GB/T 41975-2022 English PDFUS$409.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 41975-2022: Ink-jet digital printing press for books and periodicals Status: Valid
Basic dataStandard ID: GB/T 41975-2022 (GB/T41975-2022)Description (Translated English): Ink-jet digital printing press for books and periodicals Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J87 Classification of International Standard: 37.100.10 Word Count Estimation: 22,267 Date of Issue: 2022-10-14 Date of Implementation: 2022-10-12 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 41975-2022: Ink-jet digital printing press for books and periodicals---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Ink-jet digital printing press for books and periodicals ICS 37.100.10 CCSJ87 National Standards of People's Republic of China Books and Periodicals Inkjet Digital Printing Press Published on 2022-10-12 2022-10-12 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Abbreviations 2 5 Equipment type, structure composition and basic parameters 2 5.1 Device Type 2 5.2 Structural composition 2 5.3 Basic parameters 2 6 Requirements 3 6.1 Mechanical properties 3 6.2 Printing performance 3 6.3 Cutting performance 5 6.4 Delivery performance 5 6.5 Digital prepress work system5 6.6 Paper path system 5 6.7 Inkjet printing unit 5 6.8 Drying (curing) unit 5 6.9 Safety of machinery 5 6.10 Electrical Quality 6 6.11 Appearance quality 6 7 Test method 6 7.1 Test conditions 6 7.2 Test material 6 7.3 Measuring instruments 7 7.4 Mechanical property test 7 7.5 Printing performance test 7 7.6 Cutting performance test 9 7.7 Delivery performance test 9 7.8 System check of digital prepress work9 7.9 Paper path system inspection 9 7.10 Inkjet Printing Unit Inspection 9 7.11 Drying (curing) unit inspection 9 7.12 Mechanical safety inspection 9 7.13 Electrical Quality Test 9 7.14 Appearance quality inspection 9 8 Inspection Rules 9 8.1 Factory inspection9 8.2 Type inspection 10 9 Instructions for use, product certificates, signs and signs 10 10 Packaging, transport and storage 11 10.1 Packaging 11 10.2 Transport 11 10.3 Storage 11 Appendix A (Informative) Standard Test Chart 12 A.1 Test Chart Elements 12 A.2 Composition of the test chart 12 A.3 Printing proofs 13 A.4 Description of Test Chart Elements 13 Appendix B (Informative) Noise Measurement Point Locations 15 Reference 16 Figure A.1 Schematic diagram of the location of the elements of the test chart (Drawing I) 12 Figure A.2 Printing proof (pattern I, color) 13 Figure B.1 Schematic diagram of measuring point location 15 Table 1 Basic parameters3 Table 2 Noise Limits3 Table 3 Density values of each measuring point in the solid color bar area4 Table 4 The allowable error of the density value of the solid color bar 4 Table 5 Dot enlargement ratio of step scale ruler4 Table 6 Appearance Quality Requirements 6 Table 7 Factory inspection items 10 Table 8 Requirements for various types of signs11 forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Printing Machinery Standardization Technical Committee (SAC/TC192). This document is drafted by. Beijing Peking University Founder Electronics Co., Ltd., Shenzhen Yutong Packaging Technology Co., Ltd., Shandong Yingke Jiesu Code Technology Co., Ltd., Beijing Zhiyi Zhonghe Technology Co., Ltd., Henan Xinhua Printing Group Co., Ltd., Tai'an Yijie Digital Printing Co., Ltd. Company, Ricoh (China) Investment Co., Ltd., Tiankewei Intelligent Technology (Guangdong) Co., Ltd., Spender Packaging and Printing Technology Development (Beijing) Co., Ltd., Hebei Wanjie Machinery Technology Co., Ltd., Canon (China) Co., Ltd., Shenzhen Shengde Jingyue Technology Co., Ltd., Hangzhou East Xin Optoelectronics Technology Co., Ltd., Guangzhou Qiancai Paper Printing Co., Ltd., Fujifilm (China) Investment Co., Ltd., Zhejiang Weigang Technology Co., Ltd. Co., Ltd., Beiren Intelligent Equipment Technology Co., Ltd., Shanghai Toyo Ink Manufacturing