GB/T 37855-2019 PDF EnglishUS$119.00 · In stock · Download in 9 seconds
GB/T 37855-2019: Glass containers - Dimensions for 26H126 crown finish Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 37855-2019: Glass containers - Dimensions for 26H126 crown finish---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT37855-2019(Glass container 26H126 crown bottle size) ICS 55.100 Y22 National Standards of People's Republic of China Glass container 26H126 crown bottle size Glasscontainers-Dimensionsfor26H126crownfinish (ISO 12822.2015, Glasspackaging-26H126crownfinish-Dimensions, MOD) Published on.2019-08-30 2020-03-01 implementation State market supervision and administration China National Standardization Administration issued ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the redrafting method to modify the ISO 12822.2015 "glass packaging 26H126 crown bottle size". The documents of our country that have a consistent correspondence with the international documents referenced in this standard are as follows. ---GB/T 21299-2015 Glass container bottle tolerance (ISO 9058.2008, MOD). The technical differences between this standard and ISO 12822.2015 and their reasons are as follows. ---Modified the outer diameter tolerance of the bottle mouth in Figure 2 to adapt to the actual production and use situation in China; --- Revised the distance between the mouth ring bonding line and the bottle mouth plane height in Figure 4 and Figure 5 to adapt to the actual production and use situation in China; --- Change the specific value of the gap between the mold and the seam in Figure 4 and Figure 5 to be agreed by the supplier and the buyer to adapt to the actual production and use in China. Happening. This standard makes the following editorial changes. --- Modified the standard name. This standard was proposed by the China Light Industry Association. This standard is under the jurisdiction of the National Daily Glass Standardization Technical Committee (SAC/TC377). This standard was drafted. Donghua University, National Eyeglass Glass Enamel Product Quality Supervision and Inspection Center, Shanghai Glasses Glass Enamel Products Quality supervision and inspection station, National Daily Glass Enamel Standardization Center. The main drafters of this standard. Guo Lin, Xu Xiaojian, Wu Jiaxu, Gong Miao, Xu Zhangqian, Sun Huanbao, Zhang Nini, Ye Jiayi, Dai Qi, Wang Helan. Glass container 26H126 crown bottle size1 ScopeThis standard specifies the size of the crown opening of the glass container 26H126. This standard applies to 26mm shallow crown bottle glass bottles for beverages. The shallow crown finish is designed with a metal crown cap.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. ISO 9058 Glass Container Bottle Tolerance (Glasscontainers-Standardtolerancesforbottles)3 sizeThe design and size requirements of the bottle mouth are shown in Figures 1 to 5. Details not specified should be determined according to the actual application. General tolerances are detailed in ISO 9058. The unit is mm a The inner diameter φ of the bottle mouth at a maximum depth of 3 mm from the top of the bottle mouth should be between 17.0 mm and 18.5 mm. Figure 1 bottle shoulder and bottle size Production restrictions. Some capping equipment may impose more size restrictions on the bottleneck profile. GB/T 37855-2019 (Glass container 26H126 crown bottle size) ICS 55.100 Y22 National Standards of People's Republic of China Glass container 26H126 crown bottle size Glasscontainers-Dimensionsfor26H126crownfinish (ISO 12822.2015, Glasspackaging-26H126crownfinish-Dimensions, MOD) Published on.2019-08-30 2020-03-01 implementation State market supervision and administration China National Standardization Administration issuedForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the redrafting method to modify the ISO 12822.2015 "glass packaging 26H126 crown bottle size". The documents of our country that have a consistent correspondence with the international documents referenced in this standard are as follows. ---GB/T 21299-2015 Glass container bottle tolerance (ISO 9058.2008, MOD). The technical differences between this standard and ISO 12822.2015 and their reasons are as follows. ---Modified the outer diameter tolerance of the bottle mouth in Figure 2 to adapt to the actual production and use situation in China; --- Revised the distance between the mouth ring bonding line and the bottle mouth plane height in Figure 4 and Figure 5 to adapt to the actual production and use situation in China; --- Change the specific value of the gap between the mold and the seam in Figure 4 and Figure 5 to be agreed by the supplier and the buyer to adapt to the actual production and use in China. Happening. This standard makes the following editorial changes. --- Modified the standard name. This standard was proposed by the China Light Industry Association. This standard is under the jurisdiction of the National Daily Glass Standardization Technical Committee (SAC/TC377). This standard was drafted. Donghua University, National Eyeglass Glass Enamel Product Quality Supervision and Inspection Center, Shanghai Glasses Glass Enamel Products Quality supervision and inspection station, National Daily Glass Enamel Standardization Center. The main drafters of this standard. Guo Lin, Xu Xiaojian, Wu Jiaxu, Gong Miao, Xu Zhangqian, Sun Huanbao, Zhang Nini, Ye Jiayi, Dai Qi, Wang Helan. Glass container 26H126 crown bottle size1 ScopeThis standard specifies the size of the crown opening of the glass container 26H126. This standard applies to 26mm shallow crown bottle glass bottles for beverages. The shallow crown finish is designed with a metal crown cap.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. ISO 9058 Glass Container Bottle Tolerance (Glasscontainers-Standardtolerancesforbottles)3 sizeThe design and size requirements of the bottle mouth are shown in Figures 1 to 5. Details not specified should be determined according to the actual application. General tolerances are detailed in ISO 9058. The unit is mm a The inner diameter φ of the bottle mouth at a maximum depth of 3 mm from the top of the bottle mouth should be between 17.0 mm and 18.5 mm. Figure 1 bottle shoulder and bottle size Production restrictions. Some capping equipment may impose more size restrictions on the bottleneck profile. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 37855-2019 be delivered?Answer: The full copy PDF of English version of GB/T 37855-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 37855-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37855-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 37855-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 37855-2019?A step-by-step guide to download PDF of GB/T 37855-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 37855-2019". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
