Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 4476.4-2008 English PDF

Q: How long will the true-PDF of English version of GB/T 4476.4-2008 be delivered?

Upon your order, we will start to translate GB/T 4476.4-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Q: Can I share the purchased PDF of GB/T 4476.4-2008_English with my colleagues?

Yes. The purchased PDF of GB/T 4476.4-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Q: Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Q: Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Q: Should I purchase the latest version GB/T 4476.4-2008?

Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4476.4-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 4476.4-2008: Drawing for metal hull of ships -- Part 4: Dimensioning
Status: Valid

GB/T 4476.4: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 4476.4-2008	279	Add to Cart	3 days	Drawing for metal hull of ships -- Part 4: Dimensioning	Valid
GB/T 4476.4-1984	359	Add to Cart	3 days	Drawings for metal hull of ships--Dimensioning	Obsolete

Similar standards

GB/T 7094 CB 1146.8 CB 1146.9 GB/T 7727.5 GB/T 4476.3 GB/T 4476.1

Basic data

Standard ID: GB/T 4476.4-2008 (GB/T4476.4-2008)
Description (Translated English): Drawing for metal hull of ships -- Part 4: Dimensioning
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: U04
Classification of International Standard: 47.020
Word Count Estimation: 12,151
Date of Issue: 2008-08-04
Date of Implementation: 2009-02-01
Older Standard (superseded by this standard): GB/T 4476.4-1984
Regulation (derived from): National Standard Approval Announcement 2008 No.12 (Total No.125)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the method of the metal hull dimensions when drawing. This section applies to civilian ships and military assisted cartography metal hull of the ship.

GB/T 4476.4-2008: Drawing for metal hull of ships -- Part 4: Dimensioning

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Drawing for metal hull of ships Part 4. Dimensioning ICS 47.020 U04 National Standards of People's Republic of China Replacing GB/T 4476.4-1984 Metal hull Drawing Part 4. Dimensioning Posted 2008-08-04 2009-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 4476 "Drawing metal hull" is divided into four parts. --- Part 1. General requirements; --- Part 2. Graphical symbols; --- Part 3. painting and drawing number; --- Part 4. Dimensioning. This section GB/T 44476 Part of. This Part replaces GB/T 4476.4-1984 "metal hull Drawing Dimensioning." This section compared with the GB/T 4476.4-1984, mainly for the following changes. --- Added "Normative References" chapter; --- Added Dimension unit requirements; --- Increasing the size of the terminal in the form of lines; --- Modify the ball flat steel marked way; --- Clearly marked dimension figures; --- Removed Fig. This part is proposed by the China State Shipbuilding Corporation. This part of the National Standardization Technical Committee boat marine vessel basis points Technical Committee. This section drafted by. China Shipbuilding Technology and Economy Research Institute, China Shipbuilding Industry Corporation seventh Research Institute of ○. The main drafters of this section. Hung Jen Miao, Zhao Hua, Gao Feng, Wang Huaiyu. This part of the standard replaces the previous editions are. --- GB/T 4476.4-1984. Metal hull Drawing Part 4. Dimensioning

1 Scope

GB/T 4476 provisions of this part of the dimensioning method for a metal hull when drawing. This section applies to mapping civilian ships and military vessels auxiliary metal hull.

2 Normative references

The following documents contain provisions which, through reference to GB/T 4476 to the present, constitute provisions of this section. For dated references, All subsequent amendments (excluding corrections) or revisions do not apply to this section, however, encourage an agreement under this section Parties to study the latest versions of these documents. For undated reference documents, the latest versions apply to this section. CB/T 253 metal hull member theoretical line

3 General Provisions

3.1 magnitude hull members should note the size of the pattern on the basis of numbers, regardless of the accuracy of the size of graphics and drawings. 3.2 drawings and other technical documentation in size, when in millimeters, without marked unit of measurement, the use of other units should be specified Their units. 3.3 Location size hull structure should be marked member of theoretical line from the reference line (typically the baseline, the hull center line, vertical tail, etc.) distance. If the Does not comply with CB/T 253, available symbol "" indicates the position of the theoretical line of the member shown in Figure 1. Figure 1 3.4 the same size of the hull structure is generally marked only once, specifications, or the same size can be marked only a member. Size shall be marked in representation Member clearest map. Location Size 3.5 height direction usually the distance from the waterline to mark a baseline or the width direction from the use of the ship's hull or midline Distance mark, captain direction away from the use of the boat, from the station line or rib line labeled. 3.6 Pending size symbol "~" plus size figures marked.

4 dimension line

4.1 dimension lines drawn with a thin solid line, its end in one of two forms. ......

Image

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 4476.4-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 4476.4-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 4476.4-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 4476.4-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 4476.4-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4476.4-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.