GB/T 4654-2008 English PDFUS$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 4654-2008: The general technical specifications for non-metallic basic body infrared heater Status: Valid GB/T 4654: Historical versions
Basic dataStandard ID: GB/T 4654-2008 (GB/T4654-2008)Description (Translated English): The general technical specifications for non-metallic basic body infrared heater Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K61 Classification of International Standard: 25.180.10 Word Count Estimation: 13,184 Date of Issue: 2008-06-30 Date of Implementation: 2009-04-01 Older Standard (superseded by this standard): GB/T 4654-1984 Regulation (derived from): Announcement of Newly Approved National Standards No. 11 of 2008 (No. 124 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the metallic matrix of the type of infrared heater specifications, technical requirements, test methods, inspection rules, marking, manual, packaging, transport and storage of content. This standard applies to silicon carbide, zircon sand, quartz glass, glass, ceramic, black zirconium, black magnetic, vanadium and titanium black porcelain, semiconductor heating element, carbon crystal heating panels, carbon fiber, polyester film and other non- metal materials for the radiation matrix, alloy resistance wire, carbon fiber resistance wire, resistive film, conductive ceramics and other materials for the electric heating element various low-temperature, medium temperature and high-temperature electric infrared radiant heaters (hereinafter referred to as a heater). Heaters as energy-saving products, mainly used in industry, agriculture, health care, building heating, transportation and other areas of heating and drying equipment. GB/T 4654-2008: The general technical specifications for non-metallic basic body infrared heater---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.The general technical specifications for non-metallic basic body infrared heater ICS 25.180.10 K61 National Standards of People's Republic of China Replacing GB/T 4654-1984 Non-metallic matrix of infrared heater General technical conditions Posted 2008-06-30 2009-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 type structure and specifications and the basic parameters 2 5 Technical requirements 3 Test Method 5 6 7 7 inspection rules 8 signs, packaging, transportation and storage 7ForewordThis standard replaces GB/T 4654-1984 "silicon carbide and zircon ceramic infrared heaters General technical conditions", with the latter phase Ratio, the main differences are as follows. --- Scope of silicon carbide and zircon ceramic infrared heater temperature to be extended to all types of non-metallic materials for the radiation matrix A variety of low, medium temperature and high temperature electric infrared radiant heaters, radiant heater matrix specifically include silicon carbide, zircon sand, Quartz glass, glass, ceramics, zirconia black, black magnetic, vanadium and titanium black porcelain, semiconductor heating film, carbon crystal heating panels, carbon fiber, poly Ester film of other non-metallic materials; --- Added "Normative references" and "Terms and Definitions" in two parts; --- On the "heating time" (the original "hot response time" is) and "radiating surface temperature unevenness" and other performance parameters redefined; Type structure --- the heater and the typical specifications increases the planar structure of the product; --- Technical requirements for part of the increase of the "operating temperature leakage current and electric strength", "resistance to moisture", "electric - heat radiation efficiency" Heater temperature increase for the compound with visibly glowing; "terminal pull", "mechanical strength" and "overload" and other assessment indicators Plus "radiant energy efficient than" requirement; and for the molding material to radiation of a flexible substrate plane heater to increase the "folding Test "," peel strength "," flame retardant "and" cold storage "assessment indicators; --- Adjust the product part of the technical indicators requirements, including. working life increased from 2000h to 5000h, power deviation from the -5% - + 5% + 10% adjusted to 5%, heating time by 20min tubular heaters down to 15min, lamp shape plus The heat from the warm-up time down to 12min 10min, radiating temperature unevenness from 20% to 10% and so on; --- Test Method GB/T 7287-2008 "Test Method of infrared heater" uniformly implemented. The standard proposed by China Electrical Equipment Industrial Association. This standard by the National Electric Equipment Industry Standardization Technical Committee (SAC/TC121) centralized. This standard was drafted. National Infrared and Industrial Electric Products Quality Supervision and Inspection Center, Shanghai St. Adorno Electric Materials Co., Ltd., Guangzhou Ha Construction Group Co., Ltd., Jiaxing City Wo Lin heat radiation Ltd., Suzhou Huaneng Carbon Fiber Co., Ltd., Nanjing Dan Link Technology Ltd., a large chain of Infrared Technology Development Co., Ltd. The main drafters of this standard. Zeng Yu, Xiong Jie, Ye Ping, land Chi, Chu Jiang, Lu Jinde, Wangguang Xiang, Renan Bang, Fumihiko Luan. This standard is replaced by the following previous release case. --- GB/T 4654-1984. Non-metallic matrix of infrared heater General technical conditions1 ScopeThis standard specifies a non-metallic matrix of infrared radiant heaters of the type specifications, technical requirements, test methods, inspection rules, marks, use Brochures, packaging, transport and storage and so on. This standard applies to silicon carbide, zircon sand, quartz glass, glass, ceramics, zirconia black, black magnetic, vanadium and titanium black porcelain, semiconductor fever Sheet, carbon crystal heating panels, carbon fiber, polyester film and other non-metallic materials for the radiation matrix alloy resistance wire, carbon fiber resistance wire, resistive film, A variety of low-temperature conductivity ceramics and other materials for the electric heating element, the temperature and high-temperature electric infrared radiant heaters (hereinafter referred to as the heater). Heater as a energy-saving products, mainly used in industrial, agricultural, medical, building heating, transportation and other areas of heating and drying provided Saddled.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 2900.23-2008 Electrotechnical terminology industrial electric equipment (IEC 60050-841.2004, IDT) Test methods GB/T 10066.12-2006 electric installations - Part 12. Infrared heating device GB/T 7287-2008 Test Method for Infrared radiant heaters (IEC 60137Ed.6.0, MOD)3 Terms and DefinitionsGB/T 2900.23-2008, GB/T 10066.12-2006 and GB/T 7287-2008 and established the following terms and definitions Apply to this standard. 3.1 Will be converted to heat energy of the heat conductive material, the heat source for the heater. 3.2 Connected with the heating element, the power supply for the heater, the heater and the heater is connected with a conductive metal parts. 3.3 The ability to use a strong infrared radiation itself, the thermal energy of the heat generating element is efficiently converted to infrared radiation energy, and the heat generator strut Member support role. 3.4 Radiating heater on electric power per unit area, in units of W/cm2. 3.5 Heater of the following circumstances shall be deemed to damage. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 4654-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 4654-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 4654-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 4654-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 4654-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4654-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
