GB/T 40302-2021 English PDF

US$264.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 40302-2021: Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 40302-2021	264	Add to Cart	3 days	Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source	Valid

Similar standards

GB/T 39827.1   GB/T 39715.1   GB/T 40318   GB/T 18964.1   GB/T 12008.7   

Basic data

Standard ID: GB/T 40302-2021 (GB/T40302-2021)
Description (Translated English): Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G31
Word Count Estimation: 14,158
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 40302-2021: Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source ICS 83.080.01 CCSG31 National Standards of People's Republic of China Plastic vertical soft and thin specimens in contact with a small flame source Combustion performance measurement (ISO 9773.1998, IDT) Released on 2021-08-20 2022-03-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. The translation method used in this document is equivalent to ISO 9773.1998 "Testing the combustion performance of plastic vertical soft and thin specimens in contact with a small flame source. Certainly". The Chinese documents that have consistent correspondence with the normatively cited international documents in this document are as follows. ---GB/T 1844.1-2008 Plastic symbols and abbreviations Part 1.Basic polymers and their characteristic properties (ISO 1043-1.2001, IDT); ---GB/T 2918-2018 Plastic specimen condition adjustment and test standard environment (ISO 291.2008, MOD). This document was proposed by the China Petroleum and Chemical Industry Federation. This document is under the jurisdiction of the National Plastics Standardization Technical Committee (SAC/TC15). Drafting organizations of this document. Guangzhou Institute of Quality Supervision and Inspection, Zhejiang Rui High-tech Materials Co., Ltd., Jieshou City Yaxin Plastic Technology Co., Ltd., Nanjing Jiangning Analytical Instrument Co., Ltd., Shandong Dawn Polymer Materials Co., Ltd., Zhejiang Huafeng Synthetic Resin Co., Ltd. Company, Zhonglan Chenguang Chemical Research and Design Institute Co., Ltd., Xiamen Cangming Technology Co., Ltd., Qingdao Dagang Customs of the People’s Republic of China, China Guangdong Nuclear Power Juner (Zhejiang) New Materials Co., Ltd., Shenzhen Zhongan Testing Standard Technology Co., Ltd., Dongguan Zhongbiao Technology Co., Ltd., Jilin Province products Quality Supervision and Inspection Institute, Pingdingshan Shenma Engineering Plastics Co., Ltd. The main drafters of this document. Li Xiaozeng, Zhao Junhuan, Zhang Runhan, Wang Fuhai, Li Yetian, Tian Hongchi, Jin Meijin, Xie Peng, Xu Jieli, Gao Jianguo, Tian Jibo, Zhu Weihao, Zheng Jiantang, He Guoshan, Su Yuan, Li Shangyu, Qin Xinxin, Guo Yingying. Plastic vertical soft and thin specimens in contact with a small flame source Combustion performance measurement

1 Scope

1.1 This document specifies a small-scale screening procedure in the laboratory for comparing vertical soft and thin plastic specimens exposed to low-energy ignition sources Relative combustion performance under the. It is suitable for testing by ISO 1210 method B due to distortion or shrinkage during ignition Sample. 1.2 The provisions of this document apply to the method for measuring the afterglow and afterglow time of the sample. 1.3 The classification described in Appendix A can be used for quality control or pre-selection of product raw materials. The classification determined by this test method is only applicable The material used in the measurement of the sample. Note. The test results are affected by the material components, such as the concentration of pigments, fillers, and flame retardants.

2 Normative references

The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to This document. GB/T 6379.2-2004 Measurement methods and accuracy of results (accuracy and precision) Part 2.Determine standard measurement methods The basic method of method repeatability and reproducibility (ISO 5725-2.1994, IDT) ISO 291.2008 Plastic Specimen Condition Adjustment and Test Standard Environment (Plastics-Standardatmospheresforcondi- tioningandtesting) ISO 1043-1.2001 Plastic symbols and abbreviations Part 1.Basic polymers and their characteristic properties (Plastics- Symbolsandabbreviatedterms-Part 1.Basicpolymersandtheirspecialcharacteristics) ISO 1210 Plastics determine the combustion behavior of horizontal and vertical samples in contact with a small flame (50W) ignition source [Plastics-Deter- minationoftheburningbehaviourofhorizontalandverticalspecimensincontactwithasmal-flame (50W)ignitionsource] ISO 10093 Plastics-Firetests-Standardignitionsources ASTMD5207-91 Standard Practice for Flame Calibration of 20mm and 125mm Tests for Small-scale Combustion Testing of Plastic Materials (Standardpracticeforthecalibrationof20mmand125mmtestflamesforsmal-scaleburningtests onplasticmaterials)

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Afterflame Under the specified test conditions, after removing the ignition source, the continuous flame of the material. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 40302-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 40302-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 40302-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 40302-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.