GB/T 4214.6-2008 English PDFUS$214.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 4214.6-2008: Household and similar electrical appliances -- Test code for the determination of airborne acoustical noise -- Particular requirements for electric hair care appliances Status: Valid
Basic dataStandard ID: GB/T 4214.6-2008 (GB/T4214.6-2008)Description (Translated English): Household and similar electrical appliances -- Test code for the determination of airborne acoustical noise -- Particular requirements for electric hair care appliances Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y64 Classification of International Standard: 97.170 Word Count Estimation: 11,191 Date of Issue: 2008-12-30 Date of Implementation: 2009-09-01 Adopted Standard: IEC 60704-2-9-2003, IDT Regulation (derived from): National Standard Approval Announcement 2008 No.26 (Total No.139) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard applies to household handheld hair dryer. These special requirements are also applicable to similar electrical device, such as using airflow generated by the fan hair styling device. Helmet Hair is not within the scope of this section. This section does not apply to hair care appliances with radiant heating. 1. 1. 2 Noise type instead: ISO 3743-1, ISO 3743-2 and ISO 3744 can be used to measure the noise emitted by hair dryer. 1. 1. 3 instead of the sound source dimension: ISO 3744 method is applicable to any predetermined size of a sound source (limited only by the available test environment). When using ISO 3743-1 and ISO 3743-2, it should be noted that the maximum size of the measured electrical hair care appliances to meet the requirements of ISO 3743-1: 1994 and ISO 3743-2: 1994 specified in 1. 3. 1. 2 Object increase: Requires declared noise emission values ??not within the scope of this section. Note: For product specifications to determine and verify the declared noise emission values, see IEC60704-3. 1. 3 Measurement Uncertainty instead: the valuation of the sound power level of the standard deviation determined in accordance with this section as follows: standard deviation/dB ��r (repeatability) ��R (reproducibility) 0. 4 0. 8 increase: 1. 101 declarations and verified by the standard deviation In order to follow the noise emission values ??of IEC 60704-3 Determination and verification of statements, the following values ??apply: standard deviation/dB ��P (production) ��t (Total) ��M (baseline). GB/T 4214.6-2008: Household and similar electrical appliances -- Test code for the determination of airborne acoustical noise -- Particular requirements for electric hair care appliances---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Household and similar electrical appliances Test code for the determination of airborne acoustical noise -. Particular requirements for electric hair care appliances ICS 97.170 Y64 National Standards of People's Republic of China GB/T 4214.6-2008/IEC 60704-2-9.2003 Household and similar electrical appliances noise test method Particular requirements for hair care appliances (IEC 60704-2-9.2003, IDT) Posted 2008-12-30 2009-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ Introduction Ⅳ 1 Scope and object 1 2 Normative references 2 3 Terms and definitions 2 4 measurement methods and the acoustic environment 2 5 measuring instruments 2 6 test run appliances and set-2 7 sound level measurements 3 8 Calculation of sound pressure level and sound power level 4 9 record content 4 Content report 10 4 Appendix 5 Appendix A (normative) Standard test station 5 GB/T 4214.6-2008/IEC 60704-2-9.2003ForewordGB/T 4214 "Household and similar electrical appliances noise test method" consists of several parts, Part 1 General Requirements, other parts Special requirements. This part of GB/T 64214 Part of. This is part of the special requirements of household and similar electrical appliances noise test method --- hair care appliances, identical with IEC 60704- 2-9.2003 "Household and similar electrical appliances noise test methods - Part 2-9. Particular requirements for hair care" (in English). For ease of use, this part of the IEC 60704-2-9.2003 made the following editorial changes. a) "the first part" be replaced by "GB/T 4214.1-2000"; b) with a decimal point '. 'Instead used as the decimal comma', '; c) Remove IEC foreword. This section should be GB/T 4214.1-2000 "Acoustics Household and similar electrical appliances noise test method - Part 1. General Requirements "used in conjunction. This part of the GB/T 4214.1-2000 relevant technical content were supplemented or modified. GB/T 4214.1 specific terms were not In this section mentioned, represent GB/T 4214.1 corresponding provisions applicable to this section. This section states that "applicable" part of the table 4214.1 shown in the corresponding provisions of GB/T apply to this section; this section states that "instead of" part, places the provisions of this section shall prevail; this Part states "addition" part indicates in addition to compliance with GB/T 4214.1 corresponding provisions, but also must comply with the provisions of this part of the increase. This part is proposed by the China National Light Industry Council. This part of the National Standardization Technical Committee appliances (SAC/TC46) centralized. This section is drafted. Guangzhou Electric Apparatus Research Institute, Flying Branch Group Co., Ltd., Guangzhou CVC Testing Institute. The main drafters of this section. Huang Wenxiu, Dong L, Zhong Zhigang. This section first release. GB/T 4214.6-2008/IEC 60704-2-9.2003IntroductionAs much as possible to simulate the actual use of hair care appliances at the same time, the provisions of this part of the measurement conditions in the measurement of noise and emission Measurement results obtained with relatively different laboratories provide sufficient accuracy. Recommended to (hair care appliances covering many aspects of properties and performance of) noise level measured consideration for a comprehensive test program section. Note. GB/T 4214.1-2000 in the introduction, this test method is only related to noise and air. GB/T 4214.6-2008/IEC 60704-2-9.2003 Household and similar electrical appliances noise test method Particular requirements for hair care appliances1 Scope and objectGB/T 4214.1-2000 This clause is applicable except as follows. 1.1 Scope 1.1.1 Overview instead. GB/T 4214 This section applies to household and similar purposes by the power grid and the use of air flow to work handheld hair dryer. These special requirements are also applicable to similar electric devices, such as the use of air flow generated by the fan hair styling device. Helmet Hair Dryer is not within the scope of this. This section does not apply to hair care appliances with radiant heating. 1.1.2 Types of noise instead. ISO 3743-1, ISO 3743-2 and ISO 3744 can be used for measuring noise emitted by hair dryer. Dimensions 1.1.3 sound source instead. The method as specified in ISO 3744 applies to any size of the sound source (limited only by the available test environment). When using ISO 3743-1 and ISO 3743-2, it should be noted that the maximum size of the measured electrical hair care appliances to meet ISO 3743-1.1994 and ISO 3743-2.1994 requirements in 1.3. 1.2 Object increase. Requires the declaration of noise emission values \u200b\u200bare not within the scope of this. Note. For product specifications to determine and verify the declared noise emission values, see IEC 60704-3. 1.3 Measurement Uncertainty instead. Accordance with the standards of sound power levels in this part of the determined deviation estimates as follows. Standard deviation/dB σr (repeatability) σR (reproducibility) 0.4 0.8 increase. 1.101 standard deviations declaration and verification purposes In order to verify and measured in accordance with IEC 60704-3 declared noise emission values, the following values \u200b\u200bapply. Standard deviation/dB σP (production) σt (total) σM (reference) 0.5 ~ 1.3 1.5 ~ 0.9 1.5 GB/T 4214.6-2008/IEC 60704-2-9.2003 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 4214.6-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 4214.6-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 4214.6-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 4214.6-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |