GB/T 37820.1-2024 English PDFUS$514.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 37820.1-2024: Ships and marine technology - Design, location and use of shipboard safety signs, fire control plan signs, safety notices and safety markings - Part 1: Design principles Status: Valid GB/T 37820.1: Historical versions
Basic dataStandard ID: GB/T 37820.1-2024 (GB/T37820.1-2024)Description (Translated English): Ships and marine technology - Design, location and use of shipboard safety signs, fire control plan signs, safety notices and safety markings - Part 1: Design principles Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: U04 Classification of International Standard: 47.020.01 Word Count Estimation: 26,232 Date of Issue: 2024-04-25 Date of Implementation: 2024-08-01 Older Standard (superseded by this standard): GB/T 37820.1-2019 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 37820.1-2024: Ships and marine technology - Design, location and use of shipboard safety signs, fire control plan signs, safety notices and safety markings - Part 1: Design principles---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 47:020:01 CCSU04 National Standards of People's Republic of China Replaces GB/T 37820:1-2019 Ships and marine technology Ship safety signs, Fire control diagram signs, safety tips and Design, location and use of safety signs Part 1: Design principles Safety markings-Part 1: Design principles (ISO 24409-1:2020,IDT) Published on April 25, 2024, implemented on August 1, 2024 State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Types and uses of signs, markings and notices 2 4:1 General Principles 2 4:2 Safety Signs 3 4:2:1 MES (Merge Escape Sign) --- Escape route instructions 3 4:2:2 Emergency Equipment Sign (EES) - Use and location of first aid facilities and portable safety equipment 3 4:2:3 Life-saving systems and equipment marking (LSS) --- the use and location of life-saving systems and equipment 3 4:2:4 Fire Equipment Sign (FES) --- Use and location of fire equipment 3 4:2:5 Prohibition Signs (PSS) --- Prohibited Behavior 3 4:2:6 Warning Sign (WSS)---Hazard Prompt 3 4:2:7 Mandatory Action Signs (MSS) - Mandatory reminders and instructions 3 4:3 Fire control plan signs 3 5 Design of safety signs on board ships 3 5:1 General requirements 3 5:2 Safety Information 4 5:3 Meaning, function and icon content 4 5:4 Color and Geometry 4 5:5 Graphical symbols 6 5:6 Combination of graphic symbols or graphic elements 6 5:7 Element 6 5:8 Prohibition 7 5:9 Boundary 7 5:10 Arrow 7 6 Supplementary and combined signs 7 6:1 General requirements 7 6:2 Combination signs 7 6:3 Supplementary logo colors 8 6:4 Supplementary marking text 8 6:5 Supplementary marking format 8 7 Combination logo layout 11 7:1 General requirements 11 7:2 Boundary 11 7:3 Layout 11 8 Multiple Signs 12 9 Use of Arrows13 10 Fire control diagram signs 15 11 Safety Marking 15 12 Lighting and brightness of safety signs, safety-related signs and safety instructions 15 13 Durability and brightness of the marking 16 14 Logo Mark 16 Reference 17ForewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting: This document is GB/T 37820 Ships and marine technology Ship safety signs, fire control plan signs, safety tips and safety markings Design, location and use of Part 1: GB/T 37820 has published the following parts: --- Part 1: Design principles; --- Part 2: Classification; --- Part 3: Principles of use: This document replaces GB/T 37820:1-2019 Ships and marine technology Ship safety signs, safety-related signs, safety tips and safety Compared with GB/T 37820:1-2019, in addition to structural adjustments and editing, In addition to the changes in performance, the main technical changes are as follows: a) Added the term "fire control plan sign" (see 3:2); b) The terms “simulated sign” and “safety-related sign” have been deleted (see 3:3 and 3:8 of the:2019 edition); c) Added "fire control diagram sign" (see 4:3); d) The reference to the figures in ISO 7010 has been changed (see Chapter 5, Chapter 5 of the:2019 edition); e) Changed the reference to the figures in ISO 24409-2 (see Chapter 5, Chapter 5 of the:2019 edition); f) The symbols for releasing lifeboats and lifebuoys with ropes have been changed (see 5:4:1, 5:4:1 of the:2019 edition); g) The instructions for use in the fire equipment signs have been deleted [(see 5:2e