GB/T 5632-2008 English PDF

US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5632-2008: Flared couplings -- Swivel elbow
Status: Valid

GB/T 5632: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 5632-2008	169	Add to Cart	3 days	Flared couplings -- Swivel elbow	Valid
GB/T 5632.1-1985	199	Add to Cart	2 days	Flared type tube fittings--Swivel elbow--Assembly	Obsolete

Similar standards

GB/T 9125.1   GB/T 9125.2   GB/T 4622.1   GB/T 5626   GB/T 5627   GB/T 5625   

Basic data

Standard ID: GB/T 5632-2008 (GB/T5632-2008)
Description (Translated English): Flared couplings -- Swivel elbow
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J15
Classification of International Standard: 21.060.60
Word Count Estimation: 7,72
Date of Issue: 2008-05-07
Date of Implementation: 2008-11-01
Older Standard (superseded by this standard): GB/T 5632.1-1985; GB/T 5632.2-1985
Quoted Standard: GB/T 5646-2008; GB/T 5647-2008; GB/T 5648-2008; GB/T 5652-2008; GB/T 5653-2008
Regulation (derived from): National Standard Approval Announcement 2008 No.7 (Total No.120)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the combinations of elbow flared pipe fittings and joints body size, marking and technical requirements. This standard applies to pipe outside diameter 4mm ~ 34mm, the maximum working pressure of the hydraulic fluid transmission 3. 5MPa ~ 16MPa and general -purpose pipeline system.

GB/T 5632-2008: Flared couplings -- Swivel elbow

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Flared couplings. Swivel elbow ICS 21.060.60 J15 National Standards of People's Republic of China Replacing GB/T 5632.1-1985, GB/T 5632.2-1985 Flared combination elbow fittings Posted 2008-05-07 2008-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is one flared fittings series. This standard is GB/T 5632.1-1985 "flared combination right angle fittings" and GB/T 5632.2-1985 "flared combination straight Amendment corner fittings Style ". The main amendments are. --- The two standard content integration; --- Modified Chinese and English name; --- Increasing the hexagonal structure of the blank; --- Reducing the parameters should be part of the manufacturer's control; --- Tolerance on the part of prevailing standards of tolerance and fit adjustment; --- Cancel the marked surface roughness, surface roughness is given in GB/T 5653 "flared fittings technical conditions" in. Since the implementation of this standard replaces GB/T 5632.1-1985, GB/T 5632.2-1985. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee pipe accessories. This standard is drafted by. The machine Productivity Promotion Center, Haiyan Pipe Manufacturing Co., Ltd. Haiyan high Bo tube. Participated in the drafting of this standard. Eaton (Ningbo) fluid connector Ltd., Jiaxing Mai Site Pipe Manufacturing Co., Ltd., Jianhu special Jia Hydraulic Fittings Co., Ltd., Haiyan tube Manufacturing Co., Ltd. Jiaozuo City roads lead to hydraulic attachments. The main drafters of this standard. Gengzhi school, Li Weirong, Zhou Shunhua, Ruanhao Feng, Zuo Jun, Tao Zhongming, Zhou Jianfei, Wang Limin, Feng Feng. This standard replaces the standards previously issued as follows. --- GB/T 5632.1-1985, GB/T 5632.2-1985. Flared combination elbow fittings

1 Scope

This standard specifies the composition elbow flared tube dimensions, marking and technical requirements of the joint and the joint body. This standard applies to pipe outside diameter 4mm ~ 34mm, the maximum working pressure of the hydraulic fluid and transmission of a 3.5MPa ~ 16MPa General purpose piping system.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 5646-2008 flared pipe joint socket GB/T 5647-2008 flared tube fittings A nut GB/T 5648-2008 flared tube fittings B nuts GB/T 5652-2008 flared flared end fittings Dimensions GB/T 5653-2008 flared tube fittings

3 Dimensions

Flared combination elbow fittings and connector body dimensions shall comply with Figs. 1 to 4 and Table 1, the connector body size should meet the flared end Co GB/T 5652 regulations.

4 Mark

4.1 labeling method Labeling method of joints and the joint body composition elbow flared tube should be consistent with GB/T 5653 regulations. 4.2 tag example Flared type A, the pipe diameter of 10mm, steel flared surface galvanized combination of elbow fittings marked. Fittings GB/T 5632 A10 Flared type A, the pipe diameter of 10mm, steel flared combination of elbow joint surface galvanized marked. Joint body GB/T 5632 A10

5 Technical requirements

Technical requirements according to GB/T 5653 regulations. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5632-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5632-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5632-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5632-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 5632-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5632-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.