Co., Ltd., Shenzhen Moku Graphic Technology Co., Ltd., Shanghai Ruierfa Digital Technology Co., Ltd., Shandong Yuzhiguo Digital Technology Co., Ltd., Ruian Chuangbo Machinery Co., Ltd., Shenzhen Vocational Technology Co., Ltd. Institute of Technology, Guangdong Dongguan Quality and Technical Supervision Standards and Coding Institute, Guangzhou Tiansheng Printing Co., Ltd., Tianjin Vocational University, Hangzhou Electric Power Co., Ltd. Sub-University of Science and Technology, Printing Industry (Qingdao) Internet Technology Co., Ltd., Konica Minolta Office System (China) Co., Ltd., Peking University, China Institute of Printing Science and Technology Co., Ltd. The main drafters of this document. Wen Xiaohui, Yang Junchang, Liang Yongjun, Yu Zhiguo, Dong Ying, Tian Jing, Zhang Weiyuan, Shen Yanwei, Liu Peng, Xu Guihua, Wang Jian, Xie Hongyin, Sun Shanguang, Zhang Jingyong, Hu Yongjie, Ni Xiaohui, Zhang Jing, Ye Ming, Xie Fenghua, Shen Jun, Shen Wei, Shen Zhehao, Feng Xugao, Yu Jie, Li Dan, He Yijun, Che Wenchun, Yu Jinhua, Wang Tianxi, Liang Juanli, Cui Lianhua, Ming Yaqiang, Xie Yonglin, Wang Qiang, Zhao Yongguang, Li Xia, Zhang Zhengxiu, Luo Ruiqiu, Peng Liangsheng, Su Xiaoyan, Zhou Jingfu, Wu Qiong, Chen Yongcheng, Dai Junping, Zheng Mengjun, Lan Yujing, Yang Qian, Peng Ming. Books and Periodicals Inkjet Digital Printing Press1 ScopeThis document specifies the abbreviations, equipment types, structural composition, basic parameters, requirements, test methods, inspections of digital inkjet printing presses for books and periodicals Rules, instructions for use, product certificates, signs and signs, as well as packaging, transportation, and storage. This document applies to the design, development, manufacture and use of inkjet digital printing presses for books and periodicals.2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 191 Graphical signs of packaging, storage and transportation GB 2894 Safety Signs and Guidelines for their Use GB/T 3785.1 Electroacoustic Sound Level Meter Part 1.Specification GB/T 4728.1-2018 Graphical symbols for electrical diagrams - Part 1.General requirements GB/T 4879 Antirust Packaging GB/T 5226.1-2019 Mechanical and Electrical Safety Mechanical and Electrical Equipment Part 1.General Specifications GB/T 6388 Receipt and Delivery Marks for Transport Packaging GB/T 8196-2018 General requirements for the design and manufacture of fixed and movable guards for mechanical safety guards GB/T 9969 General Principles of Instruction Manual for Industrial Products GB/T 12265-2021 Minimum distance for mechanical safety to prevent extrusion of human body parts GB/T 13306 Signs GB/T 13384 General technical conditions for packaging of mechanical and electrical products GB/T 14436 General Principles of Warranty Documents for Industrial Products GB/T 16754-2021 Design principles of mechanical safety emergency stop function GB/T 19436.1-2013 Electrical and Mechanical Safety Electro-sensitive Protective Equipment Part 1.General Requirements and Tests GB/T 23649-2009 Optical, geometric and metrological requirements for reflection densitometers for printing technology process control printing GB/T 28387.1-2012 Design and Structural Safety Rules for Printing Machinery and Paper Processing Machinery Part 1.General Requirements GB/T 36062-2018 Use requirements and inspection methods of digital printing systems3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 digitalprintingpress According to the input digital file, it is a device that digitally transfers the colorant/colorant (such as ink) to the substrate for direct imaging. [Source. JB/T 4178-2016, 9.1, with modifications] ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 41975-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 41975-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 41975-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41975-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
