GB/T 5169.17-2017 English PDFUS$564.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 5169.17-2017: Fire hazard testing for electric and electronic products -- Part 17: Test flames--500 W flame test method Status: Valid GB/T 5169.17: Historical versions
Basic dataStandard ID: GB/T 5169.17-2017 (GB/T5169.17-2017)Description (Translated English): Fire hazard testing for electric and electronic products -- Part 17: Test flames--500 W flame test method Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K04 Classification of International Standard: 13.220.40; 29.020 Word Count Estimation: 30,387 Date of Issue: 2017-12-29 Date of Implementation: 2018-07-01 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 5169.17-2017: Fire hazard testing for electric and electronic products -- Part 17: Test flames--500 W flame test method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Fire hazard testing for electric and electronic products-Part 17. Test flames-500 W flame test method ICS 13.220.40; 29.020 K04 National Standards of People's Republic of China Replacing GB/T 5169.17-2008 Electrical and Electronic Products Fire Hazard Test Part 17. Test flame 500W flame test method Part 17. Testflames-500Wflametestmethod (IEC 60695-11-20.2015, Firehazard testing-Part 11-20. Testflames- 500Wflametestmethod, IDT) 2017-12-29 released.2018-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Administration released Directory Preface III Introduction V 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Principle 5 5 The significance of the fire test 5 6 Test apparatus 5 7 Sample 7 8 Test procedure 8 Appendix A (Normative) Detailed requirements for flame application points 17 Reference 22 Figure 1 Vertical burning test of strip specimens 12 Figure 2 Horizontal burning test of plate specimen 13 Figure 3 Burner Mounting Station (Example) 13 Figure 4 Sample 14 Figure 5 Example of flame application 15 Figure 6 5V sample gauge (example) 16 Figure A.1 Applying a point to the flame of a dynamically deformed specimen 18 Figure A.2 Applying a point to the flame of a specimen that has been distorted and deformed J Figure A.3 Flame application point for rolled sample 20 Figure A.4 Flame application point 21 when the specimen is severely deformed Table 1 Tolerance of nominal thickness 8 Table 2 5V combustion classification 11 ForewordGB/T 5169 "Ignition Hazard Test for Electrical and Electronic Products" consists of the following components. --- Part 1. Fire test terminology; -- Part 2 . General guidelines for the assessment of fire hazards ; --- Part 5. Test flame needle flame test method device, confirm test method and guide; --- Part 9 . Guidelines for the assessment of fire hazards -- General rules for preselection test procedures ; --- Part 10. Glow wire/hot wire basic test methods Glow wire apparatus and general test methods; Part 11 . Glow wire/hot wire basic test methods Glow wire flammability test method for finished products (GWEPT); Part 12 . Glowing/hot wire basic test methods Glow - wire flammability index (GWFI) test method for materials; --- Part 13. Glow wire/hot wire basic test methods Glow wire light-off temperature (GWIT) test method for materials; --- Part 14. Test flame 1kW nominal premixed flame apparatus, confirmatory test methods and guidelines; --- Part 15. Test flame 500W flame device and confirmation test method; --- Part 16. Test flame 50W horizontal and vertical flame test methods; --- Part 17. Test flame 500W flame test method; --- Part 18. General principles of toxicity of combustion streams; --- Part 19. Abnormal thermal moulding stress release deformation test; --- Part 20. Summary and correlation of test methods for flame surface propagation; --- Part 21. Test methods for abnormal hot ball pressure; --- Part 22. Test flame 50W flame device and confirmation test method; --- Part 23. Test flame tubular polymeric material 500W vertical flame test method; --- Part 24 . Guidelines for the assessment of fire hazards ; insulating liquids ; --- Part 25. General rules of smoke blur; --- Part 26. Smoke fuzzing test method outline and correlation; --- Part 27. Smoke fuzzy small-scale static test method Instrument description; --- Part 28. Smoke obfuscation small-scale static test method materials; --- Part 29. General heat release; --- Part 30. Summary and correlation of heat release test methods; --- Part 31 . General flame spread ; --- Part 32. Heat release of heat-release insulating liquids; --- Part 33 . Guidelines for the assessment of fire hazards -- General guidelines for flammability ; --- Part 34 . Guidance for assessing the dangers of fire ignition . Summary and relevance of flammability test methods ; --- Part 35 . General hazards of corrosion hazards of combustion streams ; --- Part 36 . Summary and correlation of test methods for corrosion hazard of combustion streams ; --- Part 38. Summary and correlation of toxicity testing methods for