GB/T 5647-2008 English PDFUS$149.00 ยท In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 5647-2008: Flared couplings -- Style A nut Status: Valid GB/T 5647: Historical versions
Basic dataStandard ID: GB/T 5647-2008 (GB/T5647-2008)Description (Translated English): Flared couplings -- Style A nut Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J15 Classification of International Standard: 21.060.60 Word Count Estimation: 5,512 Date of Issue: 2008-05-07 Date of Implementation: 2008-11-01 Older Standard (superseded by this standard): GB/T 5647-1985 Quoted Standard: GB/T 5653-2008 Regulation (derived from): National Standard Approval Announcement 2008 No.7 (Total No.120) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the flare tube fittings A nut size and technical requirements. This standard applies to pipe outside diameter 4mm ~ 34mm, the maximum working pressure of the hydraulic fluid transmission 3. 5MPa ~ 16MPa and general -purpose pipeline system. GB/T 5647-2008: Flared couplings -- Style A nut---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Flared couplings. Style A nut ICS 21.060.60 J15 National Standards of People's Republic of China Replacing GB/T 5647-1985 Flared type tube fittings A nut Posted 2008-05-07 2008-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard is one flared fittings series. This standard is GB/T 5647-1985 "A flared type tube fittings" amendments. The main amendments are. --- Modified Chinese and English name; --- Reducing the parameters should be part of the manufacturer's control; --- Tolerance on the part of prevailing standards of tolerance and fit adjustment; --- Cancel the marked surface roughness, roughness conditions are given in the technical standards. Since the implementation of this standard replaces GB/T 5647-1985. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee pipe accessories. This standard is drafted by. Productivity Promotion Center in the machine, high-Bo Haiyan Pipe Fittings Co., Ltd. Participated in the drafting of this standard. Haiyan Pipe Manufacturing Co., Eaton (Ningbo) fluid connector Ltd., Jiaxing Mai Site fittings Manufacturing Co., Ltd., Jianhu particularly good hydraulic pipe fittings Co., Ltd., Haiyan tube Manufacturing Co., Ltd., Jiaozuo City, has lead to the hydraulic attachment Limited. The main drafters of this standard. Li Weirong, Gengzhi science, Ruanhao Feng, Zhou Shunhua, Tao Zhongming, Zuo Jun, Zhou Jianfei, Wang Limin, Feng Feng. This standard replaces the standards previously issued as follows. --- GB/T 5647-1985. Flared type tube fittings A nut1 ScopeThis standard specifies the flare tube fittings A nut size and technical requirements. This standard applies to pipe outside diameter 4mm ~ 34mm, the maximum working pressure of the hydraulic fluid and transmission of a 3.5MPa ~ 16MPa General purpose piping system.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 5653-2008 flared tube fittings3 DimensionsFlared type tube fittings A nut dimensions shall comply with the provisions of Figure 1 and Table 1.4 Mark4.1 labeling method Flared type tube fittings nut A mark shall comply with the provisions of GB/T 5653's. 4.2 tag example Tube outer diameter of 10mm, zinc coated steel flared fittings marked with A nut. Nut GB/T 5647 A105 Technical requirementsTechnical requirements according to GB/T 5653 regulations. ...... |
