, MOD) Issued on. 2014-07-24 2015-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 7113 "insulation hose" is divided into the following sections. --- Part 1. Definitions and general requirements; --- Part 2. Test methods; --- Part 3. PVC glass fiber braided hose; --- Part 4. acrylic glass fiber braided hose; --- Part 5. Silicone rubber fiberglass braided hose; --- Part 6. Polyurethane (PUR) glass fiber braided hose; This section GB/T 7113 Part 1. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 7113-2003 "insulation hose Definitions and general requirements", compared with the GB/T 7113-2003 major changes as follows. --- Standard "range" is further described; --- Increasing the "order", "qualification requirements", "correlation between size and/or color," "trust test" and other sections, delete the words "general Requirements "section (see Chapter 6, Section 12, Chapter 13 and Chapter 14, Chapter 5, 2003 edition). This section uses redrafted law revision using IEC 60684-1.2003 "insulating sleeving - Part 1. Definitions and general requirements." this Part of IEC 60684-1.2003 compared to do the following editorial changes. --- Remove the IEC 60684-1.2003's "Introduction", in the "Categories" section adds illustration; --- To avoid suspension segment separately in the "classification", "Size" two chapters increased by 5.1 and 7.1 "General." This part is proposed by the China Electrical Equipment Industrial Association. This part of the National Standardization Technical Committee of the insulating material (SAC/TC51) centralized. This section is drafted. Hangzhou Xiaoshan Insulation Material Factory, Guilin Electric Apparatus Research Institute Limited. The main drafters of this section. Luozhuan Yong, Zhang Shengxiang, Song Yuxia. This part of the standard replaces the previous editions are. --- GB/T 7113-1986, GB/T 7113-2003. Insulating hose Part 1. Definitions and general requirements1 ScopeGB/T 7113 provisions of this part of the definition of insulating hoses and general requirements. This section applies mainly used in electrical equipment and conductors insulation joint insulation hose. Some models of the hose is also suitable for binding, Identification, peripheral sealing and mechanical protection.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2900.5-2013 Electrotechnical terminology insulating solids, liquids and gases (IEC 60050-212.2010, IDT) GB/T 7113.2-2014 insulation hose Part 2. Test methods (IEC 60684-2.2003, MOD) IEC 60304 frequency cables and wires with insulation standard color (Standardcoloursforinsulationforlow-frequency cablesandwires)3 Terms and DefinitionsGB/T 2900.5-2013 defined and the following terms and definitions apply to this document. 3.1 Median centralvalue When the average of the test results are arranged in order of size in the middle of an odd number of test results or even number of times between the two test results. 3.2 Batch consignment One delivery of the same size, all materials type, grade and color.4 SampleIn principle representative of the bulk material according to the contents of the test required to select adequate hoses as a sample. Unless otherwise provided in both supply and demand, Each one delivery size, model and color of the hose should be seen as a single batch. Category 5 5.1 General Hose according to product specification standard code sequence number dash the last three digits classification. The first three digits digit It represents hoses basic types, namely. 1. Common extruded tube, but it does not include a heat shrinkable tube. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 7113.1-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 7113.1-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 7113.1-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 7113.1-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 7113.1-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7113.1-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
