GB/T 6807-2001 PDF EnglishUS$90.00 · In stock · Download in 9 seconds
GB/T 6807-2001: Specifications for phosphating treatment of iron and steel parts before painting Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 6807: Historical versions
GB/T 6807-2001: Specifications for phosphating treatment of iron and steel parts before painting---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT6807-2001GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 25.220.10 A 29 Specifications for phosphating treatment of iron and steel parts before painting Issued on: DECEMBER 17, 2001 Implemented on: JUNE 01, 2002 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Phosphating film classification ... 5 4 Technical requirements ... 5 5 Test method ... 8 6 Acceptance rules ... 8 Appendix A (Normative) Phosphate film appearance inspection rules ... 10 Appendix B (Informative) The conversion relationship between phosphating film thickness and film weight ... 11ForewordThis standard is the revision of GB/T 6807-1986. AND the main technical changes are as follows. - In accordance with the requirements of GB/T 1.1, ADD the foreword, scope, and normative references; - DELETE the “2.8.2, 3.3.2” from the original standard, as well as the corresponding “Appendix D Drop method (Informative)” The Appendix A of this standard is a normative appendix, AND the Appendix B is an informative appendix. This standard shall, from the date of implementation, replace GB/T 6807-1986. This standard was proposed by the China Machinery Industry Federation. This standard shall be under the jurisdiction of the National Metals and Nonmetallic Coatings Standardization Technical Committee. The responsible drafting organization of this standard. Wuhan Institute of Materials Protection. The main drafters of this standard. Li Xinli, Yin Xiongzhi, Li Anzhong, Huo Dongzhi, Wan Jun. This standard was first published on August 28, 1986. NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA Specifications for phosphating treatment of iron and steel parts before painting Replacing GB/T 6807-19861 ScopeThis standard specifies the classification, technical requirements, inspection methods and acceptance rules of the phosphating film of iron and steel parts before painting. This standard is applicable to the phosphating treatment iron and steel parts before painting. The phosphating film as formed after treatment is used as the coating base to enhance the adhesion and corrosion resistance of the coating and the steel matrix, AND to improve the coating quality of the iron and steel parts.2 Normative referencesThe provisions in following documents become the provisions of this Standard through reference in this Standard. The versions indicated at the time of publication of this standard are valid. All standards are subjected to revision, AND parties who reach an agreement based on this Standard are encouraged to study if the latest versions of these documents are applicable. GB/T 1765-1979 Method of producing of paint films for testing heat and humidity resistance, salt-fog resistance and accepted weathering GB/T 1771-1991 Paints and varnishes - Determination of resistance to neutral salt spray GB/T 2828-1987 Sampling procedures for inspection by attributes - Part 1. Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection GB/T 9286-1998 Paints and varnishes - Cross cut test for films (eqv ISO 2409.1992) GB/T 9792-1988 Coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods 4.6 Phosphating film appearance 4.6.1 The color of the workpiece after phosphating shall be light gray to grayish black or colorful; AND the film shall have dense, continuous and uniform crystalline. 4.6.2 If the workpiece after the phosphating has the following conditions or one of them, it is allowed. 4.6.2.1 Slight trace of water, passivation marks, wiping white, or hanging ash; 4.6.2.2 Color and crystalline unevenness due to local heat treatment, welding and surface processing conditions; 4.6.2.3 No phosphating film at the weld. 4.6.3 If the workpiece after the phosphating has the following conditions or one of them, it is not allowed. 4.6.3.1 Loose phosphating film layer; 4.6.3.2 Rust or green spots; 4.6.3.3 Free from phosphating film locally (except weld); 4.6.3.4 Surface serious hanging ash. 4.7 Phosphate film weight The phosphating film weight is determined in accordance with the requirements of GB/T 9792, AND the phosphating film weight shall comply with the value requirements as listed in Table 1. The conversion relationship between the phosphating film thickness and the film weight is as shown in Appendix B (Informative). 4.8 Corrosion resistance of phosphating film FOLLOW the requirements of 5.3 to test the corrosion resistance of the phosphating film, AND after 1 h, the base metal shall not be rusted (except for edge, hole, corner and weld). 4.9 Corrosion resistance of coating film FOLLOW the requirements of 5.4 to test the corrosion resistance of the coating film. The zinc, manganese, and zinc calcium phosphating film coated samples after 24 h neutral salt spray resistance test AND the iron phosphating film coated samples after 8 h neutral salt spray resistance test shall be free from blistering, stripping, or corrosion, except for the scratches. Note. The scratches refer to the range of 0.5 mm width at either side of the scratch. 6.1.2 USE the material same as the workpiece to prepare a 70 mm x 150 mm size sample and MAKE it subjected to treatment simultaneously with the workpiece. 6.2 The appearance inspection is as follows. 6.2.1 Large workpieces and important workpieces shall be 100% inspected and accepted one by one. 6.2.2 General workpieces (including small workpieces) may be sampled, inspected and accepted in accordance with GB/T 2828, AND the inspection rules are as shown in Appendix A (normative). 6.3 In case of determination of the phosphating film weight, if the average value of the 3 parallel samples under the test is disqualified, it shall re-take 3 samples for re-inspection, and if the average value is still disqualified, this batch of products shall be deemed as disqualified. 6.4 In case of corrosion resistance test of the phosphating film, it shall take 3 samples from each batch of workpieces for inspection; if one workpiece is disqualified, it shall double the samples for re-inspection. If there is one disqualified in the re-inspection results, it shall follow the requirements of 6.6 to conduct inspection AND the inspection results shall prevail. 6.5 The spot inspection of the phosphating film weight and coating film corrosion resistance shall be conducted under one of the following conditions. 6.5.1 Newly designed and produced products; 6.5.2 Periodic inspection specified by the enterprise; 6.5.3 Change of equipment, process or bath formulation; 5.5.4 Other inspections as deemed necessary. 6.6 In case of corrosion resistance test of the coating film, it shall take 3 samples from each batch of workpieces for inspection; if one workpiece is disqualified, it shall double the samples for re-inspection. If there is one disqualified in the re-inspection results, this batch of products shall be deemed as disqualified. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 6807-2001 be delivered?Answer: The full copy PDF of English version of GB/T 6807-2001 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 6807-2001_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6807-2001_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 6807-2001 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 6807-2001?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6807-2001 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 6807-2001?A step-by-step guide to download PDF of GB/T 6807-2001_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 6807-2001". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
