GB/T 5959.10-2015 English PDFUS$294.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 5959.10-2015: Safety in electro-heating installations -- Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications Status: Valid
Basic dataStandard ID: GB/T 5959.10-2015 (GB/T5959.10-2015)Description (Translated English): Safety in electro-heating installations -- Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K61 Classification of International Standard: 25.180.10 Word Count Estimation: 15,139 Date of Issue: 2015-12-31 Date of Implementation: 2016-07-01 Quoted Standard: IEC 60519-1-2010; IEC 62395-1; IEC 62395-2 Adopted Standard: IEC 60519-10-2013, IDT Regulation (derived from): State Standard Announcement 2015 No.43 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the safety requirements for industrial and commercial resistive heating systems for the heating of pipes, containers, roofs, concrete slabs and other similar applications. The heat tracing systems to which this standard applies may include factory assembled or field (site) assembled units as well as series and parallel tracing cables, tracing pads or tracing boards that have been assembled and/or terminated in accordance with the manufacturer's instructions. C) geothermal storage; d) hot water insulation; e) thermal insulation of the equipment; b) the insulation of the equipment, including pipes, tanks and containers; c) geothermal storage; ) Surface melting of snow; f) roof and gutter deicing. This standard does not cover applications in potentially explosive atmospheres or does not provide any safety requirements. This standard does not involve a sense GB/T 5959.10-2015: Safety in electro-heating installations -- Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Safety in electroheating installations - Part 10. Particular requirements for electrical resistance trace heating systems for industrial and commercial applications ICS 25.180.10 K61 National Standards of People's Republic of China Part 10 Electric safety devices. industrial and Commercial resistance trace heating systems - Particular requirements Safetyinelectroheatinginstalations-Part 10. Particularrequirementsfor (IEC 60519-10.2013, IDT) Issued on. 2015-12-31 2016-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Heating Equipment Category 3 5 requires 3 Isolation switch 4 and 6 7 is connected to the internal grid connection and 5 Electric shock protection 8 5 9 Equipotential bonding 5 The control circuit 10 and controls 5 Protective Effect of heat 11 6 12 Other hazard protection 6 13 nameplate, marking and technical documentation 6 14 commissioning, inspection, operation and maintenance 6 Reference 9Foreword"Safety of electric devices" has the following 13 sections. --- Part 1. General requirements; --- Part 2. Particular requirements for arc furnace apparatus; --- Part 3. Particular requirements for induction and conduction heating and induction melting apparatus means; --- Part 4. Particular requirements for resistance heating apparatus; --- Part 41. Particular requirements for resistance heating equipment --- glass heating and melting apparatus; --- Part 5. Particular requirements for plasma unit; --- Part 6. Industrial microwave heating equipment safety regulations; --- Part 7. A device having an electron gun of special requirements; --- Part 8. Particular requirements for electroslag remelting furnaces; --- Part 9. Particular requirements for high-frequency dielectric heating apparatus; --- Part 10. Particular requirements for industrial and commercial use resistive heating system; --- Part 11. Particular requirements for liquid metal electromagnetic force device; --- Part 13. Electric apparatus for explosive atmosphere of special requirements. In addition to this series, Part 13 standard, but are used IEC 60519 "Safety of electric devices" each part of the development of corresponding. This section section 10, in conjunction with Part 1. This section drafted in accordance with GB/T 1.1-2009 given rules. This section identical with IEC 60519-10.2013 "Safety in electroheat installations Part 10. The industrial and commercial resistance trace heating system Particular requirements for the system "(second edition, in English). Consistency correspondence between this part of international documents and normative references of our files are as follows. --- GB/T 32348.1-2015 industrial and commercial use - Part 1 resistive heating system. General requirements and test methods (IEC 62395-1.2013, IDT); --- GB/T 32348.2-2015 industrial and commercial resistance trace heating systems - Part 2. system design, installation and maintenance should With a guide (IEC 62395-2.2013, IDT). For ease of use, the IEC 60519-10.2013, this section made the following editorial changes. --- International Standard Annex A reads "This annex is not applicable," it will be deleted. This part is proposed by the China Electrical Equipment Industrial Association. This part of the National Electric Equipment Industry Standardization Technical Committee (SAC/TC121) centralized. This section is drafted. Xi'an Institute Ltd. furnace, electric appliances factory in Wuxi City, famous, Anhui Electric Equipment Co., Ltd. Central Switzerland, BARTEC explosion-proof equipment (Shanghai) Co., Ltd., China Metallurgical Furnace Engineering Technology Center, the State Quality Supervision and Inspection Center Furnace. The main drafters of this section. Yuanfang Lan, Ge Hua, Chou Zhenyu, Ji Cheng Zhi, Wu Jing, Qiu also Hill, Zhu Lin.IntroductionThe purpose of this section is the following, the electrical heating system in normal use, should be safe under the conditions of use of its provisions run. a) the use of reasonable heater structure and meet the test standards IEC 62395-1 specified in detail; b) in the design, installation and maintenance, in accordance with IEC 62395-2 to run on a safe temperature; c) at least IEC 62395-1 and the lowest level of overcurrent and ground fault protection requirements of IEC 62395-2, as well as having a conductive Properties of the metal braid, jacket, or an equivalent conductive material. Part 10 Electric safety devices. industrial and Commercial resistance trace heating systems - Particular requirements1 ScopeGB/T 5959 provisions of this part of the pipeline, container, roof, concrete slabs heating and other similar industrial and commercial applications Safety requirements for resistance trace heating systems. This section applies to the heating system may include a factory-assembled or on-site (site) assembled units, and has been set in accordance with the manufacturer's instructions Loading and/or termination of the series and parallel heating cables, heating pad or heating plate. Typical applications include, but are not limited to. a) pipes, tanks and tank containers, and including fire water system antifreeze; b) insulation equipment, including pipes, tanks and tank containers; c) geothermal storage; d) hot water heat; e) surface of the snow; f) roof and gutter de-icing. This section does not include the application or do not provide any safety requirements in potentially explosive atmosphere. This section does not involve induction, impedance or skin effect heating. Note. The electric heating system of special requirements and testing standards and the design, installation and maintenance requirements, as detailed in IEC 62395-1 and IEC 62395-2. This section provides general safety requirements for the installation of the heating system and a single circuit, operation and maintenance as well as heating system design. These safety precautions related to the protection of people and the environment from harm by the electric and non-electric certain factors, applicable to all types of set Equipment and devices.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. IEC 60519-1.2010 Safety of electric devices - Part 1. General requirements (Safetyinelectroheatinginstalations- Part 1. Generalrequirements) IEC 62395-1 for industrial and commercial resistance trace heating systems - Part 1. General requirements and test methods (Electrical resistancetraceheatingsystemsforindustrialandcommercialapplications-Part 1. Generaland testingrequirements) System design, installation and maintenance Application Guide. IEC 62395-2 industrial and commercial heating systems - Part 2 Resistance trace (Electricalresistancetraceheatingsystemsforindustrialandcommercialapplications-Part 2. Appli- cationguideforsystemdesign, instalationandmaintenance)3 Terms and DefinitionsIEC 60519-1.2010 and defined the following terms and definitions apply to this document. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5959.10-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 5959.10-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 5959.10-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5959.10-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