of the:2019 edition)]; h) The form of the supplementary mark has been changed (see 6:5, 6:5 of the:2019 edition); i) The “Fire Control Plan Signs” has been changed (see Chapter 10, Chapter 10 of the:2019 Edition): This document is equivalent to ISO 24409-1:2020 "Ships and marine technology - Ship safety signs, fire control plan signs, safety tips" Design, location and use of safety and security markings - Part 1: Design principles: Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents: This document was proposed and coordinated by the National Technical Committee for Standardization of Marine Vessels (SAC/TC12): This document was drafted by: China Shipbuilding Industry Corporation Comprehensive Technical and Economic Research Institute, China Shipbuilding Industry Corporation, Jiangsu Xinshi Dai Shipbuilding Co:, Ltd:, Huazhong University of Science and Technology: The main drafters of this document are: Cheng Nan, Zhu Jiashuai, Liu Wei, Zhang Zhonglin, Song Mengran, Xiang Xianbo, Sun Quan, Zeng Hongli, Liu Jiayin, and Xiang Gong: This document was first published in:2019 and this is the first revision:IntroductionGB/T 37820 Ships and marine technology Design and location of ship safety signs, fire control plan signs, safety tips and safety markings The "Placement and Use" stipulates the general design of ship safety signs, fire control plan signs, safety tips and safety markings provided to ship personnel and guidelines for use, is intended to consist of three parts: --- Part 1: Design principles: The purpose is to provide ship safety signs, fire control plan signs, safety tips and safety markings Universal design principles: --- Part 2: Classification: The purpose is to provide standard signs and safety tips for special use on board ships and to convey safety information based on the safety information conveyed: Categorize and index: --- Part 3: Principles of use: The purpose is to provide the principles for the use of safety signs on board ships and to explain their location, size, graphic symbols and Provide guidance on the correct use of supplementary text: Ships and marine technology Ship safety signs, Fire control diagram signs, safety tips and Design, location and use of safety signs Part 1: Design principles Warning: The colors in this electronic version of the document are not intended to be displayed on screen nor printed out as a physical object: ISO 3864-4 is used as a reference for colorimetric and photometric properties, and for color sequence systems:1 ScopeThis document specifies the general design of ship safety signs, fire control plan signs, safety tips and safety markings to be provided to shipboard personnel in principle:2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document: For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document: ISO 3864-1 Graphical symbols - Safety colours and safety signs - Part 1: Design principles for safety signs and safety markings safety markings Note: GB/T 2893:1-2013 Graphical symbols, safety colors and safety signs Part 1: Design principles for safety signs and safety markings (ISO 3864- 1:2011,MOD) ISO 3864-3:2012 Graphical symbols, safety colours and safety signs - Part 3: Principles for the design of graphic symbols for safety signs foruseinsafetysigns) Note: GB/T 2893:3-2010 Graphical symbols, safety colors and safety signs Part 3: Design principles for graphic symbols for safety signs (ISO 3864-3: 2006,MOD); ISO 3864-4 Graphical symbols - Safety colours and safety signs - Part 4: Chromatic and photometric properties of safety sign materials Note: GB/T 2893:4-2013 Graphical symbols, safety colors and safety signs Part 4: Chromaticity and photometric properties of safety sign materials (ISO 3864-4:2011,MOD) ISO 7010 Graphical symbols - Safety colours and safety signs Registered safety signs Note: GB/T 20132-2006 Ships and marine technology Passenger ship low-level lighting arrangements (ISO 15370:2001, IDT) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 37820.1-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 37820.1-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 37820.1-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37820.1-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 37820.1-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 37820.1-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
