GB/T 5487-2015 English PDFUS$1579.00 · In stock
Delivery: <= 10 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 5487-2015: Determination of the gasoline octane number -- Test method for research octane number Status: Valid GB/T 5487: Historical versions
Basic dataStandard ID: GB/T 5487-2015 (GB/T5487-2015)Description (Translated English): Determination of the gasoline octane number -- Test method for research octane number Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: E30 Classification of International Standard: 75.160.20 Word Count Estimation: 75,76 Date of Issue: 2015-12-31 Date of Implementation: 2016-06-01 Older Standard (superseded by this standard): GB/T 5487-1995 Quoted Standard: GB/T 3144; GB/T 4756; GB/T 6682-2008; GB/T 8120; GB/T 8170; GB/T 11133; SH/T 0176; SH/T 0521; SY/T 5317 Regulation (derived from): State Standard Announcement 2015 No.43 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the test method for the determination of octane number of gasoline by the CFR octane test machine (research method). This standard is applicable to the determination of the octane number of the Ignition Engine Fuel Law and does not apply to fuels and their fuel components consisting essentially of oxygen-containing compounds. Note: The octane number ranges from 0 to 120, but the effective method of this standard is to measure the range of 40 to 120. The commercial octane number ranges from 88 to 101 for commercial spark ignition engines, and octane numbers for gasoline grades or other liquid substances. The values ??for the operating conditions of this standard are expressed in SI units, in brackets, in English units, and for standard CFR engines, in imperial units. GB/T 5487-2015: Determination of the gasoline octane number -- Test method for research octane number---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Determination of the gasoline octane number - Test method for research octane number ICS 75.160.20 E30 National Standards of People's Republic of China Replacing GB/T 5487-1995 Measurement of Gasoline Octane Research Method Issued on. 2015-12-31 2016-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions, abbreviations 1 SUMMARY 4. Method 4 5 Methods 5 6 disturbances 5 Instruments and equipment 6 7 8 8 Reagents and standards 9 sampling 10 Benchmarking and standard operating conditions of the engine and equipment 10 10 14 11 Engine standardization 12 test parameters characteristic 16 13 A --- interpolation method (fuel liquid level balance method) 20 14 Method B --- interpolation method (dynamic fuel level height method) 22 15 Method C --- compression ratio method 24 16 D --- interpolation method (octane analyzer OA) 26 17 octane computing 27 18 28 Precision and bias Report 19 29 Appendix A (normative) Safety Warning 31 Appendix B (normative) component information and installation instructions 33 Annex C (normative) standard fuel mixing table 41 Annex D (normative) knock intensity and cylinder operating table height compensation value of the operating table 44 Annex E (informative) auxiliary equipment 54 Annex F (informative) blending fuel volume than the standard instrument and step 56 Annex G (informative) technique - variable adjustment parameters 60 Appendix H (informative) Maintenance Technology 63 References 68ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 5487-1995 "Determination of gasoline octane number (research)." The main changes compared to 5487-1995 standard and GB/T as follows. --- Added "Chapter 1" and note effective research octane number of the test in the range of 40 to 120 statements; --- Added "Chapter 2 normative references" in our respective national standards and industry standards; --- Modified and added "Chapter 3 Terms and definitions, abbreviations" part of the terms and definitions; --- Added "Chapter 6 noise"; --- Modify the content of "Chapter 7, instruments and equipment," the increase of the engine, auxiliary devices, standard fuel dispensing device and auxiliary device Content prepared (see Chapter 6, 1995 edition); --- Revised Chapter 8 "Reagents and standards" chapter name, standard fuel specifications by reference to the specification (see 1995 edition Chapter 7); --- Added "Chapter 9 Sampling" Preventing exposure to light and the use of the contents of an opaque container to collect and store samples (see 1995 Chapter 8 edition); --- Added "Chapter 10 engine and equipment benchmarking and standard operating conditions" part (see 1995 edition 9 chapter); --- "Chapter 11 engine standardization" Compared with GB/T 5487-1995 Chapter 12 changes as follows. a) Calibration Test level changes frequently; b) when the engine calibration evaluation, calibration toluene standard fuel octane and tolerance as part of the revision; c) intake air temperature adjustment range should not exceed ± 22 ℃ (± 40 ℉); d) the range of different octane, toluene its selection criteria applicable fuel octane number of different steps. --- To increase the content of "Chapter 12 test parameters Characteristics"; --- Added "Chapter 13 Method A" Determination of the maximum allowable difference in the sample results in two standard fuel choice between; --- Amend the "Chapter 13 Method A" when measured octane, consistency checking operation table by interpolation; --- Added "Chapter 14, Method B" content; --- Amend the "Chapter 15 Method C" with a compression ratio method is only applicable to measuring octane range between 80 to 100 (see 1995 Chapter 14 edition); --- Amend the "Chapter 13, Chapter 14, Chapter 15," on the 90 octane level broadening set of 12 to 15 (see the 1995 edition 9.17,11.4); --- To increase the content of "Chapter 16 Method D" of; --- To increase the content of "Chapter 17 octane computing"; --- "Chapter 18 Precision and bias" list the methods A, B, C, D of precision and bias; --- Amend the "Chapter 19 Report" interpolation calculations or compressed than the prescribed test results (see the 1995 version of Chapter 15). This standard by the National Standardization Technical Committee on products and lubricant oil (SAC/TC280) proposed. This standard by the National Standardization Technical Committee of petroleum products lubricants oil and lubricants and fuels Technical Committee (SAC / TC280/SC1) centralized. This standard was drafted. China Petroleum & Chemical Corporation Research Institute of Petroleum. The main drafters of this standard. tube Hua, Fang Xiaopeng, Wang Shanshan, Lishao Yu, Li Guirong, Jihua Xi. This standard replaces the standards previously issued as follows. --- GB/T 5487-1985, GB/T 5487-1995. Measurement of Gasoline Octane Research Method WARNING --- This standard relates to certain hazardous materials, operations and equipment, but not for all of the safety issues related to this proposed construction Meeting. Therefore, the user before using this standard to establish appropriate safety measures, and determine the applicability of regulatory limitations related. About security Warning contents of Appendix A.1 ScopeThis standard specifies the gasoline octane number (research) Test Method for measuring CFR octane rating equipment. This standard is applicable to the determination ignition engine fuel in research octane number, it does not apply to fuel composed mainly of oxygen-containing compounds and Its fuel component. Note. The octane number in the range of 0 to 120, but the present standard of effective research octane number measurement range from 40 to 120. Automotive Spark Ignition Engine City Research octane fuel sold in the range of 88 to 101 can be obtained through the study of different grades of gasoline blending component testing or other liquid substances Octane. The value of the standard operating conditions with [SI] SI units, said Imperial units in parentheses represent values \u200b\u200bfor reference standards for CFR engine technical requirements in imperial units.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 3144 toluene Hydrocarbon Impurities by Gas Chromatography GB/T 4756 petroleum liquids hand sampling method (GB/T 4756-1998, eqv ISO 3170. 1988) GB/T 6682-2008 analytical laboratory use specifications and test methods (ISO 3696. 1987, MOD) GB/T 8120 high pure heptane and iso-octane purity assay (capillary chromatography) GB/T 8170 repair value expressed about the rules and limit values \u200b\u200band judgment GB/T 11133 Liquid petroleum products - Determination of water (Karl Fischer method) SH/T 0176 jet fuel peroxide value determination SH/T 0521 and propylene glycol based engine coolant SY/T 5317 petroleum liquids pipeline automatic sampling (SY/T 5317-2006, ISO 3171. 1988, IDT) 3 Terms and definitions, abbreviations 3.1 Terms and Definitions The following terms and definitions apply to this document. 3.1.1 Recognized standard value acceptedreferencevalue Unanimous endorsement of the standard value for comparison, derived from. a) value or measured value theory based on scientific principles; b) the value of the test in accordance with a national or international organization conferred; c) cooperation experimental work in accordance with a scientific or engineering group chaired by consensus recognized value. Note. This standard, recognized standard value should be understood as under reproducibility conditions, the exchange of national organizations or other approved AC pilot organizations have established special ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5487-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 5487-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 10 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 5487-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5487-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 5487-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5487-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
