GB/T 40742.5-2021 English PDF

US$499.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 40742.5-2021: Geometrical product specifications (GPS) - Geometrical precision verification - Part 5: Estimation of uncertainty of measurement for geometrical characteristics verification
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 40742.5-2021	499	Add to Cart	5 days	Geometrical product specifications (GPS) - Geometrical precision verification - Part 5: Estimation of uncertainty of measurement for geometrical characteristics verification	Valid

Similar standards

GB/T 40742.1   GB/T 40742.3   GB/T 26093   GB/T 33523.73   GB/T 45683   GB/T 40742.2   

Basic data

Standard ID: GB/T 40742.5-2021 (GB/T40742.5-2021)
Description (Translated English): Geometrical product specifications (GPS) - Geometrical precision verification - Part 5: Estimation of uncertainty of measurement for geometrical characteristics verification
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J42
Word Count Estimation: 27,263
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 40742.5-2021: Geometrical product specifications (GPS) - Geometrical precision verification - Part 5: Estimation of uncertainty of measurement for geometrical characteristics verification

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Geometrical product specifications (GPS) - Geometrical precision verification - Part 5.Estimation of uncertainty of measurement for geometrical characteristics verification ICS 17.040.40 CCSJ42 National Standards of People's Republic of China Product Geometric Technical Specification (GPS) Detection and verification of geometric accuracy Part 5.Geometric feature detection and verification Evaluation of measurement uncertainty Released on 2021-10-11 and implemented on 2022-05-01 State Administration for Market Regulation Issued by the National Standardization Management Committee

Table of contents

Foreword Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Sources of measurement uncertainty factors 2 5 Maximum allowable value of measurement uncertainty 2 6 Uncertainty Judgment Criteria in Geometric Feature Detection and Verification 3 7 Measurement uncertainty management for a given measurement process 3 8 Uncertainty management for the design and development of the measurement process (program) 4 9 Protocol guidelines for the expression of measurement uncertainty 4 10 About arbitration 4 Appendix A (informative) Influencing factors and evaluation principles of standard uncertainty in geometric feature testing and verification 5 Appendix B (Informative) Example of Evaluation of Measurement Uncertainty in Dimensional Inspection and Verification 10 Appendix C (informative) Example of evaluation of measurement uncertainty in form error detection and verification 17 Appendix D (informative) Relationship with GPS matrix model 22 Reference 23

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is the fifth part of GB/T 40742 "Geometric Technical Specifications for Products (GPS) Geometric Accuracy Testing and Verification". GB/T 40742 has released the following parts. ---Part 1.Basic concepts and measurement basic symbols, terminology, measurement conditions and procedures; ---Part 2.Detection and verification of shape, direction, position, runout and profile features; ---Part 3.Testing and verification of functional gauges and fixtures when applying the largest and smallest physical requirements; ---Part 4.Size and geometric error evaluation, minimum area discrimination mode; ---Part 5.Evaluation of measurement uncertainty in geometric feature detection and verification. This document was proposed and managed by the National Standardization Technical Committee for Product Geometric Technical Specifications (SAC/TC240). Drafting organizations of this document. Shanghai Institute of Metrology and Testing Technology, China Jiliang University, Jiangsu Ruijing Optoelectronics Research Institute Co., Ltd., China Machinery Productivity Promotion Center, Shaanxi Well Mechanical and Electrical Technology Co., Ltd., China Machinery (Beijing) Vehicle Inspection Engineering Research Institute Co., Ltd., Zhengzhou University, China Machinery Research Institute of Standard Technology (Beijing) Co., Ltd. The main drafters of this document. Zeng Yanhua, Kong Ming, Chen Gang, Zhu Yue, Ming Chongnian, Zhang Wenjian, Fan Houjie, Fang Dongyang.

