GB/T 42607-2023 English PDF

US$624.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 42607-2023: Powered hand-held hedge trimmers - Safety
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 42607-2023	624	Add to Cart	6 days	Powered hand-held hedge trimmers - Safety	Valid

Similar standards

GB 10395.1   GB 16151.1   GB 10395.6   GB/T 45297   GB/T 42608   

Basic data

Standard ID: GB/T 42607-2023 (GB/T42607-2023)
Description (Translated English): Powered hand-held hedge trimmers - Safety
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: B90
Classification of International Standard: 65.060.70
Word Count Estimation: 33,317
Date of Issue: 2023-05-23
Date of Implementation: 2023-12-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 42607-2023: Powered hand-held hedge trimmers - Safety

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 65:060:70 CCSB90 National Standards of People's Republic of China Powered Handheld Hedge Trimmer Safety (ISO 10517:2019, IDT) Released on 2023-05-23 2023-12-01 Implementation State Administration for Market Regulation Released by the National Standardization Management Committee

table of contents

Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 List of major hazards 6 5 Inspection of safety requirements and/or safety measures 7 5:1 General requirements 7 5:2 Handle and cutting device 8 5:2:1 Handle 8 5:2:2 Hand protection 8 5:2:3 Handle strength10 5:2:4 Cutting devices and guards 11 5:2:5 Shoulder strap requirements 13 5:2:6 Holding torque 14 5:2:7 Knife braking time 15 5:2:8 Cutting device sheath 16 5:2:9 Cutting accessories 17 5:3 Starting and idling 17 5:4 Control device 17 5:4:1 Flag 17 5:4:2 Throttle control device 17 5:4:3 Engine shutdown device 17 5:5 Protection of power drive components 18 5:6 Thermal protection 18 5:6:1 General 18 5:6:2 Test equipment, test conditions and test methods 18 5:6:3 Test acceptance 18 5:7 Fuel tank 19 5:8 Engine exhaust 19 5:9 Electrical of the ignition system 19 5:9:1 General 19 5:9:2 Ignition circuit 19 5:9:3 Test method 19 5:9:4 Test acceptance 20 5:10 Vibration 20 5:10:1 Vibration reduction through design and protective measures 20 5:10:2 Reducing vibration by giving information 20 5:10:3 Vibration measurement 20 5:11 Noise 20 5:11:1 Reducing noise by design and presentation of information 20 5:11:2 Noise measurement 21 6 Usage Information 21 6:1 User Manual 21 6:2 Flags 21 6:3 Warning 22 6:4 Label test 22 6:4:1 Preparation of test samples and control samples 22 6:4:2 Wipe resistance test 22 6:4:3 Adhesion test 23 Appendix A (Informative) Safety Instructions 24 A:1 General 24 A:2 Safe operation rules 24 A:2:1 Training 24 A:2:2 Preparation 24 A:2:3 Operation 25 A:2:4 Maintenance and storage 25 Appendix B (informative) Safety signs, symbols and pictorial examples 26 B:1 General 26 B:2 Safety signs 26 Reference 28

foreword

This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting: This document is equivalent to ISO 10517:2019 "Safety of Powered Hand-Held Hedge Trimmers": Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by the State Forestry and Grassland Administration: This document is under the jurisdiction of the National Forestry Machinery Standardization Technical Committee (SAC/TC61): This document was drafted by: Shandong Huasheng Zhongtian Machinery Group Co:, Ltd:, National Forestry and Grassland Bureau Harbin Forestry Machinery Research Institute, Nanjing Chervon Technology Co:, Ltd:, Yongkang Maojin Garden Machinery Co:, Ltd:, Zhejiang Yate Electric Co:, Ltd:, Yongkang Weili Technology Co:, Ltd:, Zhejiang Pinier Technology Co:, Ltd:, Jinhua Shangpu Electric Co:, Ltd:, Jiangsu SUMEC Hardware Tools Co:, Ltd: Division, Baoshide Technology (China) Co:, Ltd: The main drafters of this document: Shao Yiqun, Yang Xuefeng, Gao Yang, Liu Jidong, Wang Qian, Zou Yongfeng, Ding Junfeng, Liu Fei, Li Feng, Zhu Daoqing, Lu Jiangfeng, Pei Yong, Ding Yucai, Hu Anguo: Powered Handheld Hedge Trimmer Safety

1 Scope

This document specifies the trimming of hedges and shrubs powered by an internal combustion engine and operated by one person with one or more linear reciprocating cutters: Safety technical requirements and test methods for design and structure of hand-held hedge trimmers (hereinafter referred to as "hedge trimmers"): This document also applies to split pole hedge trimmers and multifunction machines configured as hedge trimmers: This document gives methods for eliminating or reducing various hazards arising from the use of hedge trimmers, and specifies the safety requirements provided by the manufacturer: Information requirements for the full code of practice: This document gives important information about hedge trimmers when used as intended and under conditions of misuse reasonably foreseeable by the manufacturer: Major hazards, dangerous situations and events (see Chapter 4): This document does not apply to hedge trimmers with an engine displacement above 80cm3, nor does it apply to the hedge trimmers produced before the release of this document Hedge trimmer:

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document: GB/T 15706-2012 General Principles of Machinery Safety Design Risk Assessment and Risk Reduction (ISO 12100:2010, IDT) GB/T 16842-2016 Test tools for testing the protection of human and equipment by enclosures (IEC 61032:1997, IDT) GB/T 23821-2009 Safety distance of machinery to prevent upper and lower limbs from touching the danger zone (ISO 13857:2008, IDT) ISO 3767-1 Symbols for operator controls and other indicating devices of agricultural and forestry tractors and machinery, lawn and garden power machinery Note: GB/T 4269:1-2000 Agricultural and forestry tractors and machinery, lawn and gardening power machinery Operator control mechanism and other symbols for display devices Part 1: General symbols (idtISO 3767-1:1991) ISO 3767-3 Symbols for operator controls and other indicating devices of agricultural and forestry tractors and machinery, lawn and garden power machinery Note: GB/T 4269:3-2000 Agricultural and forestry tractors and machinery, lawn and garden power machinery Operator control mechanism and other symbols for display devices Part 3: Symbols for lawn and garden power machinery (idtISO 3767-3:1995) ISO 3767-4 Symbols for operator controls and other indicating devices of agricultural and forestry tractors and machinery, lawn and garden power machinery rymachinery) Note: GB/T 4269:4-2014 Agricultural and forestry tractors and machinery, lawn and garden power machinery Operator control mechanism and other symbols for display devices Part 4: Symbols for forestry machinery (ISO 3767-4:1993, IDT) ISO 3864-2 Graphical symbols Safety colors and safety signs Part 2: Design principles for product safety labels (Graphical ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 42607-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 42607-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 42607-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 42607-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.