Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 4476.1-2008 English PDF

Q: How long will the true-PDF of English version of GB/T 4476.1-2008 be delivered?

Upon your order, we will start to translate GB/T 4476.1-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Q: Can I share the purchased PDF of GB/T 4476.1-2008_English with my colleagues?

Yes. The purchased PDF of GB/T 4476.1-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Q: Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Q: Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Q: Should I purchase the latest version GB/T 4476.1-2008?

Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4476.1-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

US$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 4476.1-2008: Drawing for metal hull of ships -- Part 1: General provisions
Status: Valid

GB/T 4476.1: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 4476.1-2008	329	Add to Cart	3 days	Drawing for metal hull of ships -- Part 1: General provisions	Valid
GB/T 4476.1-1984	399	Add to Cart	3 days	Drawings for metal hull of ships--General provisions	Obsolete

Similar standards

GB/T 7094 CB 1146.8 CB 1146.9 GB/T 7727.5 GB/T 4476.4 GB/T 4476.2

Basic data

Standard ID: GB/T 4476.1-2008 (GB/T4476.1-2008)
Description (Translated English): Drawing for metal hull of ships -- Part 1: General provisions
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: U04
Classification of International Standard: 47.020
Word Count Estimation: 14,117
Date of Issue: 2008-10-20
Date of Implementation: 2009-04-01
Older Standard (superseded by this standard): GB/T 4476.1-1984
Quoted Standard: GB 3101; GB 3102; GB/T 13361; GB/T 16948; CB/T 3243.3
Regulation (derived from): National Standard Approval Announcement 2008 No.17 (Total No.130)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the terms involved in the metal hull to cartography, drawing format, drawings proportion, writing methods, graph types and so on. This section applies to drawing privateers and naval auxiliary vessels metal hull.

GB/T 4476.1-2008: Drawing for metal hull of ships -- Part 1: General provisions

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Drawing for metal hull of ships Part 1. General provisions ICS 47.020 U04 National Standards of People's Republic of China Replacing GB/T 4476.1-1984 Drawing metal hull - Part 1. General requirements Posted 2008-10-20 2009-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 4476 "Drawing metal hull" is divided into four parts. --- Part 1. General requirements; --- Part 2. Graphical symbols; --- Part 3. Representation of Drawings and number; --- Part 4. Dimensioning. This section GB/T 14476 Part of. This Part replaces GB/T 4476.1-1984 "metal hull drawings - General provisions." This section compared with the GB/T 4476.1-1984, mainly for the following changes. --- Modify the "hull center line," definitions "neutral surface", "Design waterline" and other terms; --- Chapter 4 revised 4.3, an increase of 4.4; --- Chapter 5 modified 5.1.1,5.2.2, an increase of 5.1.2; --- Revised Chapter 6; --- Chapter 7 increased 7.2; --- Increase the informative Appendix A "line of the application example." Appendix A of this section is an informative annex. This part is proposed by the China State Shipbuilding Corporation. This part of the National Standardization Technical Committee boat marine vessel basis points Technical Committee. This section drafted by. China Shipbuilding Technology and Economy Research Institute. The main drafters of this section. Hung Jen Miao, Zhao Hua, Gao Feng. This part of the standard replaces the previous editions are. --- GB/T 4476.1-1984. Drawing metal hull - Part 1. General requirements

1 Scope

This section GB/T 4476 specifies the terms metal hull Mapping involved, drawing format, pattern proportion, writing method, FIG. Line type and so on. This section applies to civilian vessels and naval auxiliary vessels drawing metal hull.

2 Normative references

The following documents contain provisions which, through reference to GB/T 4476 to the present, constitute provisions of this section. For dated references, All subsequent amendments (excluding corrections) or revisions do not apply to this section, however, encourage an agreement under this section Parties to study the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB 3101 general principles relating to amounts, units and symbols GB 3102 (all parts), Quantities and Units GB/T 13361 Technical Drawing generic term GB/T 16948 Technical product documentation - Vocabulary term projection (eqv ISO 10209-2.1993) CB/T 3243.3 ship product drawings and technical documents management - Part 3. basic format

3 Terms and Definitions

GB/T 13361 and GB/T 16948 and established the following terms and definitions apply to this section. 3.1 Fixed to the ship coordinate plane consisting of three orthogonal axes, namely the base plane, the midline of the face and the station side. 3.2 By the keel line and the intersection of the horizontal line of the station. 3.3 The hull symmetrical division, the base plane and perpendicular to the longitudinal plane. 3.4 The station, a transverse plane perpendicular to the substrate plane and neutral plane. 3.5 Deposit base line plane and the longitudinal plane or the transverse plane, perpendicular line measured baseline. Usually by the symbol "BL" she represents. 3.6 And the horizontal lines cross the midline plane or transverse plane. Usually by the symbol "CL" or expressed. 3.7 Hull shape of the design surface, that does not include the outer plate inner surface of the outer edge of the hull skeleton. ......

Image

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 4476.1-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 4476.1-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 4476.1-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 4476.1-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 4476.1-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4476.1-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.