GB/T 3923.1-2013 PDF EnglishUS$85.00 · In stock · Download in 9 seconds
GB/T 3923.1-2013: Textiles -- Tensile properties of fabrics -- Part 1: Determination of maximum force and elongation at maximum force using the strip method Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 3923.1: Historical versions
Similar standardsGB/T 3923.1-2013: Textiles -- Tensile properties of fabrics -- Part 1: Determination of maximum force and elongation at maximum force using the strip method---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT3923.1-2013 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 59.080.30 W 04 Replacing GB/T 3923.1-1997 Textiles - Tensile Properties of Fabrics - Part 1. Determination of Maximum Force and Elongation at Maximum Force Using the Strip Method (ISO 13934-1.1999, MOD) Issued on. OCTOBER 10, 2013 Implemented on. MAY 1, 2014 Issued by. General Administration for Quality Supervision, Inspection and Quarantine (AQSIQ); Standardization Administration (SAC) of the People’s Republic of China. Table of ContentsForeword... 3 1 Scope... 5 2 Normative References... 5 3 Terms and Definitions... 5 4 Principle... 8 5 Sampling... 8 6 Apparatus... 8 7 Atmosphere for Conditioning and Testing... 9 8 Preparation of Test Specimen... 9 9 Procedure... 11 10 Calculation and Expression of Results... 13 11 Test Report... 16 Appendix A... 18 Appendix B... 19ForewordGB/T 3923 consists of the following parts, under the general title “Textiles - Tensile properties of fabrics”. — Part 1.Determination of maximum force and elongation at maximum force using the strip method; — Part 2.Determination of maximum force using the grab method. This Part is Part 1 of GB/T 3923. This Part was drafted according to the rules specified in GB/T 1.1-2009. This Part replaces GB/T 3923.1-1997 "Textiles - Tensile properties of fabrics - Part 1. Determination of breaking force and elongation at breaking force - Strip method". Compared with GB/T 3923.1-1997, the main technical changes in this Part are as follows. — The provision of "The method is restricted to the use of constant rate of extension (CRE) testing machines" in Chapter 1 was deleted; — In Chapter 2 "Normative References", GB/T 8170 was deleted; GB/T 6682, GB/T 16825.1 and GB/T 19022 were added; — 3.2, 3.3 and 3.14 of the original standard were deleted; the notes of 3.3 and 3.5 were added; — Add the note of 6.1; — The provision of laboratory sampling (8.1) was integrated into Chapter 5; — Add the column of "rate of elongation" in Table 1; — The requirements of "round the results for values" in 10.1 was modified; and add "if required " in 10.3 and 10.4. This Part was redrafted based on ISO 13934-1.1999 "Textiles - Tensile properties of fabrics - Part 1.Determination of maximum force and elongation at maximum force using the strip method" (English edition). The main differences between this Part and ISO 13934-1.1999 are as follows. — Foreword, introduction and bibliography of the international standard were deleted; — Chapter 1 "Scope" was modified; — The international standards and European Union standards specified in Normative References are replaced by corresponding national standards of China; — The note of 3.3 was modified; — Subclauses of 6.1 was replaced by inclusion of items; — The hanging paragraph(es) of 9.3 and 9.4 were changed into 9.3.1 and 9.4.1; the series number of subsequent subclauses were increased accordingly; — Add the notes of 9.3.1 and 9.3.3; — Chapter 10 was divided into 4 subclauses; add the note of 10.1 and equations (1) to (5). This Part was proposed by the China National Textile and Apparel Council. This Part shall be under the jurisdiction of Subcommittee on Basic Standard of the National Technical Committee 209 on Textiles of Standardization Administration of China (SAC/TC 209/SC 1). Drafting organizations of this Part. CTS (Beijing) Textile Testing & Certification Services and National Textile Quality Supervision Testing Center. Chief drafting staffs of this Part. Liu Ming, Zheng Yuying, Wang Ying and Li Yafeng. The previous editions replaced by this Standard are as follows. — GB/T 3923-1983; — GB/T 3923.1-1997. Textiles - Tensile Properties of Fabrics - Part 1. Determination of Maximum Force and Elongation at Maximum Force Using the Strip Method1 ScopeThis Part of GB/T 3923 specifies a procedure to determine the maximum force and elongation at maximum force of textile fabrics using a strip method.2 Normative ReferencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.3 Terms and DefinitionsFor the purposes of this document, the following terms and definitions apply. Length of a test specimen under specified pretension between the two effective clamping points at the beginning of certain tests (see 3.3).4 PrincipleA fabric test specimen of specified dimensions is extended at a constant rate until it ruptures. The maximum force and the elongation at maximum force and, if required, the force at rupture and the elongation at rupture are recorded.5 SamplingSelect samples either in accordance with the procedure laid down in the material specification for the fabric, or as agreed between the interested parties.6 ApparatusMetrological confirmation system of the tensile-testing machine shall be in accordance with GB/T 19022.The constant-rate-of-extension (CRE) machine shall have the general characteristics as follows.7 Atmosphere for Conditioning and TestingThe atmospheres for preconditioning, conditioning and testing shall be as specified in GB/T 6529.8 Preparation of Test SpecimenFor woven fabrics, each test specimen shall be cut with its length parallel to the warp or the weft of the fabric and shall be sufficiently wide to allow the necessary fringes.9 ProcedureSet the rate of extension or elongation of the tensile-testing machine as a function of the elongation at maximum force of the fabric as specified in Table 1. Perform the test according 9.1 to 9.4 immediately after removal of a test specimen from the liquid (see 8.4.2) and briefly placing it on blotting paper to remove excess water. For wet tests, apply half of the pretension specified in 9.3.2. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 3923.1-2013 be delivered?Answer: The full copy PDF of English version of GB/T 3923.1-2013 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 3923.1-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3923.1-2013_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 3923.1-2013 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 3923.1-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3923.1-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 3923.1-2013?A step-by-step guide to download PDF of GB/T 3923.1-2013_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 3923.1-2013". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
