GB/T 4310-2016 English PDFUS$119.00 ยท In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 4310-2016: Vanadium Status: Valid GB/T 4310: Historical versions
Basic dataStandard ID: GB/T 4310-2016 (GB/T4310-2016)Description (Translated English): Vanadium Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H63 Classification of International Standard: 77.150.99 Word Count Estimation: 6,677 Date of Issue: 2016-12-30 Date of Implementation: 2017-11-01 Older Standard (superseded by this standard): GB/T 4310-1984 Regulation (derived from): National Standard Notice No.27 of 2016 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 4310-2016: Vanadium---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Vanadium ICS 77.150.99 H63 National Standards of People's Republic of China Replacing GB/T 4310-1984 2016-12-30 release 2017-11-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released ForewordThis standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 4310-1984 "vanadium". Compared with GB/T 4310-1984, the main technical differences are as follows. --- increase the normative reference documents; --- increase the definition of margin; --- clear the chemical composition, particle size and appearance of the quality of the test method; --- batch approval in the batch requirements to expand to not more than 20kg; --- updated product packaging requirements; - Added the requirements for the contents of the order (or contract). This standard is proposed by China Nonferrous Metals Industry Association. This standard is owned by the National Committee for the Standardization of Nonferrous Metals (SAC/TC243). The drafting unit. Dalian Rongde Special Materials Co., Ltd., Xi'an Honghai Metal Materials Co., Ltd., Aohanhua Titanium Co., Ltd., Shangluo Amano high-tech materials limited liability company. The main drafters of this standard. Qiao Min, Sun Shiyan, Wang Fuli, Tian Shuming, Zhang Jiangfeng. This standard replaced the previous version of the standard release. --- GB/T 4310-1984. Vanadium 1 Scope This standard specifies the requirements for vanadium, test methods, inspection rules, signs, packaging, transportation, storage and quality certificates and orders (or Same) content. This standard applies to the melting salt electrolysis refining method of vanadium production. This product is used for superconducting materials, fast neutron reactor structural materials and special Alloy additives and so on.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. YS/T 540 (all parts) vanadium chemical analysis method3 request3.1 Product Classification According to the product impurity content is different, the product is divided into V-1, V-2, V-3 and V-4 four grades. 3.2 Chemical composition The chemical composition (mass fraction) of each grade product shall comply with the provisions of Table 1. Table 1 % Grade main ingredient not less than Impurity elements no greater than V Fe Cr Al Si CON V-1 Balance 0.005 0.006 0.005 0.004 0.01 0.025 0.006 V-2 Balance 0.02 0.02 0.01 0.004 0.02 0.035 0.01 V-3 99.5 0.10 0.10 0.05 0.05 - 0.08 - V-4 99.0 0.15 0.15 0.08 0.08 - 0.10 - Note 1. The balance is 100% minus the sum of the measured values in Table 1. Note 2. chemical composition has special requirements, determined by the supply and demand sides. 3.3 particle size 3.3.1 The product is granular and has a particle size range of not less than 0.25 mm, allowing a small amount of product beyond the particle size range, but its weight should not exceed Over 4.0%. 3.3.2 demand side if the product size of the special requirements, by the supply and demand sides to determine. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 4310-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 4310-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 4310-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 4310-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 4310-2016?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4310-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
