GB/T 5626-2008 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5626-2008: Flared couplings -- Male
Status: Valid

GB/T 5626: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 5626-2008	139	Add to Cart	3 days	Flared couplings -- Male	Valid
GB/T 5626.1-1985	199	Add to Cart	2 days	Flared type tube fittings--Male connector--Assembly	Obsolete

Similar standards

GB/T 9125.1   GB/T 9125.2   GB/T 4622.1   GB/T 5627   GB/T 5628   GB/T 5625   

Basic data

Standard ID: GB/T 5626-2008 (GB/T5626-2008)
Description (Translated English): Flared couplings -- Male
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J15
Classification of International Standard: 21.060.60
Word Count Estimation: 6,619
Date of Issue: 2008-05-07
Date of Implementation: 2008-11-01
Older Standard (superseded by this standard): GB/T 5626.1-1985; GB/T 5626.2-1985
Quoted Standard: GB/T 5646-2008; GB/T 5647-2008; GB/T 5648-2008; GB/T 5652-2008; GB/T 5653-2008
Regulation (derived from): National Standard Approval Announcement 2008 No.7 (Total No.120)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the flared cone straight pipe thread size fittings and connector body, marking and technical requirements. This standard applies to pipe outside diameter 4mm ~ 34mm, the maximum working pressure of the hydraulic fluid transmission 3. 5MPa ~ 16MPa and general -purpose pipeline system.

GB/T 5626-2008: Flared couplings -- Male

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Flared couplings. Male ICS 21.060.60 J15 National Standards of People's Republic of China Replacing GB/T 5626.1-1985, GB/T 5626.2-1985 Flared type thread straight couplings Posted 2008-05-07 2008-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is one flared fittings series. This standard is GB/T 5626.1-1985 "flared taper thread straight couplings" and GB/T 5626.2-1985 "flared cone snail Straight pattern fitting body "amendments. The main amendments are as follows. --- The two standard content integration; --- Modify the English name; --- Threaded end of the column increases the 55 ° sealing pipe thread (R) and 60 ° sealing pipe thread (NPT), to cancel the original standard metric taper thread (ZM); --- Reducing the parameters should be part of the manufacturer's control; --- Tolerance on the part of prevailing standards of tolerance and fit adjustment; --- Cancel the marked surface roughness, surface roughness is given in GB/T 5653 "flared fittings technical conditions" in. Since the implementation of this standard replaces GB/T 5626.1-1985, GB/T 5626.2-1985. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee pipe accessories. This standard is drafted by. The machine Productivity Promotion Center, Haiyan Pipe Manufacturing Co., Eaton (Ningbo) Co., fluid connector the company. Participated in the drafting of this standard. Jiaxing Mai Site Pipe Manufacturing Co., Ltd., Jianhu particularly good hydraulic pipe fittings Co., Bo Gao Haiyan tube Ltd., Haiyan tube Manufacturing Co., Ltd. Jiaozuo City roads lead to hydraulic attachments. The main drafters of this standard. Gengzhi school, Li Weirong, Zhou Shunhua, Li Junying, Tao Zhongming, Zuo Jun, Ruanhao Feng, Zhou Jianfei, Wang Limin. This standard replaces the standards previously issued as follows. --- GB/T 5626.1-1985, GB/T 5626.2-1985. Flared type thread straight couplings

1 Scope

This standard specifies the flared straight taper thread pipe dimensions, marking and technical requirements of the joint and the joint body. This standard applies to pipe outside diameter 4mm ~ 34mm, the maximum working pressure of the hydraulic fluid and transmission of a 3.5MPa ~ 16MPa General purpose piping system.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 5646-2008 flared pipe joint socket GB/T 5647-2008 flared tube fittings A nut GB/T 5648-2008 flared tube fittings B nuts GB/T 5652-2008 flared flared end fittings Dimensions GB/T 5653-2008 flared tube fittings

3 Dimensions

Flared type thread straight couplings and fittings shall conform to the dimensions of the body 1, the provisions of Figure 2 and Table 1, the connector body size should meet the flared end Co GB/T 5652 regulations.

4 Mark

4.1 labeling method Labeling method of joints and the joint body flared taper thread straight pipe should be consistent with GB/T 5653 regulations. 4.2 tag example Flared type A, the pipe diameter of 10mm, 55 ° sealing pipe thread (R), steel flared tapered threaded surface of galvanized pipe joint Straight Head marked. Fittings GB/T 5626 A10/R1/4 Flared type A, the pipe diameter of 10mm, steel flared through connector 55 ° taper thread sealing pipe thread (R), galvanized surface treated Body mark. Joint body GB/T 5626 A10/R1/4

5 Technical requirements

Technical requirements according to GB/T 5653 regulations. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5626-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5626-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5626-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5626-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 5626-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5626-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.