Introduction

In the production process, the digital measurement and control method for the geometric accuracy of the product size, shape, direction, position, etc. is imperfect, and the geometric accuracy is counted. Key issues such as the lack of characterization inspection methods and measurement uncertainty evaluation methods, and the passive backwardness of process quality accuracy measurement and control methods. The digital measurement theory, method and technology of product geometric accuracy, and build a geometric accuracy inspection operation specification system and control system in line with the new generation of GPS. System strategy. GB/T 40742 "Geometrical Technical Specifications for Products (GPS) Detection and Verification of Geometric Accuracy" is based on the new generation of GPS product geometrical specifications. Model system, using digital online measurement technology, statistical learning and analysis theory, advanced manufacturing technology, system integration and management technology, etc., through Theoretical analysis, model mapping and simulation/experimental verification are the recommended national standards for geometric accuracy testing and verification. The standard is based on the proposed inspection operator specification, and analyzes the measurement equipment, measurement methods, measurement principles and measurement involved in the actual measurement process. Influencing factors such as measurement conditions, the uncertainty composition and transmission law of the elements in the extraction, filtering, and fitting operations are given, and the uncertainty is established. Degree evaluation model. Through the online collection of product quality parameters, data processing and system evaluation in the production process, it effectively solves the problem of Data extraction, error separation, fitting evaluation, quality analysis and other operations and process accuracy control of digital measurement of quality accuracy in the production process Fan unification problem. GB/T 40742 is mainly used to standardize key element operations and standard strategies, and establish corresponding geometric accuracy inspection operation models and inspections Operators provide technical support for the analysis and improvement of product production quality. For the convenience of readers, the standard is divided into 5 parts. Compiled, the five parts are interrelated and independent, which together constitute the content of geometric accuracy detection and verification. GB/T 40742 is composed of 5 parts. ---Part 1.Basic concepts and measurement basic symbols, terminology, measurement conditions and procedures. Provisions for geometric accuracy testing and verification The basic concepts, measurement basis, terminology, symbols, measurement conditions and measurement procedures of the ---Part 2.Detection and verification of shape, direction, position, runout and profile features. Prescribes the shape, direction, position, and runout And the general provisions of profile detection and verification, inspection operation set, measurement uncertainty evaluation and conformity assessment, etc. ---Part 3.Testing and verification of functional gauges and fixtures when applying the largest and smallest physical requirements. Stipulates that The general requirements for the testing and verification process with the largest and smallest physical requirements and the general requirements for the design of testing fixtures. ---Part 4.Size and geometric error evaluation, the smallest area of the discriminant model. It specifies the dimensional acceptance and the evaluation operation of geometric error do. For different target tasks (offline, online inspection), the product size conformity assessment and geometric error assessment methods are given And related default principles and the minimum area discrimination method for shape error, direction error, and position error. ---Part 5.Evaluation of measurement uncertainty in geometric feature detection and verification. Specifies the uncertainty evaluation of measurement results operate. Provides an evaluation method for the uncertainty of the product size and geometric tolerance detection and verification process, and gives the basis The application specification of the Uncertainty Management Program (PUMA) for the optimization of the inspection and verification process. Product Geometric Technical Specification (GPS) Detection and verification of geometric accuracy Part 5.Geometric feature detection and verification Evaluation of measurement uncertainty

1 Scope

This document specifies the operation of the uncertainty evaluation of the measurement results. Provides a testing and verification process for product dimensions and geometric tolerances The evaluation method of medium uncertainty gives an application specification for optimizing the inspection and verification process according to the Uncertainty Management Program (PUMA). This document is applicable to the detection and verification of geometric features such as the size, shape, direction, and position of geometric products.

2 Normative references

The content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to This document. GB/T 1958-2017 Product Geometric Technical Specification (GPS) Geometric Tolerance Testing and Verification GB/T 18779.1 Geometric Technical Specifications for Products (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 1.Inspection According to Specifications Qualified or unqualified rules GB/T 18779.2 Product Geometrical Quantity Technical Specification (GPS) Measurement Inspection of Workpiece and Measuring Equipment Part 2.Measuring Equipment Guidelines for Evaluation of Uncertainty of GPS Measurements in Calibration and Product Inspection GB/T 18779.3 Geometric Technical Specifications for Products (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 3.About the Measurement Guidelines for reaching consensus on the expression of uncertainty GB/T 18779.6 Product Geometric Technical Specification (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 6.Instruments and Workpieces General rules for acceptance/rejection JJF1001 General measurement terms and definitions JJF1059.1 Evaluation and Expression of Uncertainty in Measurement

3 Terms and definitions

GB/T 1958, GB/T 18779.1, GB/T 18779.2, GB/T 18779.3, GB/T 18779.6, JJF1001 and JJF1059.1 The defined and the following terms and definitions apply to this document. 3.1 Measuringtask The quantitative determination of the measured according to the definition. [Source. GB/T 18779.2-2004,3.3] 3.2 (Measured or calibrated) target uncertainty targetuncertainty (forameasurementorcalibration) UT The uncertainty determined to be optimized for a given measurement task. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 40742.5-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 40742.5-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 40742.5-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 40742.5-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.