GB/T 5623-2008 English PDFUS$169.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 5623-2008: Guide for the electricity consumption quota determination and regulation of product Status: Valid GB/T 5623: Historical versions
Basic dataStandard ID: GB/T 5623-2008 (GB/T5623-2008)Description (Translated English): Guide for the electricity consumption quota determination and regulation of product Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: F01 Classification of International Standard: 27.010 Word Count Estimation: 7,796 Date of Issue: 2008-09-18 Date of Implementation: 2009-05-01 Older Standard (superseded by this standard): GB/T 5623-1985 Quoted Standard: GB/T 12723 Regulation (derived from): Announcement of Newly Approved National Standards No. 16 of 2008 (No. 129 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the product power consumption quota (hereinafter referred to as fixed) to develop the basic requirements, power consumption calculation, yield calculation, quota setting and quota management. This standard applies to the use of energy in production, and have styling products or fixed workload power units, also applies to power irrigation agriculture, agricultural processing and production of electricity. GB/T 5623-2008: Guide for the electricity consumption quota determination and regulation of product---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Guide for the electricity consumption quota determination and regulation of product ICS 27.010 F01 National Standards of People's Republic of China Replacing GB/T 5623-1985 Power consumption quota product development and management guidelines Posted 2008-09-18 2009-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 5623-1985 "Product development and management of power consumption quota guidelines." The main changes compared to 5623-1985 standard and GB/T as follows. --- Partial modification of the original standard introduction of standards-based content and scope; --- The standard adds references GB/T 12723; --- Original standard in Chapter 2 and Chapter 3 content classification purposes, modify the basic requirements of this standard; --- Explain the original standard 6.2.1 mathematical statistics, measurement method 6.2.2, 6.2.3 calculation method, three methods to Appendix; --- Original standard 7.7 deleted. This standard Annex A, Annex B normative appendix. This standard by the National Standardization Technical Committee for Energy and management proposed. This standard by the National Standardization Technical Committee for Energy Management and rational use of electricity at the Technical Committee. This standard was drafted. Beijing Tiancheng is the measurement and control technology Co., Ltd., Beijing Energy Saving and Environmental Protection Center, China National Institute of Standardization, Tsinghua University Science, Beijing Electric Power Company. The main drafters of this standard. Shirong, Dike Jun, Tao Yi, Cheng Jianhong, Mengzhao Li. This standard was first published in 1985. Power consumption quota product development and management guidelines1 ScopeThis standard specifies the basic requirements for the product power consumption quotas (hereinafter referred to as quotas) to develop, electricity consumption calculation, production calculation, quota and develop Quota management. This standard applies to the use of energy in production, and a styling product or a fixed workload power units, but also for agriculture power row Irrigation, agricultural processing and other production of electricity.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 12723 energy consumption per unit of product preparation General3 Terms and DefinitionsThe following terms and definitions apply to this standard. 3.1 Under the given conditions, the production unit or product unit completed the workload standard value of power consumption.4 Basic requirementsQuota of 4.1 shall comply with the requirements of GB/T 12723 of. 4.2 units of electricity per unit of product produced in accordance with fixed assessment or complete unit workload electricity technology. Quota is to assess the efficiency of energy use A comprehensive technical and economic indicators of the rate and level of power management. 4.3 integrated into the fixed quotas and quotas for individual categories. 4.3.1 Comprehensive Norm divided into full-scale integrated plant (whole plant scale) integrated fixed and workshop (workshop quotas). 4.3.2 Individual quotas into quotas and process technology quotas.5 calculates the power consumption5.1 Calculation of integrated fixed electricity production is to determine the direct and indirect production of electricity consumed within the scope of the sum. Calculation of individual quotas Direct production of electricity is to determine the range of the amount of electricity. Individual quotas are comparable, including its scope should be based on electricity production Process to determine the calculated range unified regulations by the competent authority. 5.2 direct production of electricity is a product (or semi-finished products) consumed in the production of physical and chemical processes in power, as well as in the production process, The direct loss of power equipment, such as mechanical, thermal, electromagnetic, chemical and other losses caused by electricity. 5.3 Indirect electricity production is directly related to the production process of other electricity consumption, including. a) repair, tools, preparation, transportation, testing and other auxiliary production sector electricity consumption; b) water, gas, gas, heating, cooling and other electricity consumption; c) the maintenance of production equipment, accident repair and maintenance after commissioning of electricity; d) electricity production safety; e) waste treatment and electricity consumption; ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5623-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 5623-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 5623-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5623-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 5623-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5623-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
