GB/T 38245-2019 English PDF

US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 38245-2019: Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 38245-2019	359	Add to Cart	4 days	Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components	Valid

Similar standards

GB/T 7247.1   GB/T 39118   GB/T 18490.1   GB/T 38248   GB/T 38246   

Basic data

Standard ID: GB/T 38245-2019 (GB/T38245-2019)
Description (Translated English): Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: L51
Classification of International Standard: 31.260
Word Count Estimation: 18,180
Date of Issue: 2019-10-18
Date of Implementation: 2020-05-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 38245-2019: Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Optics and optical instruments--Lasers and laser-related equipment--Test method for absorptance of optical laser components ICS 31.260 L51 National Standards of People's Republic of China Optical and optical instrumentation lasers and laser related equipment Laser optical component absorption rate test method (ISO 11551.2003, MOD) Published on.2019-10-17 2020-05-01 implementation State market supervision and administration China National Standardization Administration issued

Content

Foreword III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 symbols and units of measure 1 5 Test conditions 2 6 Test principle 3 7 Test Process 4 8 Calculation method 5 9 Test Report 7 Appendix A (informative) Factors affecting the absorption rate test 9 Appendix B (informative) Impact of signal distortion 10 Appendix C (informative) Temperature Data Parameter Algorithm 13

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the redrafting method to modify the use of ISO 11551.2003 "optical and optical instrument lasers and laser-related equipment Optical Optical Element Absorbance Test Method. This standard has structural changes compared to ISO 11551.2003. Move the diagram in Chapter 5 to Chapter 6, and add 6.1 test schematics; The original Chapter 5 is divided into 5.1 test environment, 5.2 test light source and 5.3 test sample. The technical differences between this standard and ISO 11551.2003 and their reasons are as follows. ---About the normative reference documents, this standard has made technical adjustments to adapt to China's technical conditions, adjustments The situation is reflected in Chapter 2, “Regulatory Citations”, and the specific adjustments are as follows. ● Replace ISO 31-6.1992 with GB/T 3102.6 equivalent to the international standard; ● Replaced ISO 11145.2001 with GB/T 15313 modified to international standards. --- Added the terms "heat loss coefficient" and "light trap" (see Chapter 3); --- Table 1 adds the sign and unit of pulse energy and repetition frequency (see Chapter 4). This standard was proposed by the China Machinery Industry Federation. This standard is under the jurisdiction of the National Optical and Photonics Standardization Technical Committee (SAC/TC103). This standard was drafted. Dalian Institute of Chemical Physics, Chinese Academy of Sciences, University of Electronic Science and Technology, Shenyang Instrument Science Research Institute Co., Ltd. Institute of Applied Electronics, China Academy of Engineering Physics, China Institute of Ordnance Industry Standardization, Southwest Institute of Technical Physics. The main drafters of this standard. Wang Feng, Li Gang, Li Bincheng, Deng Yuwen, Yin Xiaojun, Xu Qiuling, Zhou Wenchao, Hu Xiaoyang, Meng Fanping, Ye Dahua, Jia Wenbo, Jin Yuqi, Sun Long. Optical and optical instrumentation lasers and laser related equipment Laser optical component absorption rate test method

1 Scope

This standard specifies the terms and definitions of laser optical component absorption rate test methods, symbols and units of measurement, test conditions, test principles, Test process, calculation method and test report. This standard applies to the test of the absorption rate of laser optical components.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 3102.6 The amount and unit of light and related electromagnetic radiation (GB/T 3102.6-1993, eqvISO 31-6.1992) GB/T 15313 laser terminology (GB/T 15313-2008, ISO 11145.2006, MOD) GB/T 25915.1-2010 Clean rooms and related controlled environments - Part 1. Air cleanliness (ISO 14644-1..1999, IDT)

3 Terms and definitions

The following terms and definitions as defined in GB/T 3102.6 and GB/T 15313 apply to this document. 3.1 Absorption rate absorptance The ratio of the absorbed radiant flux to the incident radiant flux. Note. The absorption rate defined in this standard is limited to the absorption process of energy into heat. For some types of optics and radiation, additional non-thermal processes may lead The absorption loss is undetectable by the test procedure described in this standard (see Appendix A). 3.2 Heat loss coefficient The degree of heat loss per unit time. 3.3 Light trap beamstop A device for collecting residual or transmitted laser radiation from a test sample.

4 symbols and units of measure

The following symbols apply to this document. (See the symbols, definitions, and units of measure given in Table 1) ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 38245-2019_English be delivered?

Answer: Upon your order, we will start to translate GB/T 38245-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 38245-2019_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 38245-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.