GB/T 40926.3-2021 English PDFUS$504.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 40926.3-2021: Protective equipment for use in ice hockey - Part 3: Face protectors for skaters Status: Valid
Basic dataStandard ID: GB/T 40926.3-2021 (GB/T40926.3-2021)Description (Translated English): Protective equipment for use in ice hockey - Part 3: Face protectors for skaters Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y55 Word Count Estimation: 29,274 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 40926.3-2021: Protective equipment for use in ice hockey - Part 3: Face protectors for skaters---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Protective equipment for use in ice hockey.Part 3.Face protectors for skaters ICS 13.340.20;97.220.20 CCSY55 National Standards of People's Republic of China Ice hockey protective gear Part 3.Facial Protector (ISO 10256-3.2016, IDT) Released on 2021-11-26 2021-11-26 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee Table of contentsForeword Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Classification of facial protective gear 5 5 Requirements 5 5.1 Harmlessness 5 5.2 Ergonomics 5 5.3 Assembly 5 5.4 Size and quality restrictions (B2 type only) 5 5.5 Optical performance 5 5.6 Vision 6 5.7 Penetration resistance (test blade) performance 6 5.8 Resistance to ice hockey impact 6 5.9 Design Check 7 5.10 Protected area 7 6 Test method 8 6.1 Sampling 8 6.2 Dimensional deviation 8 6.3 Quality inspection (for helmet/B2 face protector combinations suitable for EN960.2006 headform size 535 or smaller) 8 6.4 Pre-test treatment of samples 8 6.5 Positioning 8 6.6 Determination of the visual quality of facial protective gear 9 6.7 Penetration resistance test 9 6.8 Ice hockey impact test---face protection 10 7 Test report 11 8 Permanent identification 11 9 Product information 11 Appendix A (normative) Optical performance test method 18 Appendix B (normative) Ice hockey specifications 23 References 24ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is the third part of GB/T 40926 "Ice Hockey Protective Gear". GB/T 40926 has released the following parts. ---Part 1.General requirements; ---Part 2.Head Protector; ---Part 3.Facial protective gear; ---Part 4.Goalkeeper's head and face protection; ---Part 5.Neck protector. This document is equivalent to ISO 10256-3.2016 "Ice Hockey Protective Gear Part 3.Skater's Facial Protective Gear". This document has made the following minimal editorial changes. --- Modify the term definition of 3.4 parallel light source to "a light source whose light beam will not disperse with distance."; --- Amend "Note. see definition in 5.9.1." in 3.7.1 to "Note. see definition of Type B1 and Type B2 in Chapter 4."; --- Change "Note. see 5.9.2 definition." in 3.7.2 to "Note. see Chapter 4 Type C definition."; --- Modify the "facial feature head mold K point" in 5.9.1.1 to "facial feature head mold g point"; --- Modify the "facial feature head model K point" in 5.9.2.1 to "facial feature head model g point"; ---Add "As shown in Figure 7." in 6.8.1.2; --- Amend "D1 D2/2" in Note 1 of A.6.3 to "(D1 D2)/2"; --- Modify "D1 D2" in Note 2 of A.6.3 to "|D1-D2|". Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents. This document was proposed and managed by the China National Light Industry Council. Drafting organizations of this document. Ningbo Tianqi Technology Co., Ltd., China Test Testing and Certification Group Co., Ltd., China Culture, Education and Sporting Goods Association Meeting, Qiqihar Heilong International Ice and Snow Equipment Co., Ltd., Zhaoqing Bohan Sporting Goods Co., Ltd. The main drafters of this document. Wang Hanliang, Liu Wenqiu, Hao Peng, Li Mingyang, Zhang Ming, Zhou Jinhua.IntroductionThe establishment of the ice hockey protective gear standard is to establish a set of best evaluation criteria for References are provided in the selection of production materials, product design, and precautions required for product production and sales. The purpose of GB/T 40926 is to establish The materials, design, test methods and other aspects of ice hockey protective gear are to be composed of six parts. ---Part 1.General requirements. The purpose is to establish the general rules applicable to the production and testing of various types of ice hockey protective gear. Principles and related rules. ---Part 2.Head protection. The purpose is to establish that it is suitable for the production and testing of head guards in all kinds of ice hockey sports protective gear. The general principles and related rules to be observed. ---Part 3.Facial protective gear. The purpose is to establish that it is suitable for the production and testing of facial protective gear in all kinds of ice hockey sports protective gear. The general principles and related rules to be observed. ---Part 4.Goalkeeper's head and face protection. The purpose is to establish a goalie head suitable for all types of ice hockey protective gear The general principles and related rules that need to be followed in the production and testing of department and face protection products. ---Part 5.Neck protector. The purpose is to establish that it is suitable for the production and testing of neck protective gear in all kinds of ice hockey sports protective gear. The general principles and related rules to be observed. ---Part 6.Calf protector. The purpose is to establish the requirements for the production and testing of middle and calf protective gear suitable for all kinds of ice hockey sports protective gear. The general principles and related rules to be observed. GB/T 40926 clarifies the type classification of ice hockey protective gear through six parts, and clarifies the relevant elements and rules. By establishing The clear scope, terminology, requirements, test methods, etc. of various types of ice hockey protective gear, so that producers, users and test-related personnel can better Operate clearly and accurately to design and manufacture high-quality ice hockey protective gear to better promote trade, communication and technical cooperation. The purpose of the face protector specified in this document is to reduce the frequency and severity of injuries to the part of the head and face surrounded by the protector. And buffer the force of the impact protector, and offset the penetration of objects. Facial protective gear may include goggles (face mask) or full face mask. They are always with Wear ice hockey helmets together. The face protector is tested and evaluated together with the expected helmet or helmets. In order to achieve its performance, and make sure To ensure the stability of the head, the helmet and related facial protective gear are designed to fit as closely as possible and remain comfortable. Need to connect the head firmly when in use Helmets and related facial protectors, and adjust the wearing system according to the manufacturer’s instructions. Ice hockey protective gear Part 3.Facial Protector1 ScopeThis document, combined with GB/T 40926.1-2021, specifies the performance requirements and tests for face protectors (including masks) in ice hockey. method. The reasonable performance confirmed in this document is as follows. a) Structure and coverage area; b) Resistance to ice hockey impact; c) Penetration resistance; d) Field of view; e) Geometric (visual) optical performance and acuity; f) Transmittance and haze; g) Identification and information. This document applies to facial protective gear worn by the following persons. --- Hockey players other than goalkeepers; ---Relevant staff (such as referees). Note 1.The requirements of the clause take precedence over the graphics. Note 2.The purpose of this document is to reduce the risk of injury to the athlete's face without compromising the competitive state and appeal of ice hockey.2 Normative referencesThe content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to This document. GB/T 40926.1-2021 Ice hockey protective gear Part 1.General requirements (ISO 10256-1.2016, IDT) GB/T 40926.2-2021 Ice hockey protective gear Part 2.Head protective gear (ISO 10256-2.2016, IDT) ASTMD1003 Standard Test Method for Haze and Transmittance of Transparent Plastics (StandardTestMethodforHazeandLu- minousTransmittanceofTransparentPlastics) CSAZ262.6 Specifications for Facialy Featured Headform (Specifications for Facialy Featured Headform) EN960 Headforms for use in the testing of protective helmets3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 CIE standard light source CIEstandardiluminants CIE defines light sources A and D65 based on the relative spectral power distribution. Note. See ISO 11664-2 prepared by the International Commission on Illumination (CIE). ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 40926.3-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 40926.3-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 40926.3-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 40926.3-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
