GB/T 5018-2008 English PDF

US$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5018-2008: Standard test method for determining corrosion preventive properties of lubricating greases
Status: Valid

GB/T 5018: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 5018-2008	329	Add to Cart	3 days	Standard test method for determining corrosion preventive properties of lubricating greases	Valid
GB/T 5018-1985	279	Add to Cart	3 days	Standard test method for corrosion preventive properties of lubricating greases	Obsolete

Similar standards

GB/T 7323   GB/T 36990   GB/T 5671   GB/T 7324   

Basic data

Standard ID: GB/T 5018-2008 (GB/T5018-2008)
Description (Translated English): Standard test method for determining corrosion preventive properties of lubricating greases
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: E36
Classification of International Standard: 75.100
Word Count Estimation: 14,118
Date of Issue: 2008-02-13
Date of Implementation: 2008-09-01
Older Standard (superseded by this standard): GB/T 5018-1985
Quoted Standard: GB/T 6682; SH 0005
Adopted Standard: ASTM D1743-2005a, MOD
Regulation (derived from): National Standard Approval Announcement 2008 No.2 (Total No.115)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the conditions under wet coated with grease tapered roller bearing grease to determine the corrosion resistance. This standard is based on the technical conditions can represent CRC laboratory evaluation results with grease lubricated wheel bearings actual results aircraft correspondence between L41 making. This standard has no intention to point out all of the safety problems, so the user before using this standard to establish appropriate safety and health practices and determine the applicability of the management system.

GB/T 5018-2008: Standard test method for determining corrosion preventive properties of lubricating greases

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Standard test method for determining corrosion preventive properties of lubricating greases ICS 75.100 E36 National Standards of People's Republic of China Replacing GB/T 5018-1985 Grease corrosion test method Posted 2008-02-13 2008-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This revised standard adopts the American Society for Testing and Materials standard ASTMD1743-05a "grease corrosion test method." This standard redrafted according ASTMD1743-05a. In order for our country, the present standard when using ASTMD1743-05a been modified. This standard ASTMD1743-05a The main differences are as follows. --- Reference standard using China's current national standards and petrochemical industry standards. --- Motor speed increases the optional speed 1450r/min ± 50r/min of. --- Figure involved in imperial units converted to SI units. --- Remove the keyword chapter. This standard replaces GB/T 5018-1985 "Grease corrosion test method", GB/T 5018-1985 reference ASTM D1743. 1973 (81) established. The main changes compared to 5018-1985 standard and GB/T as follows. --- Press ASTMD1743-05a test procedure has been modified. --- Test bearings from the 7604 Timken bearings or bearings (cone No.09074, outer No.09169) to model LM11949 and LM11910 bearing cone bearing outer ring of the bearing. --- Test results assessed by ASTMD1743-05a been modified. --- Precision press ASTMD1743-05a been modified. --- This standard GB/T 5018-1985 Appendix A to Appendix A (informative) "Release Notes", and added Appendix B (Informative) "alternative test method for corrosion prevention." The Standard Appendix A and Appendix B are informative. The standard proposed by China Petroleum and Chemical Corporation. The standard by the China Research Institute of Petroleum Corp. petrochemicals. This standard was drafted. China Petroleum & Chemical Corporation Research Institute of Petroleum. The main drafters of this standard. Liu thereof, Yao Zhiqin. This standard replaces the standards previously issued as follows. --- GB/T 5018-1985. Grease corrosion test method

1 Scope

This standard specifies the conditions under wet coated with grease tapered roller bearing grease to measure corrosion. This standard is According to the technical documentation can be expressed CRC laboratory evaluation result corresponds with the actual use of the results of aircraft wheel bearings with grease lubrication of L41 developed. Note. American Scientific Partnership Committee (CRC) technical documents L41-957 studied in the presence of free water corrosion test grease square law. CRC's address 219PerimeterCenterParkway, Atlanta, GA30346. USA. This standard is not intended to point out all of the safety problems, so users in the use of this standard to establish appropriate safety and health practices and Determine the applicability of the management system.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 6682 Water Analysis Laboratory specifications and test methods (GB/T 6682-1992, neq ISO 3696. 1987) SH0005 industrial paint solvent oil

3 Terms and Definitions

The following terms and definitions apply to this standard. 3.1 A material, usually a chemical or electrochemical reaction between a metal and its presence in the environment, this reaction may cause such material properties Reduced. NOTE. In this standard, the raceway red rust or corrosion spots defined in the bearing outer ring. If the stain is still visible under the metal surface, the stain in this standard does not recognize As is corrosion, and should be ignored. 4. Summary The new cleaning net coated with grease sample bearing a slight load operation under 60s ± 3s thrust, as the grease in actual use distributed. Bearing storage 48h ± 0.5h at 52 ℃ ± 1 ℃ and 100% relative humidity, and then clean and inspect the bearing outer ring raceway Signs of corrosion. 5. Significance and Uses This test method can be used to distinguish between different grease under the test conditions, the relative corrosion resistance.

6 Instruments

6.1 Bearings. the LM11949 and LM11910 bearing cone bearing outer ring. 6.2 motor. speed is 1450r/min ± 50r/min or 1750r/min ± 50r/min, 50W (minimum). ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5018-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5018-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5018-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5018-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 5018-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5018-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.