GB/T 7060-2019 English PDFUS$599.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 7060-2019: General specifications for rotary electrical machines in ships Status: Valid GB/T 7060: Historical versions
Basic dataStandard ID: GB/T 7060-2019 (GB/T7060-2019)Description (Translated English): General specifications for rotary electrical machines in ships Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K20 Classification of International Standard: 29.160.01 Word Count Estimation: 30,341 Date of Issue: 2019-05-10 Date of Implementation: 2019-12-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 7060-2019: General specifications for rotary electrical machines in ships---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.General specifications for rotary electrical machines in ships ICS 29.160.01 K20 National Standards of People's Republic of China Replace GB/T 7060-2008 Basic technical requirements for marine rotating electrical machines Published on.2019-05-10 2019-12-01 implementation State market supervision and administration China National Standardization Administration issued ContentForeword III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Classification and naming 3 5 Requirements 4 6 Test method 15 7 Inspection rules 20 8 Packaging, transportation and storage 24 9 spare parts 25 10 Guarantee period 25ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 7060-2008 "Basic Technical Requirements for Marine Rotating Electric Machines". This standard is compared with GB/T 7060-2008. The main technical differences are as follows. --- Increased the ground impulse withstand voltage test content (see 5.7.5); --- Modified the content of the inter-turn shock withstand voltage (see 5.7.4); ---Modified the requirements for grounding requirements (see 5.5.5); --- Modified the distortion of the synchronous generator waveform (see 5.7.12); --- Increased the content of the IP67 enclosure protection level (see 5.5.1); --- Increased the detailed requirements for no-load current and no-load loss of marine motors (see 5.7.6). This standard is proposed and managed by the China Electrical Equipment Industry Association. This standard was drafted. Shanghai Electric Apparatus Research Institute, Shanghai Electric Apparatus Research Institute (Group) Co., Ltd., China Classification Society Shanghai Regulations Fan Research Institute, China Classification Society Shanghai Branch, Dezhou Hengli Motor Co., Ltd., Jiangsu Far East Motor Manufacturing Co., Ltd., Jiangxi Qinghuatai Hao Sanbo Motor Co., Ltd., China Shipbuilding Heavy Industry Motor Co., Ltd., Shanghai Marathon·Innovation Electric Co., Ltd., Shanghai Nanyang Electric Machine Co., Ltd. The main drafters of this standard. Lu Shouxiang, Han Sufang, Lin Biao, Sun Wu, Li Chenhao, Chen Qingshan, Zhang Xin, Qian Wei, Zhou Xiaolong, Zhou Weiqiang, Xu Liwei. The previous versions of the standards replaced by this standard are. ---GB/T 7060-1987, GB/T 7060-1994, GB/T 7060-2008. Basic technical requirements for marine rotating electrical machines1 ScopeThis standard specifies the classification and naming, technical requirements, test methods and inspection rules for marine rotating electrical machines (hereinafter referred to as marine motors). Packaging, transportation and storage, spare parts, warranty period. This standard applies to the design of various types of marine (including mobile and fixed offshore) motors (excluding micro-controlled motors). Manufacturing and acceptance.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 191 packaging storage and transportation icon GB/T 755-2008 Rotating motor rating and performance GB/T 997-2008 Classification of rotary electric machine structure type, installation type and junction box position (IM code) GB/T 1029-2005 Three-phase synchronous motor test method GB/T 1032-2012 Three-phase asynchronous motor test method GB/T 1311-2008 DC motor test method GB/T 1971-2006 Rotary motor line end mark and direction of rotation GB/T 1993-1993 Rotating motor cooling method GB/T 2423.4-2008 Environmental testing of electrical and electronic products - Part 2. Test methods Test Db. alternating heat (12h) 12h cycle) GB/T 2423.17-2008 Environmental testing of electric and electronic products - Part 2. Test method test Ka. salt spray GB/T 2828.1. Sampling procedures for sampling by sampling - Part 1 . Batch-to-batch sampling plan, searched by AQL GB 3836.1-2010 Explosive atmosphere - Part 1. General requirements for equipment GB 3836.2-2010 Explosive atmosphere - Part 2. Equipment protected by flameproof enclosure "d" GB 3836.3-2010 Explosive atmosphere - Part 3. Equipment protected by an increased safety "e" GB 3836.4-2010 Explosive atmosphere - Part 4. Equipment protected by intrinsically safe "i" GB/T 3836.5-2017 Explosive atmosphere - Part 5. Equipment protected by positive pressure enclosure "p" GB 3836.8-2014 Explosive atmospheres - Part 8. Equipment protected by the "n" type GB/T 4831 rotary motor product model preparation method GB/T 4942.1-2006 Classification of the degree of protection (IP code) of the overall structure of a rotating electrical machine GB/T 6113.201-2017 Radio disturbance and immunity measuring equipment and measuring methods - Part 2-1. Radio disturbances And immunity measurement method for conducted disturbance measurement GB/T 6994-2006 Ship electrical equipment definition and general provisions GB/T 9651-2008 Single-phase asynchronous motor test method GB/T 10068-2008 Measurement, evaluation and limitation of mechanical vibration vibration of motors with shaft center height of 56 mm and above Rotating electrical machines - Determination of noise and noise - Part 1 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 7060-2019_English be delivered?Answer: Upon your order, we will start to translate GB/T 7060-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 7060-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 7060-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 7060-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7060-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
