GB/T 5584.3-2009 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5584.3-2009: Rectangular copper or aluminium and its alloy wires for electrical purposes -- Part 3: Aluminium rectangular wire
Status: Valid

GB/T 5584.3: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 5584.3-2009	139	Add to Cart	3 days	Rectangular copper or aluminium and its alloy wires for electrical purposes -- Part 3: Aluminium rectangular wire	Valid
GB/T 5584.3-1985	199	Add to Cart	2 days	Rectangular copper or aluminium and its alloy conductors for electrical purposes--Part 3: Aluminium rectangular conductor	Obsolete

Similar standards

GB/T 4910   GB/T 5585.2   GB/T 5585.1   GB/T 3428   GB/T 5584.4   GB/T 5584.1   

Basic data

Standard ID: GB/T 5584.3-2009 (GB/T5584.3-2009)
Description (Translated English): Rectangular copper or aluminium and its alloy wires for electrical purposes -- Part 3: Aluminium rectangular wire
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K11
Classification of International Standard: 29.060.10
Word Count Estimation: 6,628
Date of Issue: 2009-03-19
Date of Implementation: 2009-12-01
Older Standard (superseded by this standard): GB/T 5584.3-1985
Quoted Standard: GB/T 3048.2-2007; GB/T 4909.2-2009; GB/T 4909.3-2009; GB/T 4909.6-2009; GB/T 5584.1-2009
Regulation (derived from): Announcement of Newly Approved National Standards No. 3, 2009 (No. 143 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the electrical aluminum flat wire models, specifications, technical requirements, test, delivery requirements. This section applies to electrical aluminum flat wire. This part should GB/T 5584. 1-2009 together.

GB/T 5584.3-2009: Rectangular copper or aluminium and its alloy wires for electrical purposes -- Part 3: Aluminium rectangular wire

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rectangular copper or aluminium and its alloy wires for electrical purposes.Part 3. Aluminium rectanglar wire ICS 29.060.10 K11 National Standards of People's Republic of China Replacing GB/T 5584.3-1985 Electrician with copper, aluminum and its alloys flat wire Part 3. Aluminium flat wire Posted 2009-03-19 2009-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 5584 "electrician with copper, aluminum and its alloys flat wire" is divided into four parts. --- Part 1. General requirements; --- Part 2. copper flat wire; --- Part 3. Aluminium flat wire; --- Part 4. Copperbelt. This part of GB/T 5584 Part 3. This Part replaces GB/T 5584.3-1985 "electrician with copper, aluminum and its alloys flat wire - Part 3. Aluminium flat line." This portion of the GB/T 5584.3-1985 main changes are as follows. --- Adjustment for aluminum flat wire technical requirements (1985 Version 5.1; 6.1 edition). This part is proposed by the China Electrical Equipment Industrial Association. This part of the National Standardization Technical Committee Wire and Cable (SAC/TC213) centralized. This section is responsible for drafting unit. Shanghai Electric Cable Research Institute. Participated in the drafting of this section. Wuxi Feilong Wire Co., Ltd., Wuxi Universal Wire Co., Ltd., Guangdong has a double benefit cable Ltd., Chongqing Pigeon Electric Wire & Cable Co., Ltd., Shaoxing City of Bo Cable Co., Ltd., Zhejiang Honglei Copper Co., Ltd. The drafters of section. section Peng Zheng, Huang Guofei, Huang Zhifei, Ma Dongliang, Hu Dong Yuan, Du Zhiyun, Mao Yi, and Wei Zhejiang strong. This part of the standard replaces the previous version of the case. --- GB/T 5584.3-1985. Electrician with copper, aluminum and its alloys flat wire Part 3. Aluminium flat wire

1 Scope

GB/T 5584 provisions of this part of the electrician aluminum flat wire models, specifications, technical requirements, test and delivery requirements. This section applies to electric and aluminum flat wire. This section should be used in conjunction with the GB/T 5584.1-2009.

2 Normative references

The following documents contain provisions which, through reference to GB/T 5584 to the present, constitute provisions of this section. Everything dated references article Member, all subsequent amendments (not including errata content) or revised edition are not used in this section, however, encouraged to reach under this section Parties to research agreement can use the latest versions of these files. For undated reference documents, the latest versions apply to this section. GB/T 3048.2-2007 metal conductor wire and cable resistivity test methods (IEC 60468. 1974, MOD) GB/T 4909.2-2009 Test methods for bare wires - Part 2. Measure GB/T 4909.3-2009 Test methods for bare wires - Part 3. Tensile Test GB/T 4909.6-2009 Test methods for bare wires - Part 6. unidirectional bending bending test --- GB/T 5584.1-2009 electrician with copper, aluminum and its alloys flat wire - Part 1. General requirements

3 Use Guidelines

This section provides an aluminum flat wire, either as a finished product, can also be an intermediate product. When used as an intermediate product, its size, the public Poor surface condition and supplementary provisions by mutual agreement, or the development of supplementary provisions by the relevant authorities.

4 Model

Aluminum flat wire models are shown in Table 1. Table 1 Model Type the name of the state LBR LBY2 LBY4 LBY4 H2 H4 H8 Soft aluminum flat wire H2 Status hard aluminum flat wire H4 state hard aluminum flat wire H8 state hard aluminum flat wire

5 Specifications

Aluminum flat wire should meet the specifications of GB/T 5584.1-2009 requirements.

6 Technical Requirements

6.1 should be consistent with the provisions of Table 2. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5584.3-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5584.3-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5584.3-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5584.3-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 5584.3-2009?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5584.3-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.