GB/T 3810.6-2016 English PDF

US$154.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3810.6-2016: Test methods of ceramic tiles -- Part 6: Determination of resistance to deep abrasion for unglazed tiles
Status: Valid

GB/T 3810.6: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 3810.6-2016	154	Add to Cart	3 days	Test methods of ceramic tiles -- Part 6: Determination of resistance to deep abrasion for unglazed tiles	Valid
GB/T 3810.6-2006	279	Add to Cart	3 days	Test methods of ceramic tiles -- Part 6: Determination of resistance to deep abrasion for unglazed tiles	Obsolete
GB/T 3810.6-1999	319	Add to Cart	3 days	Test methods of ceramic tiles-- Part 6: Determination of resistance to deep abrasion for unglazed tiles	Obsolete

Similar standards

GB/T 4100   GB/T 6952   GB 6952   GB/T 3810.1   GB/T 3810.12   GB/T 3810.11   

Basic data

Standard ID: GB/T 3810.6-2016 (GB/T3810.6-2016)
Description (Translated English): Test methods of ceramic tiles -- Part 6: Determination of resistance to deep abrasion for unglazed tiles
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Q31
Classification of International Standard: 91.100.25
Word Count Estimation: 8,860
Date of Issue: 4/25/2016
Date of Implementation: 2017-03-01
Older Standard (superseded by this standard): GB/T 3810.6-2006
Regulation (derived from): National Standard Announcement No
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 3810.6-2016: Test methods of ceramic tiles -- Part 6: Determination of resistance to deep abrasion for unglazed tiles

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test methods of ceramic tiles - Part 6. Determination of resistance to deep abrasion for unglazed tiles ICS 91.100.25 Q31 National Standards of People's Republic of China Replacing GB/T 3810.6-2006 Test method for ceramic tiles Part 6. determination of wear depth of unglazed tiles Testmethodsofceramictiles-Part 6. Determination of (ISO 10545-6..2010, Ceramictiles-Part 6. Determination ofresistanceto deepabrasionforunglazedtiles, IDT) 2016-04-25 released 2017-03-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released

Foreword

GB/T 3810 "ceramic tile test method" is divided into 16 parts. - Part 1. Sampling and receiving conditions; - Part 2. Inspection of dimensions and surface quality; - Part 3. Determination of water absorption, apparent porosity, apparent relative density and bulk density; - Part 4. Determination of fracture modulus and failure strength; - Part 5. Determining the impact resistance of a brick with a recovery factor; - Part 6. Determination of wear depth of unglazed tiles; - Part 7. Determination of abrasion resistance of glazed tiles; - Part 8. Determination of linear thermal expansion; - Part 9. Determination of thermal shock resistance; - Part 10. Determination of wet expansion; - Part 11. Determination of glaze resistance of glazed tiles; - Part 12. Determination of frost resistance; - Part 13. Determination of resistance to chemical corrosion; - Part 14. Determination of resistance to contamination; - Part 15. Determination of lead and cadmium elution of glazed tiles; - Part 16. Determination of small chromatic aberration. This part is part 6 of GB/T 3810. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part of the replacement GB/T 3810.6-2006 "ceramic tile test method Part 6. no glaze brick wear depth determination." This part of the main changes compared with GB/T 3810.6-2006 as follows. --- modified the reference file (see Chapter 2, Chapter 2 of the.2006 edition); --- modified abrasive requirements (see 4.3, version 4.3); --- The corresponding values of chord length and volume are modified (see Table 1, version 1.26). This part uses the translation method equivalent to ISO 10545-6..2010 "Ceramic tiles Part 6. Determination of wear-resistant depth of glazed tiles" (English Version). In this part of the normative reference to the international documents have a consistent correspondence between the following documents. GB/T 2481.1-1998 Determination and characterization of abrasive particle size composition for consolidation abrasives - Part 1. Coarse abrasive grains F4 ~ F220 (eqvISO 8486-1..1996) This section makes the following editorial changes. --- Standard name changed to "Ceramic tile test method Part 6. Determination of wear depth of glazed tiles". This section is proposed by the China Building Materials Federation. This part of the National Building Sanitary Ceramics Standardization Technical Committee (SAC/TC249) centralized. This part of the drafting unit. Xianyang Ceramic Research and Design Institute, Hangzhou Nobel Group Co., Ltd., Guangdong Mona Lisa New Materials Group Limited, Guangdong Xinghui Ceramics Group Co., Ltd., Guangdong Dongpeng Holding Co., Ltd., Ministry of Industry and Information Technology Building Sanitary Ceramics and Wei Bath product quality control technology evaluation laboratory. The main drafters of this section. Duan Xianhu, Wang Bo, Li Ying, Zhang Qikang, Chen Hongzhe, Jin Guoting. This part of the previous version of the standard to replace the release of the situation. --- GB/T 13479-1992; GB/T 3810.6-1999, GB/T 3810.6-2006. Test method for ceramic tiles Part 6. determination of wear depth of unglazed tiles

1 Scope

This part of GB/T 3810 specifies the test method for deep wear of glazed tiles for all kinds of flooring.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. ISO 630-1 structural steel - Part 1. General technical delivery conditions for hot rolled products (Structuralsteels-Plates, wide flats, bars, sectionsandprofiles) ISO 8486-1 Determination and marking of abrasive grain size composition for consolidated abrasives - Part 1. Coarse abrasive grains F4 to F220 (Bonded abrasives-Determinationanddesignationofgrainsizedistribution-Part 1. MacrogritsF4toF220)

3 principle

In the case of specified conditions and abrasive in the case of friction by the wheel in the brick rotation of the front of the grinding pit, measured by the length of the measured pit The abrasion resistance of glazed tiles.

4 equipment

4.1 wear test machine (see Figure 1). It consists of a friction wheel, a hopper with an abrasive feed device, a sample holder and a counterweight. Friction wheel is Made of ISO 630-1 steel, the diameter is.200mm ± 0.2mm, the edge thickness is 10mm ± 0.1mm, the speed is 75r/min. The specimen is subjected to the reverse pressure of the friction wheel and is passed through the corundum adjustment test machine. Pressure adjustment with F80 (ISO 8486-1) corundum After the abrasive 150 turns, a grinding pit with a chord length of 24 mm ± 0.5 mm is produced. Quartz glass as a basic standard can also be used float glass or Other applicable materials. When the friction wheel wears to 0.5% of the original diameter, the grinding wheel must be replaced. 4.2 Measuring tool with measuring accuracy of 0.1mm. 4.3 abrasive. Conforms to F80 as specified in ISO 8486-1. Grinding materials that produce the same result can also be used.

5 samples

5.1 Sample type Using the whole brick or the appropriate size of the sample to do the test. If it is a small sample, try to stick a small sample with a binder in a piece Larger template on. 5.2 Preparation of the sample Use a clean, dry sample. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 3810.6-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 3810.6-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 3810.6-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 3810.6-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 3810.6-2016?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3810.6-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.