GB/T 6986-2014 PDF EnglishUS$85.00 · In stock · Download in 9 seconds
GB/T 6986-2014: Standard test method for cloud point of petroleum products Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 6986: Historical versions
Similar standardsGB/T 6986-2014: Standard test method for cloud point of petroleum products---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT6986-2014GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 75.080 E 30 Replacing GB/T 6986-1986 Standard test method for cloud point of petroleum products Issued on: FEBRUARY 19, 2014 Implemented on: JUNE 01, 2014 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China; Standardization Administration of the People’s Republic of China. Table of ContentsForeword ... 3 1. Scope ... 5 2. Normative references ... 5 3. Terms and definitions ... 6 4. Summary of methods ... 7 5. Method application ... 8 6. Sampling and preparation of samples ... 8 7. Manual method ... 8 8. Automatic method ... 13 9. Result expression ... 17 10. Accuracy and deviation ... 17 11. Report ... 19ForewordThis Standard is drafted in accordance with the rules specified in GB/T 1.1-2009. This Standard replaces GB/T 6986-1986 Standard Test Method for Cloud Point of Petroleum. Compared with GB/T 6986-1986, the main technical changes are as follows. -- The title is changed into Standard Test Method for Cloud Point of Petroleum Products; -- Applicable scope is widened; add biodiesel and biodiesel fuel blend (see Chapter 1); -- Add requirements for sample chroma, that is, the chroma shall be no more than 3.5; samples with chroma exceeding 3.5 can also be tested according to this Standard, however, the precision is not applicable (see Chapter 1); -- Add automatic method (see Chapter 1, 8, 9.2 and 10); -- Add the explanation that the manual method means the arbitration method (see Chapter 1); -- Add “normative references” (see Chapter 2), “terms and definitions” (see Chapter 3); “method application” (see Chapter 5), and “report” (see Chapter 11); -- Add the explanation that the humidity shall not be more than 75% during the testing process (see 6.3); -- Add GB-36, GB-37 and GB-38 temperature gauges that conform to the requirements of GB/T 514 (see 7.1.1); -- Requirements for test tube’s inner diameter and the volume at the scale mark are different; -- Description of casing tube is different; -- Add the treatment process of sodium sulfate dehydrating agent (see 7.2.1), and requirements and processing procedures of filter paper (see 7.2.2); -- Cooling bath temperature control is slightly changed; -- There are some changes in transition temperature of samples in cooling bath; -- There are some changes in precision. This Standard is redrafted by referring to ASTM D2500-11 Standard Test Method for Cloud Point of Petroleum Products. Main technical differences between this Standard and ASTM D2500-11 are as follows. -- Add automatic method which is in accordance with ASTM D5771-12 Standard Test Method for Cloud Point of Petroleum Products (Optical detection classification cooling method) (see Chapter 1, 8, 9.2 and 10); -- Change the reference standards into current national standards and industry standards in China in the “normative references” (see Chapter 2); -- Add corresponding terms and definitions (see Chapter 3.3, 3.5 and 3.6); -- Add the explanation that the humidity shall not be more than 75% during the testing process (see Chapter 6.3); -- Add GB-36, GB-37 and GB-38 temperature gauges that conform to the requirements of China’s GB/T 514 (see 7.1.1); -- Add requirements for the volume at the test tube’s scale mark (see 7.1.2); -- Add the specifications and requirements for reagent, material and cleaning solvent (see 7.2 and 8.2); -- Add the treatment process of sodium sulfate dehydrating agent (see 7.2.1), and requirements and processing procedures of filter paper (see 7.2.2). This Standard was proposed by National Technical Committee of Petroleum Products and Lubricant Standardization (SAC/TC 280). This Standard shall be under the jurisdiction of Petroleum Fuel and Lubricant Branch of National Technical Committee of Petroleum Products and Lubricant Standardization (SAC/TC 280/SC 1). Drafting organizations of this Standard. SINOPEC Maoming Company. The participating drafting organizations of this Standard. SINOPEC Lubricant Maoming Company, Lanzhou Lubricant Research & Development Center of PetroChina Co Ltd., SINOPEC Zhenhai Refinery & Chemical Company, SINOPEC Lubricant Shanghai Company, MaoMing Entry-Exit Inspection and Quarantine of the PRC, and SINOPEC Lubricant Beijing Research & Development Center. Main drafters of this Standard. Dang Chenxia, Wang Xuemei, Pan Xiaoxia, Huang Hongxia, Gao Yun, Li Ling, Liang Yuquan, and Cui Hai’ou. Previous version replaced by this Standard is as follows. -- GB/T 