combustion streams; --- Part 39. Use and description of the results of the toxicity test of combustion streams; --- Part 40. Toxicity and toxicity assessment apparatus and test methods for combustion streams; --- Part 41. Calculation and description of test results for toxicity assessment of the combustion stream; --- Part 42. Guidelines for test flame verification tests; --- Part 44. Guidelines for assessing the dangers of a fire. Fire hazard assessment. This section is part 17 of GB/T 5169. This section was drafted in accordance with the rules given in GB/T 1.1-2009. This Part replaces GB/T 5169.17-2008 "Electrical and Electronic Products Fire Hazard Test Part 17. Test Flame 500W Fire Flame test method, compared with GB/T 5169.17-2008, the main technical changes are as follows. --- Changed the chapter on normative references (see Chapter 2,.2008 Edition, Chapter 2); --- Revised part of the terms and definitions (see Chapter 3, Chapter 3 of the.2008 Edition); --- Modify the "sample" requirements (see Chapter 7,.2008 Edition, Chapter 7); --- Revised the layout of the "Test Procedures" chapter and revised the statement of the 5V combustion rating method (see Chapter 8,.2008 Edition) Chapter 8);" --- Added "an example of flame application" "5V sample gauge (example)" diagram (see Figure 5, Figure 6); --- Deleted the "Test Method Accuracy" appendix (2008 Edition Appendix A); --- Added an appendix to "Detailed requirements for flame application points" (see Appendix A). This section uses the translation method identical to the use of IEC 60695-11-20.2015 "Ignition Hazard Test Part 11-20. Test Flame 500W Flame test method." The Chinese documents that are consistent with the normatively quoted international documents in this section are as follows. ---GB/T 5169.15-2015 Fire hazard test for electric and electronic products Part 15. Test flame 500W flame Apparatus and confirmatory test method (IEC 60695-11-3.2012, IDT) ---GB/T 5169.16-2017 Fire hazard test for electric and electronic products Part 16. Test flame 50W Horizontal and vertical Straight flame test method (IEC 60695-11-10.2013, IDT) ---GB/T 5471-2008 Plastic Thermoset Plastic Specimen Compression (ISO 295.2004, IDT) ---GB/T 9352-2008 Plastic Thermoplastic Material Specimen Compression (ISO 293.2004, IDT) ---GB/T 16499-2008 Preparation of safety publications and application of basic safety publications and multi-distribution shared safety publications Guidelines (neq IEC Guide 104.1997) --- Drafting of specific content in the GB/T 20002.4-2015 standard. Part 4. Content involving security in the standard (ISO / IEC Guide51.2014,MOD) This section made the following editorial changes. --- In keeping with the existing standard series, the standard name is changed to "Ignition hazard test for electric and electronic products - Part 17. Test flame 500W Flame Test Method." This part is proposed by the China Electrical Appliance Industry Association. This part is under the jurisdiction of the National Standardization Technical Committee for Fire and Hazard Testing of Electrical and Electronic Products (SAC/TC300). This section is responsible for drafting. China Electric Apparatus Research Institute Co., Ltd. This section participated in the drafting. Dongguan Entry-Exit Inspection and Quarantine Bureau Inspection and Quarantine Comprehensive Technology Center, Guangdong Yuanrong New Materials Co., Ltd. Beijing Territor Testing Technology Service Co., Ltd., Wenzhou Yaohua Telecom Co., Ltd., Guangdong Entry-Exit Inspection and Quarantine Bureau Inspection and Quarantine Technology Center, Weikai Detection Technology Co., Ltd., Zhongjiayuan (Beijing) Testing & Certification Co., Ltd., Shenzhen Metrology and Quality Inspection Institute, China Electronics Technical Standardization Institute, Wuxi Sunan Test Equipment Co., Ltd., Zhuhai Gree Electric Co., Ltd., and the Ministry of Industry and Information Technology Five Institute, Shandong Province Product Quality Inspection Institute. The main drafters of this section. Wu Qian, Zheng Shaofeng, Chen Xin, Gao Lingsong, Wang Sheng, Huang Kaiyun, Wu Zheng, Liu Yan, Wan Cheng, Wang Tong, Li Yuxi, Ni Yunnan, Chen Xiaoli, Zhang Yuanqin, Peng Lei. The previous editions of the standards replaced by this section are. --- GB/T 5169.17-2002, GB/T 5169.17-2008.IntroductionAll electrical and electronic products are designed to take into account fire risk and potential fire hazards. The design of components, circuits and equipment as well as The purpose of the screening of materials is to be able to ignite potential fires under normal operating conditions and in reasonably foreseeable abnormal use, failure and failure. The risk is reduced to an acceptable level. Fires involving electric and electronic products may also be caused by non-electrical sources of external ignition. Overall risk assessment Estimates should consider this factor. The purpose of the IEC 60695 series of