GB/T 40338-2021 English PDF

US$439.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 40338-2021: Corrosion of metals and alloys - Exfoliation corrosion testing of aluminium alloys
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 40338-2021	439	Add to Cart	5 days	Corrosion of metals and alloys - Exfoliation corrosion testing of aluminium alloys	Valid

Similar standards

GB/T 41653   GB/T 40299   GB/T 40393   GB/T 20854   GB/T 40339   

Basic data

Standard ID: GB/T 40338-2021 (GB/T40338-2021)
Description (Translated English): Corrosion of metals and alloys - Exfoliation corrosion testing of aluminium alloys
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H25
Word Count Estimation: 22,269
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 40338-2021: Corrosion of metals and alloys - Exfoliation corrosion testing of aluminium alloys

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Corrosion of metals and alloys - Exfoliation corrosion testing of aluminium alloys ICS 77.060 CCSH25 National Standards of People's Republic of China Corrosion of metals and alloys Aluminum alloy spalling corrosion test (ISO 11881.1999, MOD) Released on 2021-08-20 2022-03-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document uses the redrafting method to modify and adopt ISO 11881.1999 "Corrosion of metals and alloys, aluminum alloy exfoliation corrosion test". Compared with ISO 11881.1999, this document has structural adjustments. a) In Chapter 1, adjust the "Warning" to the front of the text, merge 1.1 and 1.2, merge 1.4 and 1.5, and at the same time Change to paragraph; b) In Chapter 6, 6.8 was deleted, and the original 6.9 was adjusted to 6.8; c) Add the number and title "10.1.1 Overview" to the suspended paragraph in Chapter 10, and adjust the original order of 10.1.1 and 10.1.2 to 10.1.2, 10.1.3; d) Adjust the corrosion types and corrosion levels given in 10.1.2 "Procedure A" to Table 3; e) Add the number and title "10.1.2.1 Corrosion Type and Grade" to the suspension section in 10.1.2, and adjust the order of 10.1.1.1 and 10.1.1.2 The whole number is 10.1.2.2, 10.1.2.3; f) Add the number "10.1.2.3.1" to the 10.1.2.3 suspension section, and adjust the order of the original 10.1.1.2.1~10.1.1.2.3 to 10.1.2.3.2~ 10.1.2.3.4; g) Adjust the corrosion topography in Figure 2 to Figure 6 from side layout to horizontal layout; h) Add "Note 2" to the detailed description of different pitting corrosion (level P) degrees in 10.1.2.2; i) Adjust the peeling grade of 10.2 "Procedure B" from Table 3 to Table 4 of this document; adjust "Note 5" in Table 3 to the positive value before Table 4. In the text, the original Note 6 and Note 7 are adjusted to Note 5 and Note 6; j) Delete "d) Sampling procedure and parallel sample quantity information" in Chapter 12, and adjust the serial numbers e)~h) to d)~g) in turn; k) Appendix A (informative) "Technical differences between this document and ISO 11881.1999 and their reasons" has been added. Adjust the original Appendix A The whole is Appendix B. Compared with ISO 11881.1999, this document has technical differences. The set vertical single line (|) is marked, and Appendix A gives a list of the corresponding technical differences and their reasons. This document is incorporated into the technical amendment ISO 11881.1999/Cor.1.1999(E) issued by the ISO /TC156 Technical Committee. The terms involved in these amendments have been marked by a vertical double line (||) on the outer margins. Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents. This document was proposed by the China Iron and Steel Association. This document is under the jurisdiction of the National Steel Standardization Technical Committee (SAC/TC183). Drafting organizations of this document. The 59th Research Institute of China Ordnance Industry, Metallurgical Industry Information Standards Research Institute, CRRC Qingdao Sifang Locomotive and Rolling Stock Co., Ltd., Institute of Metal Research, Chinese Academy of Sciences, University of Science and Technology Beijing. The main drafters of this document. Wen Bangwei, Hou Jie, Sun Xiaoguang, Wang Zhenyao, Tian Zijian, Yang Xiaokui, Li Xiaogang, Tian Honglei, Dong Chaofang, Zhang Kai, Sun Menghan. Corrosion of metals and alloys Aluminum alloy spalling corrosion test Warning. This document may involve hazardous materials, operations and equipment. This document is not intended to solve all safety issues related to its use. question. The user of this document is responsible for prescribing appropriate safety and health training and prescribing the scope of application of the restrictions before use.

1 Scope

This document specifies the test principle, effectiveness, interference, and test of the full-immersion accelerated spalling corrosion of aluminum alloys in the process of R&D and quality control. Sample, test solution, test device, test procedure, result evaluation, factors affecting reproducibility and test report. This document applies to rolling semi-finished deformed aluminum alloys, parts produced by conventional casting metallurgical processes and powder metallurgy processes, and mechanical bonding. Test of aluminum-based composite materials produced by Jinhua. This document is also applicable to aluminum ingots and cast aluminum alloys with oriented structures such as columnar grains or strip segregation. Use this document to obtain The obtained test results are mainly suitable for studying the tendency of exfoliation corrosion in alloy research and development, and are not suitable for the absolute criterion of exfoliation corrosion resistance. When the test is used for the production control of spalling corrosion-resistant materials, the relevant parties shall negotiate on the qualified performance indicators.

2 Normative references

The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to This document. GB/T 6682-2008 Analytical laboratory water specifications and test methods (ISO 3696.1987, MOD) GB/T 36174-2018 Corrosion of metals and alloys Determination of intergranular corrosion resistance of solution heat treatment aluminum alloys (ISO 11846. 1995, IDT) ISO 8044 Corrosion of metals and alloys (Corrosionofmetalsandaloys-Vocabulary)

3 Terms and definitions

The following terms and definitions defined in ISO 8044 apply to this document. 3.1 Exfoliation corrosion Products rolled from a deformed alloy with a highly oriented grain structure are susceptible to sub-layer stress corrosion to form delamination, accompanied by the material body The delamination is separated, cracks are formed, and finally lead to complete interlayer separation of the metal. Note. The spalling usually develops along the grain boundary, but after tempering in some alloys, it may develop along the trans-crystalline path or along the grain/trans-crystalline mixed path.

4 Principle

4.1 The sample is fully immersed in an aqueous solution of the specified composition and temperature, suitable for short-period tests determined according to the alloy type and corrosion solution. 4.2 Use visual inspection to qualitatively assess the relative sensitivity to spalling corrosion, and at the same time refer to the standard map or spalling level to determine the performance level. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 40338-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 40338-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 40338-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 40338-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.