6986-1986. Standard Test Method for Cloud Point of Petroleum Products Warning. This Standard involves certain dangerous materials, operations and equipment, however, it does not put forward suggestions on all safety problems involved. Therefore, proper safety and protection measures shall be established before the users apply this Standard in practice, and the applicability of relevant rules and regulations shall be determined.1. ScopeThis Standard specifies two test methods, namely, manual and automatic methods, for cloud point of petroleum products, biodiesel and biodiesel fuel blend. The manual method is deemed as the arbitration method. This Standard only applies to testing cloud point of petroleum products, biodiesel and biodiesel fuel blend of which the cloud point is less than 49°C when it is transparent at the thickness of 40 mm. Note. Chroma of samples tested in accordance with this Standard shall be ≤3.5 (according to GB/T 6540); samples with chroma exceeding 3.5 can also be tested according to this Standard, however, the precision is not applicable.2. Normative referencesThe following documents are indispensable for application of this document. For the dated documents so quoted, only dated versions apply to this document. For the undated documents so quoted, the latest versions (including all modification sheets) apply to this document. GB/T 514-2005 Specification for liquid-in-glass thermometers for testing of petroleum products GB 1922-2006 Petroleum solvents for paints and cleaning GB/T 4756 Petroleum liquids - Manual sampling (GB/T 4756-1998, eqv ISO 3170.1988) GB/T 6540 Petroleum products - Determination of colour GB/T 15000.3 Directives for the work of reference materials (3) - Reference materials - General and statistical principles for certification (GB/T 15000.3-2008, ISO Guide 35.2006, IDT) GB/T 15000.7 Directives for the work of reference materials (7) - General requirements for the competence of reference material producers (GB/T 15000.7-2012, ISO Guide 34.2009, IDT) GB 17602 Commercial hexanes JB/T 8622 Technical specification and reference table for industrial platinum thermal resistance (JB/T 8622-1997, neq IEC 751.1983)3. Terms and definitionsFollowing terms and definitions apply to this Standard. 3.1 Biodiesel It is a kind of fuel derived from vegetable oil or animal fat, and it is composed of long-chain fatty acid mono-alkyl ester, expressed by BD100. Note. Typical biodiesel is a kind of monoester produced in the reaction BETWEEN vegetable oil or animal fat AND alcohol (e.g. methyl alcohol or ethyl alcohol) by using catalyst. The fuel may include up to 14 different fatty acids, and the fatty acid methyl ester (FAME) that is transformed through chemical reactions. 3.2 Biodiesel fuel blend It is a blend of biodiesel and petroleum distillate fuel, expressed by Bxx. In which, xx means the volume percentage of biodiesel. 3.3 Distillate fuels It refers to the atmospheric or vacuum distillate oil and their product fuels, obtained through primary processing or second processing. 3.4 Cloud point It means the highest temperature at which the clear-transparent liquid petroleum products, biodiesel and biodiesel fuel blend APPEAR in foggy or turbid state at the first time under the specified conditions because of the appearance of wax crystals. It is expressed by °C. Note 1. For many observers, wax crystal looks like a cloud in white or milky turbid spots, which wins the name for it. When the sample’s temperature decreases to a certain degree, wax crystal will form, and turbid state will appear. For many samples, the crystal first appears at the lower part around the wall of the test tube with the lowest temperature. The difference of sample nature will result in different sizes and positions of crystal and turbidity at the cloud point. Some samples will form large and easy-to-observe crystals, while others form crystals method or through continuous monitoring of optical system. The highest temperature, at which wax crystal first appears at the bottom of the test tube and presents fog or turbid state, is the cloud point of the sample, expresse... ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 6986-2014 be delivered?Answer: The full copy PDF of English version of GB/T 6986-2014 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 6986-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6986-2014_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 6986-2014 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 6986-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6986-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 6986-2014?A step-by-step guide to download PDF of GB/T 6986-2014_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 6986-2014". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
