GB/T 2587-2009 English PDFUS$169.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 2587-2009: General principles for energy balance of equipment using energy Status: Valid GB/T 2587: Historical versions
Basic dataStandard ID: GB/T 2587-2009 (GB/T2587-2009)Description (Translated English): General principles for energy balance of equipment using energy Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: F01 Classification of International Standard: 27.010 Word Count Estimation: 7,715 Date of Issue: 2009-04-08 Date of Implementation: 2009-12-01 Older Standard (superseded by this standard): GB/T 2587-1981 Regulation (derived from): Announcement of Newly Approved National Standards No. 4, 2009 (No. 144 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the energy balance model of energy-using equipment, energy balance calculation basis, energy balance test requirements, the contents of the energy balance and energy balance calculation results indicate. This standard applies to the use of fuel, electricity and heating and other energy equipment. GB/T 2587-2009: General principles for energy balance of equipment using energy---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.General principles for energy balance of equipment using energy ICS 27.010 F01 National Standards of People's Republic of China Replacing GB/T 2587-1981 General energy balance using equipment Posted 2009-04-08 2009-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 2587-1981 "General Thermal Energy Balance." This standard compared with GB/T 2587-1981, the main changes are as follows. --- Standard name changed to "General energy Energy Balance"; --- Delete the original terms and definitions, adding the term "energy-using equipment energy balance"; --- Details given item category input energy and output energy contained; --- Clear energy-using equipment, energy balance calculations by secondary energy equivalent value calculation; --- Provision of energy units of measurement used in the energy balance of the characteristics of the system can also be used kWh kilograms of standard coal; --- Gives a more practical energy balance sheet, increasing the content of the report of the energy balance; --- Delete the original normative (standard explanation). This standard by the National Standardization Technical Committee for Energy and management proposed. This standard by the National Standardization Technical Committee for Energy and Management. This standard was drafted. Ministry of Information Industry Energy Conservation Monitoring Center, China National Institute of Standardization, the National Energy Conservation Monitoring and Management Center in West China Economic Development Research Center, the National Development and Reform Commission, Energy Research Institute. The main drafters of this standard. Hairuo Yan Chen Hai Hung, Yang Chang Jian, Li Ai Xian, Liu Zhijie, Zhang tube birth, Xinding Guo, Hu Xiulian, Zhang. This standard replaces the standards previously issued as follows. --- GB/T 2587-1981. General energy balance using equipment1 ScopeThis standard specifies the reference energy balance model energy-using equipment, energy balance calculation, the energy balance test requirements, energy balance calculation Representing the contents and results of the energy balance. This standard applies to the use of fuel, electricity and heat, and other energy equipment.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. Quantities and units of thermal GB 3102.43 Terms and DefinitionsThe following terms and definitions apply to this standard. 3.1 Energy input and output devices on the energy balance between the number of inspected for quantitative analysis of energy use.4 energy balance model using equipment4.1 Energy balance block diagram using equipment Energy-using equipment energy balance diagram shown in Figure 1. Balanced block diagram using equipment Energy 4.2 using equipment energy balance equation Energy-using equipment energy balance equation by the formula (1). Er = Ecy + Ecs (1) Where. Er --- energy into the energy-using equipment; Ecy --- effective energy utilization; Ecs --- energy loss. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 2587-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 2587-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 2587-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2587-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 2587-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2587-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
