GB/T 3832-2008 English PDFUS$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 3832-2008: Broaches shanks Status: Valid GB/T 3832: Historical versions
Basic dataStandard ID: GB/T 3832-2008 (GB/T3832-2008)Description (Translated English): Broaches shanks Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J41 Classification of International Standard: 25.100.25 Word Count Estimation: 10,149 Date of Issue: 2008-08-28 Date of Implementation: 2009-03-01 Older Standard (superseded by this standard): GB/T 3832.1-2004; GB/T 3832.2-2004; GB/T 3832.3-2004 Regulation (derived from): National Standard Approval Announcement 2008 No.14 (Total No.127) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the rectangular shank keyway broaches, within broaches front handle, rear shank types and basic dimensions. This standard applies to: a) a shank width of 4mm ~ 45mm rectangular shank keyway broaches, b) 4mm ~ 400mm cylindrical shank broaches before the shank diameter, c) shank diameter 12mm ~ 100mm inner pull After a cylindrical knife handle. GB/T 3832-2008: Broaches shanks---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Broaches shanks ICS 25.100.25 J41 National Standards of People's Republic of China Replacing GB/T 3832.1 ~ 3832.3-2004 Pull shank Posted 2008-08-28 2009-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 3832.1-2004 "pull the shank - Part 1. Rectangular shank", GB/T 3832.2-2004 "pull handle Part Part 2. Cylindrical front handle ", GB/T 3832.3-2004" pull the shank - Part 3. cylindrical handle. " This standard and GB/T 3832.1-2004, GB/T 3832.2-2004, GB/T 3832.3-2004 there are technical differences compared to the following. --- Three parts into one standard; --- Editorial changes. The standard proposed by China Machinery Industry Federation. This standard tool by the National Standardization Technical Committee (SAC/TC91) centralized. This standard was drafted. Harbin first tool Manufacturing Co., Ltd. The main drafters of this standard. Songtie Fu, Wang Jiaxi, Zhang Qiang, Luo Yan. This standard replaces the standards previously issued as follows. --- GB 3832.1-1983, GB/T 3832.1-2004; --- GB 3832.2-1983, GB/T 3832.2-2004; --- GB 3832.3-1983, GB/T 3832.3-2004. Pull shank1 ScopeThis standard specifies the rectangular shank keyway broaches, broaches cylindrical inner front handle, after shanks and basic dimensions. This standard applies to. a) shank width 4mm ~ 45mm rectangular shank keyway broach; b) shank diameter of 4mm ~ broaches cylindrical front handle within 100mm; c) shank diameter of 12mm ~ 100mm inner cylindrical broach rear handle.2 type and size2.1 Basic structure type is divided into rectangular shank type Ⅰ, Ⅱ two types. Ⅰ type --- flat rectangular blade shank. Type Ⅱ --- wide rectangular blade shank. 2.1.1 Ⅰ type --- flat rectangular blade shank types and dimensions in Figure 1 and Table 1. Millimeters Allow made a 90 °. Pattern 1 Ⅰ --- flat rectangular blade shank ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3832-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 3832-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 3832-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3832-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 3832-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3832-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |