GB/T 5801-2020 English PDFUS$389.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 5801-2020: (Rolling bearings, machine-made ring needle roller bearings, overall dimensions, product geometric specifications (GPS) and tolerance values) Status: Valid GB/T 5801: Historical versions
Basic dataStandard ID: GB/T 5801-2020 (GB/T5801-2020)Description (Translated English): (Rolling bearings, machine-made ring needle roller bearings, overall dimensions, product geometric specifications (GPS) and tolerance values) Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J11 Word Count Estimation: 21,271 Date of Issue: 2020-11-19 Date of Implementation: 2021-09-01 Older Standard (superseded by this standard): GB/T 5801-2006 Regulation (derived from): National Standard Announcement No. 26 of 2020 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 5801-2020: (Rolling bearings, machine-made ring needle roller bearings, overall dimensions, product geometric specifications (GPS) and tolerance values)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. (Rolling bearings, machine-made ring needle roller bearings, overall dimensions, product geometric specifications (GPS) and tolerance values) ICS 21.100.20 J11 National Standards of People's Republic of China Replace GB/T 5801-2006 Rolling bearing mechanism ring needle roller bearing outline dimensions, Product geometric technical specifications (GPS) and tolerance values 2020-11-19 released 2021-09-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee Table of contentsPreface Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Symbol 1 5 Nominal external dimensions and chamfer dimensions 4 6 Tolerance 8 6.1 General 8 6.2 Tolerances for complete sets of bearings and bearings without inner ring 8 7 Radial clearance 10 Appendix A (informative appendix) Shaft raceway tolerances of needle roller bearings without inner ring 11 Appendix B (informative appendix) The relationship between the symbols and terms in GB/T 5801-2006 and the description in this document 12 Appendix C (informative appendix) Outer dimensions of special series needle roller bearings 13 Reference 17ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 5801-2006 "Rolling bearing 48, 49 and 69 size series needle roller bearing outline dimensions and tolerances", and Compared with GB/T 5801-2006, the main technical changes are as follows. ---Applied the product geometric technical specification (GPS) system (see Chapter 4); --- Expanded the size range of 49 size series needle roller bearings (see Table 3,.2006 edition of Table 2); ---The size of 59 size series and special series needle roller bearings has been increased (see Table 4, Appendix C); ---Modified the shaft raceway tolerances of needle roller bearings without inner ring (see Appendix A, Appendix A of the.2006 edition) ---The relationship between the symbols and terms in GB/T 5801-2006 and the description in this document has been added (see Appendix B). This standard uses the redrafting method to modify and adopt ISO 1206.2018 ``Rolling bearing mechanism ring needle roller bearing outline dimensions, product Geometric Technical Specifications (GPS) and tolerance values. The technical differences between this standard and ISO 1206.2018 and the reasons are as follows. --- Regarding normative reference documents, this standard has made adjustments with technical differences to adapt to my country's technical conditions and adjustments. The situation is collectively reflected in Chapter 2 "Normative Reference Documents", and the specific adjustments are as follows. ● Replace ISO 1101 with GB/T 1182 which is modified to adopt international standards (see Chapter 3); ● Replace ISO 5593 with GB/T 6930 equivalent to the international standard (see Chapter 3); ● Added reference to GB/T 273.3 (see Chapter 5); ● Added reference to GB/T 274 (see Chapter 5); ● Added reference to GB/T 4604.1 (see Chapter 7); ● Added reference to GB/T 7811-2015 (see Table 1). --- The dimensions of the special series of needle roller bearings are regarded as an informative appendix. The output of special series needle roller bearings is small, and the model is easy to be compared with other series. Row needle roller bearings are confused, so as an appendix it is only for user reference. ---In Table 2~Table 5 and Table C.1, C.2 has increased the bearing model to facilitate user selection. This standard was proposed by China Machinery Industry Federation. This standard is under the jurisdiction of the National Standardization Technical Committee for Rolling Bearings (SAC/TC98). Drafting organizations of this standard. Luoyang Bearing Research Institute Co., Ltd., Schaeffler (China) Co., Ltd., Suzhou Bearing Factory Co., Ltd., Xiang Yang Auto Bearing Co., Ltd., Zhejiang Dewo Bearing Co., Ltd. The main drafters of this standard. Zhang Bowen, Wen Chaojie, Li Yiwen, Zhou Caihong, Yan Weiguo, Jiang Zhentianyu, Wang Huijuan, Wang Yuliang. The previous versions of the standard replaced by this standard are as follows. ---GB 5801-1986, GB/T 5801-1994, GB/T 5801-2006.IntroductionThis standard is the geometric elements of mechanical parts specified in the product geometric technical specification (GPS) system (see ISO 14638 matrix model) standard. Unless otherwise specified, the basic principles of ISO /GPS given in ISO 8015 apply to this standard, and the deficiencies given in ISO 14253-1 The provincial principle applies to technical specifications formulated in accordance with this standard. It is recommended to consider the relationship between functional requirements, measurement methods and measurement uncertainty. Suggested attention to measurement uncertainty ISO 14253-2. Rolling bearing mechanism ring needle roller bearing outline dimensions, Product geometric technical specifications (GPS) and tolerance values1 ScopeThis standard specifies the outer dimensions and general tolerance values of needle roller bearings with machined rings (hereinafter referred to as bearings). This standard specifies the size and geometric characteristics of the bearing and the limit deviation from the nominal size. This standard applies to complete sets of needle roller bearings and needle roller bearings without inner ring. Refer to Appendix A for the recommended values of shaft raceway tolerances for needle roller bearings without inner ring.2 Normative referencesThe following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 273.3 Rolling bearing overall dimension plan Part 3.Radial bearings (GB/T 273.3-2020, ISO 15. 2017, IDT) GB/T 274 Maximum chamfer size of rolling bearing GB/T 1182 Product Geometric Technical Specification (GPS) Geometric tolerance shape, direction, position and run-out tolerance mark GB/T 4604.1 Rolling bearing clearance Part 1.Radial clearance of radial bearing GB/T 6930 Rolling Bearing Vocabulary (GB/T 6930-2002, ISO 5593.1997, IDT) GB/T 7811-2015 rolling bearing parameter symbol (ISO 15241.2012, IDT) ISO 14405-1 Geometric Technical Specifications for Products (GPS) Dimensional Tolerance Part 1.Linear Dimensions ISO /T S17863 Product Geometric Technical Specification (GPS) Tolerance standard for movable components3 Terms and definitionsThe terms and definitions defined in GB/T 1182, GB/T 6930, ISO 14405-1 and ISO /T S17863 apply to this document. The website of the term database used in the standardization work maintained by ISO and IEC is as follows.4 symbolsThe description of symbols is consistent with GPS terminology; the relationship with traditional terminology is shown in Table B.1 of Appendix B. The symbols given in Table 1 apply to this file. The tolerance value related to the characteristic is expressed by t plus the characteristic symbol, such as tΔCs. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5801-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 5801-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 5801-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5801-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 5801-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5801-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
