GB/T 5796.4-2022 English PDF

US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5796.4-2022: Trapezoidal screw threads - Part 4: Tolerances
Status: Valid

GB/T 5796.4: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 5796.4-2022	359	Add to Cart	4 days	Trapezoidal screw threads - Part 4: Tolerances	Valid
GB/T 5796.4-2005	639	Add to Cart	3 days	Trapezoidal screw threads -- Part 4: Tolerances	Obsolete
GB/T 5796.4-1986	599	Add to Cart	4 days	Metric trapezoidal screw threads--Tolerances	Obsolete

Similar standards

GB/T 5796.1   GB/T 5796.2   GB/T 5097   GB/T 9239.2   GB/T 9144   GB/T 5796.3   

Basic data

Standard ID: GB/T 5796.4-2022 (GB/T5796.4-2022)
Description (Translated English): Trapezoidal screw threads - Part 4: Tolerances
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J04
Word Count Estimation: 18,123
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 5796.4-2022: Trapezoidal screw threads - Part 4: Tolerances

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Trapezoidal screw threads - Part 4.Tolerances ICS 21.040.10 CCSJ04 National Standards of People's Republic of China Replacing GB/T 5796.4-2005 Trapezoidal threads part 4.tolerances Published on 2022-03-09 2022-10-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is part 4 of GB/T 5796 "Trapezoidal Thread". GB/T 5796 has released the following parts. --- Part 1.Tooth type; --- Part 2.Diameter and pitch series; --- Part 3.Basic dimensions; --- Part 4.Tolerances. This document replaces GB/T 5796.4-2005 "Trapezoidal Threads - Part 4.Tolerances". Compared with GB/T 5796.4-2005, except for the In addition to structural adjustments and editorial changes, the main technical changes are as follows. ---Increased the code of the nominal diameter of the internal thread; changed the code of the thread lead (see Chapter 4; 3.2 of the.2005 edition); --- Changed the position of the left-hand thread code in the thread mark; deleted the parentheses of the thread pitch in the multi-line thread mark (see Chapter 12, Chapter 8 of the.2005 edition). This document is modified to adopt ISO 2903.2016 "ISO Metric Trapezoidal Thread Tolerances". The technical differences between this document and ISO 2903.2016 and their reasons are as follows. --- Change ISO 5408 from informative reference to normative reference and replace it with GB/T 14791 (see Chapter 3) to make it conform to the national standard. home standards writing requirements; --- Change the normative references ISO 965-1, ISO 2901 and ISO 2902 to informative references, and use GB/T 197, GB/T 5796.1 and GB/T 5796.2 are replaced to make it meet the requirements of national standard preparation; ---Increase the code of the medium screw length (see Chapter 4), which is convenient for users to understand the screw length formula; --- Change the prompts in Table 1, Table 2, Table 3, Table 4, Table 5, Table 6 and Table 7 from declarative clauses to requirement-type clauses (see Chapters 6 to 8 Chapter), clarify the required attributes of these seven tables; --- Change the "basic major diameter" in the headers of Table 4, Table 5, Table 6 and Table 7 to "nominal diameter", and give the exact value of the code (D and d). name. The following editorial changes have been made to this document. --- Change the file name to "Trapezoidal Thread Part 4.Tolerances"; --- Change the nominal diameter code "d" in formula (12), formula (13) and formula (14) to "D", and the internal thread diameter code is capitalized letter. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed and managed by the National Thread Standardization Technical Committee (SAC/TC108). This document is drafted by. Ningbo Ningli High Strength Fastener Co., Ltd., China Machinery Productivity Promotion Center, Hebei Jianzhi Foundry Group Co., Ltd. Company, Wenling Screw Steel Machinery Co., Ltd. The main drafters of this document. Xu Yong, Li Xiaobin, Li Xiaoqin, Ai Chenguang, Qiu Cheng, Lin Lihua. This document was first published in 1965, revised for the first time in 1986, and revised for the second time in.2005, this time being the third revision.

Introduction

GB/T 5796 "Trapezoid Thread" consists of 4 parts. --- Part 1.Tooth shape. It establishes the basic dimension formula of thread diameter for part 3 and part 4 and determines the start of thread tolerance zone Location provides the technical foundation. --- Part 2.Diameter and pitch series. It establishes the basic dimension table of thread diameter and determines the thread diameter for part 3 and part 4 The difference table provides a specification basis for nominal diameter and pitch. --- Part 3.Basic dimensions. It provides a technical basis for determining the limit size of the thread diameter. --- Part 4.Tolerances. It provides technical basis for product production and inspection. The four parts of tooth type, diameter and pitch series, basic dimensions and tolerances constitute the complete technical parameter system of "Trapezoid Thread". put them together It is convenient for users to find and use within a standard. Trapezoidal threads part 4.tolerances

1 Scope

This document specifies the tolerances and markings of trapezoidal threads. The diameter and pitch combination series conform to the provisions of GB/T 5796.2. Compared with the design tooth shape specified in GB/T 5796.1. This document applies primarily to general-purpose mechanical transmission threads, and may also be used for fastening threads. The tolerance system specified in this document is not suitable Used for trapezoidal threads that require high precision in axial displacement, such as machine tool screws and precision feed threaded workpieces.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 14791 Thread Terminology (GB/T 14791-2013, ISO 5408.2009, IDT)

3 Terms and Definitions

Terms and definitions defined in GB/T 14791 apply to this document.

4 code

The following codes apply to this document. D4.Basic major diameter of internal thread; D. Nominal diameter of internal thread; D2.Basic pitch diameter of internal thread; D1.Basic minor diameter of internal thread; d. basic major diameter of external thread (nominal diameter); d2.basic pitch diameter of external thread; d3.basic diameter of external thread; P. pitch; Ph.lead; N. medium twist length group; L. long twist length group; lN. medium screwing length; T. tolerance; TD2, TD1, Td, Td2, Td3.respectively the inner thread pitch diameter, minor diameter tolerance and the outer thread major diameter, middle diameter, minor diameter tolerance; EI, ei. lower deviation; ES, es. upper deviation. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5796.4-2022_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5796.4-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5796.4-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5796.4-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 5796.4-2022?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5796.4-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.