GB/T 4676-2018 English PDF

US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 4676-2018: Abrasive grains -- Sampling and splitting
Status: Valid

GB/T 4676: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 4676-2018	359	Add to Cart	4 days	Abrasive grains -- Sampling and splitting	Valid
GB/T 4676-2003	399	Add to Cart	3 days	Abrasive grains -- Sampling and splitting	Obsolete
GB/T 4676-1984	239	Add to Cart	2 days	Method for sampling of conventional abrasive grains	Obsolete

Similar standards

GB/T 2493   GB/T 2480   GB/T 23541   GB/T 2476   GB/T 4127.14   

Basic data

Standard ID: GB/T 4676-2018 (GB/T4676-2018)
Description (Translated English): Abrasive grains -- Sampling and splitting
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J43
Classification of International Standard: 25.100.70
Word Count Estimation: 18,111
Date of Issue: 2018-09-17
Date of Implementation: 2019-04-01
Older Standard (superseded by this standard): GB/T 4676-2003
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 4676-2018: Abrasive grains -- Sampling and splitting

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Abrasive grains - Sampling and splitting ICS 25.100.70 J43 National Standards of People's Republic of China Replace GB/T 4676-2003 Ordinary abrasive sampling method (ISO 9138.2015, MOD) Published on.2018-09-17 Implementation of.2019-04-01 State market supervision and administration China National Standardization Administration issued

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 4676-2003 "General Abrasive Sampling Method", and the main changes compared with GB/T 4676-2003 are as follows. --- Revised the general requirements for the sampler (see 5.1.1, 5.1 of the.2003 edition); --- Deleted the informative appendix and added the contents of the sampler to the text (see 5.1.6, Appendix A of the.2003 edition); --- Increased the type of sampler (see 5.1.3, 5.1.4, 5.1.5); --- Added the content sampled from the pouch (see 7.2.2.2); --- Increased the method of shrinking the artificial quadrant (see 8.2); --- Revised the sample storage time, from 3 months to 6 months (see 9.2,.2003 version 9.2); --- Increased structural changes with international standards (see Appendix A). This standard uses the redrafting method to modify the use of ISO 9138.2015 "abrasive sampling and shrinking". Compared with ISO 9138.2015, this standard has more structural adjustments. Appendix A lists this standard and ISO 9138.2015. The chapter number is compared to the list. The technical differences between this standard and ISO 9138.2015 and their reasons are as follows. ---About the normative reference documents, this standard has made technical adjustments to adapt to China's technical conditions, adjustments The situation is reflected in Chapter 2, “Regulatory References”, and the specific adjustments are as follows. ● Replace ISO 8486-1 with GB/T 2481.1 modified with international standards (see 5.1.1); ● Replace ISO 8486-2 with GB/T 2481.2 (see 5.1.1); ● Replace ISO 6344-1 with GB/T 9258.1 equivalent to the international standard (see 5.1.1); ● Added reference to GB/T 8170 (see 7.1.2). --- In addition to the application of abrasives, the scope of the corundum series and carbide series for non-grinding applications can be referred to. Content to meet the actual needs of our country; --- Added terms and definitions (see Chapter 3) and general provisions (see Chapter 4) to facilitate the understanding and application of this standard; --- Revised the specification of the insertion angle of the sampler, unified to 45 ° ~ 60 °; --- Added Type 5 sampler (see 5.1.6), as this type of sampler is often used in China; --- Added sampling shovel, sample shovel and sampler, as these are also commonly used tools in sampling and shrinking processes; --- Added specific provisions for the size of the reducer to improve the standard operability; --- Revised the requirements for sample volume to improve standard operability (see Chapter 6, ISO 9138.2015 4.1 and 4.5); --- Added a description of the sampling method (see 7.1) to improve the standard operability; --- Increased sampling shovel sampling (see 7.2.2.3), mesh reduction method and cone quadrilateral method (see 8.3, 8.4) to meet the actual situation in China need; --- Increased the content of sample storage (see Chapter 9), etc., to improve the standard content. This standard has made the following editorial changes. --- The standard name was changed to "Ordinary Abrasive Sampling Method"; --- Added informative Appendix A. This standard was proposed by the China Machinery Industry Federation. This standard is under the jurisdiction of the National Abrasives Standardization Technical Committee (SAC/TC139). This standard was drafted. Guizhou Dazhong No.7 Grinding Wheel Co., Ltd., Zhengzhou Abrasives Grinding Research Institute Co., Ltd., Pingdingshanyi Chengxin Materials Co., Ltd. The main drafters of this standard. Cheng Suhua, Li Xiangdong, Bao Hua, Xia Jun, Wang Jinping, Zhang Yi, Su Yan, Zhang Liang. The previous versions of the standards replaced by this standard are. ---GB/T 4676-1984, GB/T 4676-2003. Ordinary abrasive sampling method

1 Scope

This standard specifies the terms and definitions of general abrasive sampling methods, general rules, sampling and shrinking tools, samples, sampling, shrinkage and samples. Product storage. This standard applies to ordinary abrasives. Corundum series and carbide series products for non-grinding purposes can be used as reference.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 2481.1 Determination and marking of abrasive grain size of bonded abrasives - Part 1 . coarse abrasives F4~F220 (GB/T 2481.1-1998, eqvISO 8486-1.1996) GB/T 2481.2 Fixed abrasives - Determination and marking of abrasive grain size - Part 2 GB/T 8170 Numerical Rounding Rules and Representation and Determination of Limit Values GB/T 9258.1 Specification for abrasive grain size for coated abrasives - Part 1 ISO 6344-1.1998, IDT)

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Batch lot A certain number of products produced under the same production conditions. 3.2 Delivery batch consignment A certain number of products that are supplied to customers at one time. Note. A delivery batch consists of one or several production batches, or it can consist of one part of a production batch or parts of several production lots. 3.3 Inspection lot testlot A number of products for inspection sampling. 3.4 Sample sample A certain quantity of products extracted from the inspection lot is used for physical and chemical analysis to provide a basis for judging whether the product meets the requirements. 3.5 Increment A large sample taken from the packaging unit at a time. 3.6 Large sample The sum of all samples taken from the same specification inspection lot. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 4676-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 4676-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 4676-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 4676-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 4676-2018?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4676-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.