GB/T 38043-2019 English PDF

US$944.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 38043-2019: Vacuum cleaners for commercial use - Methods for measuring performance
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 38043-2019	944	Add to Cart	4 days	Vacuum cleaners for commercial use - Methods for measuring performance	Valid

Similar standards

GB/T 21551.5   GB/T 38610   GB/T 23131   GB/T 38048.6   GB/T 38048.4   

Basic data

Standard ID: GB/T 38043-2019 (GB/T38043-2019)
Description (Translated English): Vacuum cleaners for commercial use - Methods for measuring performance
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Y62
Classification of International Standard: 97.080
Word Count Estimation: 50,523
Date of Issue: 2019-10-18
Date of Implementation: 2020-05-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 38043-2019: Vacuum cleaners for commercial use - Methods for measuring performance

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Vacuum cleaners for commercial use--Methods for measuring performance ICS 97.080 Y62 National Standards of People's Republic of China Commercial vacuum cleaner performance test method (IEC /PAS62611.2009, IDT) Published on.2019-10-18 2020-05-01 implementation State market supervision and administration China National Standardization Administration issued

Content

Foreword III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 General conditions of the test 3 4.1 Atmospheric conditions 3 4.2 Test equipment and materials 3 4.3 Voltage and frequency 4 4.4 Preheating of vacuum cleaners and accessories 4 4.5 Parts of the vacuum cleaner 4 4.6 Operation of the vacuum cleaner 4 4.7 Preset 4 before each test 4.8 Dust Initial Application 4 4.9 Mechanical Operation 4 4.10 Number of samples 5 4.11 Indoor Reference Vacuum Cleaner System 5 5 dry vacuum cleaner cleaning test 5 5.1 Dust removal on smooth hard floor 5 5.2 Dust removal on hard floors with gaps 6 5.3 Dust removal on the carpet 7 5.4 Dust removal along the wall 9 5.5 Removing fibers from the carpet 9 5.6 Maximum use volume of dust collector 10 5.7 Air Data 10 5.8 Performance of dust collector with dust load 11 5.9 Vacuum cleaner filtration efficiency 14 5.10 Equivalent HEPA filter rating for vacuum cleaners 17 5.11 Vacuum cleaner discharge 17 6 Other tests 18 6.1 Movement resistance 18 6.2 Cleaning under office furniture 18 6.3 Maximum operating radius 19 6.4 Impact resistance 19 6.5 Deformation of hoses and connecting pipes 20 6.6 Impact test 21 6.7 Hose bending 22 6.8 Repeated bending of the hose 23 6.9 Life test 24 6.10 Quality 24 6.11 Grip 24 6.12 Size 24 6.13 Noise level 24 6.14 Energy consumption 24 7 Test materials and equipment 26 7.1 Test materials 26 7.2 Test equipment 29 8 Instructions for use 38 9 Sales information 38 Appendix A (informative) Material Information 40 Appendix B (informative) Sales Information 43 Appendix C (informative) Material Information 44 Reference 46

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the translation method equivalent to IEC /PAS62611.2009 "Commercial Vacuum Cleaner Performance Test Method". The documents of our country that have a consistent correspondence with the international documents referenced in this standard are as follows. ---GB/T 4214.1-2017 General requirements for noise test methods for household and similar electrical appliances (IEC 60704-1.2010, MOD) --- GB/T 4214.2-2008 Noise test methods for household and similar electrical appliances - Particular requirements for vacuum cleaners (IEC 60704-2-1..2000, IDT) ---GB/T 17671-1999 Cement mortar strength test method (ISO method) (idtISO 679.1989) Household vacuum cleaners - Part 1. Dry vacuum cleaner performance test methods - GB/T 20291.1 (IEC 60312-1.2010, IDT) This standard was proposed by the China Light Industry Association. This standard is under the jurisdiction of the National Standardization Technical Committee for Household Appliances (SAC/TC46). This standard was drafted. China Household Electrical Appliances Research Institute, Jiangsu Midea Cleaning Electric Co., Ltd., Lake Electric Co., Ltd. Division, Wanyuan Zhongxiang Alliance Technology (Beijing) Co., Ltd., National Household Appliance Quality Supervision and Inspection Center, Suzhou Green Innovation Testing Technology Service Co., Ltd. Company, Zhejiang Inspection and Quarantine Science and Technology Research Institute. The main drafters of this standard. Li Shanshan, Zhou Lei, Qin Weihua, Sun Luping, Xiong Kaisheng, Manan. Commercial vacuum cleaner performance test method

1 Scope

This standard applies to commercial vacuum cleaners. The purpose of this standard is to specify the basic performance characteristics of the vacuum cleaner that the user is concerned with and to describe methods for measuring these characteristics. Note. Due to environmental conditions, time changes, testing materials and the level of operation, the same experiment is performed at the same time when multiple appliance comparison tests are performed. The chamber is tested by the same operator and most of the test methods will yield more reliable results. For safety requirements, see IEC 60335-1, IEC 60335-2-2 and IEC 60335-2-69.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. IEC 60312 Household Vacuum Cleaner Performance Test Method (Vacuumcleanersforhouseholduse-Methodsof Measuringtheperformance) Household and similar electrical appliances - Test methods - Part 1. General requirements (Household and similare- lectricalappliances-Testcodeforthedeterminationofairborneacousticalnoise-Part 1.Generalre- Requirements() Household and similar electrical appliances - Test methods - Part 2-1. Particular requirements for vacuum cleaners (Householdandsimilarelectricalappliances-Testcodeforthedeterminationofairborneacoustical noise-Part 2-1.Particularrequirementsforvacuumcleaners) Standard atmospheric specifications for ISO 554 conditioning and/or testing (Standardatmospheresforconditioningand/ortes- ting-Specifications) ISO 679 Cement test method strength determination (Cement-Testmethods-Determinationofstrength) ISO 5167-1 - Measurement of full-tube fluid flow with differential pressure devices installed in circular cross-section pipes - Part 1. General principles and (Measurementoffluidflowbymeansofpressuredifferentialdevicesinsertedincircularcross-sec- tionconduitsrunningful-Part 1.Generalprinciplesandrequirements) EN1822 Classification of HEPA and ULPA filters (ClassificationofHEPAandULPAfilters) Total emissions of ASTMF2608 vacuum cleaners (Totalemissionsofavacuumcleaner) ASTMF1977 Vacuum filtration efficiency of the vacuum cleaner (Fractionalfiltration efficiency of avacuumcleaner)

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Cleaning head cleaninghead Passive nozzle, ground brush or power nozzle connected to the suction pipe, separate from the vacuum cleaner main unit or part of it, for vacuum cleaner The part that cleans the surface. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 38043-2019_English be delivered?

Answer: Upon your order, we will start to translate GB/T 38043-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 38043-2019_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 38043-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.