standards is to save people and property by reducing the number of fires or reducing the negative consequences of fires. It passes below Way to achieve. ---Prevent the ignition of live parts; if ignition occurs, limit the fire to the enclosure of electric and electronic products. --- Minimize the spread of flames to the outside of the product, and harmful effects such as heat, smoke, toxic and/or corrosive combustion streams The ring dropped to a minimum. This section describes two small-scale test methods performed on materials for electrical equipment. Use a 500W test flame as the ignition source. The grading methods specified in this part can be used for quality assurance, preselection of product part materials, or verification of the minimum burning of materials used in finished products. grade. This test method cannot be used alone to describe or evaluate the risk of fire or ignition of materials, products or components under actual fire conditions. However, the results of this test can be used as an element of a fire risk assessment that takes all factors into account, the fire risk assessment and a specific end use. The assessment of the fire hazard on the way is relevant. This section may involve hazardous materials, operations, and equipment. Its purpose is not to solve all safety issues related to it. question. Before using this section, users of this section should establish appropriate safety and health measures and determine their applicability and limitations. Electrical and Electronic Products Fire Hazard Test Part 17. Test flame 500W flame test method1 ScopeThis part of GB/T 5169 describes a test method consisting of two small-scale test procedures aimed at comparing electrical and electronic The combustion characteristics of different materials in the product. Expose vertically placed strips or horizontally placed slabs to nominal power 500W The small flame ignition source. The test method is to classify the material properties with two shapes of specimens. Rectangular strips for evaluation The ignitability and flammability of the test specimens are determined, and square shaped test specimens are used to evaluate the burnthrough resistance of the test specimens, as described in 8.3.3. This test The method is only applicable to materials that comply with IEC 60695-11-10 V-0 or V-1. This test method is only applicable to solid/microporous materials with an apparent density greater than 250kg/m3 determined according to ISO 845; not applicable The material that collapses because it is too thin to catch fire and does not ignite. The grading method specified in this test method can be used for quality assurance, pre-selection of product part materials, or verification of the materials used in finished products. Minimum combustion rating. If used for preselection, the thickness of the test specimen should be the same as the minimum thickness used for the application in order to obtain a true result. Although the test results provide some properties of the plastic when it is used, it cannot be used to determine the safety performance of the material when it is used. Note 1. See IEC 60695-1-30 for preselection guidelines. NOTE 2 The test results are influenced by the material additives and properties such as colorants, fillers and flame retardants, the latter being anisotropic in direction and molecular weight. This section is intended to be prepared by the product standard committee in accordance with the principles laid down in IEC Guide 104.2010 and ISO /IEC Guide 51.1999. standard. One of the tasks of the Product Standards Committee is to use this series of standards where applicable. Unless relevant It is specifically mentioned or listed, otherwise the requirements, test methods or test conditions of this part will not apply.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 5169.1-2015 Fire hazard testing for electric and electronic products. Part 1. Terminology of fire test (IEC 60695-4.2012, IDT) ISO 291.1997 Plastics-Standard atmospheres for con- Ditioningandtesting) ISO 293 Plastic Thermoplastic Plastic Specimen Compression (Plastics-Compressionmouldingoftestspecimensof Thermoplasticmaterials) ISO 294.1996 (all parts) Plastics-Injectionmouldingoftest Specimensofthermoplasticmaterials) ISO 295 Plastic Compression Molding of testspecimensof Thermosettingmaterials) ISO 845 Determination of apparent density of foams and rubbers (Celularplasticsandrubbers-Determinationof Apparentdensity) ISO 13943.2008 Fire Safety-Vocabulary ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5169.17-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 5169.17-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 5169.17-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5169.17-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 5169.17-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5169.17-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
