GB/T 5645-2008 English PDFUS$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 5645-2008: Flared couplings -- Connector for pressure gauge Status: Valid GB/T 5645: Historical versions
Basic dataStandard ID: GB/T 5645-2008 (GB/T5645-2008)Description (Translated English): Flared couplings -- Connector for pressure gauge Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J15 Classification of International Standard: 21.060.60 Word Count Estimation: 5,511 Date of Issue: 2008-05-07 Date of Implementation: 2008-11-01 Older Standard (superseded by this standard): GB/T 5645.1-1985; GB/T 5645.2-1985 Quoted Standard: GB/T 5646-2008; GB/T 5647-2008; GB/T 5648-2008; GB/T 5652-2008; GB/T 5653-2008; JB/T 1002-1977 Regulation (derived from): National Standard Approval Announcement 2008 No.7 (Total No.120) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the size of the flare tube fittings and connector body, marking and technical requirements. This standard applies to the pipe diameter of 6mm ~ 44mm, the maximum working pressure of the hydraulic fluid transmission 3. 5MPa ~ 16MPa and general -purpose pipeline system. GB/T 5645-2008: Flared couplings -- Connector for pressure gauge---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Flared couplings. Connector for pressure gauge ICS 21.060.60 J15 National Standards of People's Republic of China Replacing GB/T 5645.1-1985, GB/T 5645.2-1985 Flared gauge fittings Posted 2008-05-07 2008-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard is one flared fittings series. This standard is GB/T 5645.1-1985 "flared fittings gauge" and GB/T 5645.2-1985 "flared tube gauge Joint body "amendments. The main amendments are. --- The two standard content integration; --- Modify the English name; --- Increased 55 ° unsealed pipe thread (G); --- Reducing the parameters should be part of the manufacturer's control; --- Tolerance on the part of prevailing standards of tolerance and fit adjustment; --- Cancel the marked surface roughness, surface roughness is given in GB/T 5653 "flared fittings technical conditions" in. Since the implementation of this standard replaces GB/T 5645.1-1985, GB/T 5645.2-1985. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee pipe accessories. This standard is drafted by. Jianhu good special hydraulic pipe fittings Co., Ltd., machine Productivity Promotion Center. Participated in the drafting of this standard. Haiyan Pipe Manufacturing Co., Eaton (Ningbo) fluid connector Ltd., Jiaxing Mai Site fittings Manufacturing Co., Ltd., a high-Bo Haiyan Pipe Co., Ltd., Haiyan tube Manufacturing Co., Ltd. Jiaozuo City roads lead to hydraulic attachments. The main drafters of this standard. Gengzhi school, Li Weirong, Zhou Shunhua, Li Junying, Zuo Jun, Tao Zhongming, Ruanhao Feng, Zhou Jianfei, Wang Limin, Feng Feng. This standard replaces the standards previously issued as follows. --- GB/T 5645.1-1985, GB/T 5645.2-1985. Flared gauge fittings1 ScopeThis standard specifies the dimensions, marking and technical requirements flared gauge fittings and joints of the body. This standard applies to the pipe diameter of 6mm ~ 14mm, the maximum working pressure of the hydraulic fluid transmission 3.5MPa ~ 16MPa and a General purpose piping system.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 5646-2008 flared pipe joint socket GB/T 5647-2008 flared tube fittings A nut GB/T 5648-2008 flared tube fittings B nuts GB/T 5652-2008 flared flared end fittings Dimensions GB/T 5653-2008 flared tube fittings JB/T 1002-1977 sealing gasket3 DimensionsFlared gauge fittings and joints shall conform to the dimensions of the body 1, the provisions of Figure 2 and Table 1, the connector body size should be consistent with the flared end GB/T 5652 regulations.4 Mark4.1 labeling method Flared tube gauge connector body joints and labeling methods should be consistent with GB/T 3761's. 4.2 tag example Flared type A, the pipe diameter of 10mm, steel flared fittings gauge galvanized surface markers as follows. Fittings GB/T 5645 A10 Flared type A, the pipe diameter of 10mm, steel flared fittings gauge galvanized surface marked. Joint body GB/T 5645 A105 Technical requirementsTechnical requirements according to GB/T 5653 regulations. ...... |
