GB/T 43023-2023 English PDF

US$334.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 43023-2023: Guidelines for the measurement method of nonlinearity for surface acoustic wave(SAW) and bulk acoustic wave(BAW) devices in radio frequency(RF)
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 43023-2023	334	Add to Cart	3 days	Guidelines for the measurement method of nonlinearity for surface acoustic wave(SAW) and bulk acoustic wave(BAW) devices in radio frequency(RF)	Valid

Similar standards

GB/T 29197   GB/T 21711.1   GB/T 12274.401   GB/T 43024.2   

Basic data

Standard ID: GB/T 43023-2023 (GB/T43023-2023)
Description (Translated English): Guidelines for the measurement method of nonlinearity for surface acoustic wave(SAW) and bulk acoustic wave(BAW) devices in radio frequency(RF)
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: L21
Classification of International Standard: 31.140
Word Count Estimation: 18,163
Date of Issue: 2023-09-07
Date of Implementation: 2024-01-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 43023-2023: Guidelines for the measurement method of nonlinearity for surface acoustic wave(SAW) and bulk acoustic wave(BAW) devices in radio frequency(RF)

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 31.140 CCSL21 National Standards of People's Republic of China RF surface acoustic wave (SAW) devices and bulk acoustic waves Nonlinear Measurement Guidelines for (BAW) Devices (IEC 62761.2014,IDT) Published on 2023-09-07 2024-01-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee

Table of contents

PrefaceⅠ 1 Scope 1 2 Normative reference documents 1 3 Terms and Definitions 1 4 Basic characteristics of nonlinear systems 4 4.1 Nonlinear system characteristics 4 4.2 Nonlinear measuring device 6 4.3 Effect of circuit impedance on nonlinear measurement 9 4.4 Effect of circuit nonlinearity 11 5 Nonlinear measurements 11 5.1 Measuring instruments11 5.2 Measurement requirements 12 5.3 Measurement procedure 13 5.4 Report 14

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is equivalent to IEC 62761.2014 "Nonlinear Measurements of Radio Frequency Surface Acoustic Wave (SAW) Devices and Bulk Acoustic Wave (BAW) Devices" guide". This document has made the following minimal editorial changes. ---"OIP" in Figure 3 is corrected to "OIP2" based on the technical content of the context. Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This document is under the jurisdiction of the National Technical Committee on Standardization of Piezoelectric Devices for Frequency Control and Selection (SAC/TC182). This document was drafted by. China Electronics Technology Group Corporation No. 26 Research Institute, China Electronics Technology Tsing Huaying Electronics Co., Ltd., Shenzhen Maijie Microelectronics Co., Ltd., China Electronics Technology Standardization Institute. The main drafters of this document. Jiang Xin, Bei Weibin, Lai Dingquan, and Xue Chao. RF surface acoustic wave (SAW) devices and bulk acoustic waves Nonlinear Measurement Guidelines for (BAW) Devices

1 Scope

This document specifies radio frequency (RF) surface acoustic wave (SAW) devices and components used in communications, measuring instruments, radar systems, and consumer electronics products. Measurement method of nonlinear signals of acoustic wave (BAW) devices (such as filters, duplexers, etc.). This document includes the basic characteristics and measurement guidelines of nonlinearity, and is suitable for the establishment and corresponding measurement system of RF SAW/BAW devices. Development of measurement procedures. The purpose of this document is not to explain theory, nor to attempt to cover all possible situations that may arise in actual environments. It is intended to enable users to prepare for new Application Note some more basic issues before ordering RF SAW/BAW devices to ensure that users get satisfactory device performance.

2 Normative reference documents

This document has no normative references.

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 General terminology 3.1.1 Antenna duplexer composed of radio frequency bulk acoustic wave resonators. 3.1.2 Filters characterized by bulk acoustic waves. Bulk acoustic waves are usually generated by a pair of electrodes and propagate along the thickness direction. 3.1.3 bulkacousticwavebulkacousticwave;BAW A sound wave that travels along the upper and lower surfaces of a piezoelectric material and through the entire thickness of the piezoelectric body. Note. This sound wave is excited by metal electrodes made on the upper and lower surfaces of the piezoelectric layer. 3.1.4 cut-offfrequency The relative attenuation value reaches the passband frequency corresponding to the specified amplitude value. 3.1.5 duplexer duplexer A device used in frequency division duplex systems that enables the system to send and receive signals simultaneously through a common antenna. 3.1.6 It consists of a piezoelectric layer sandwiched between two electrode layers. The top and bottom electrodes have no stress on their surfaces, and the bottom consists of a cavity or cavity as shown in Figure 1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 43023-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 43023-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 43023-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 43023-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.