GB/T 37194.1-2018 English PDF

US$174.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 37194.1-2018: Plastics -- Poly (phenylene sulfide) (PPS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 37194.1-2018	174	Add to Cart	3 days	Plastics -- Poly (phenylene sulfide) (PPS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications	Valid

Similar standards

GB/T 40006.1   GB/T 39710   GB/T 37427   GB/T 37189   GB/T 37197   GB/T 37194.2   

Basic data

Standard ID: GB/T 37194.1-2018 (GB/T37194.1-2018)
Description (Translated English): Plastics -- Poly (phenylene sulfide) (PPS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G32
Classification of International Standard: 83.080.20
Word Count Estimation: 9,952
Date of Issue: 2018-12-28
Date of Implementation: 2019-11-01
Regulation (derived from): National Standard Announcement No. 17 of 2018
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 37194.1-2018: Plastics -- Poly (phenylene sulfide) (PPS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastics--Poly(phenylene sulfide)(PPS) moulding and extrusion materials--Part 1. Designation system and basis for specifications ICS 83.080.20 G32 National Standards of People's Republic of China Plastic polyphenylene sulfide (PPS) molding and extrusion materials Part 1. Naming system and classification basis Part 1. Designationsystemandbasisforspecifications (ISO 28078-1.2009, IDT) Published on.2018-12-28 2019-11-01 implementation State market supervision and administration China National Standardization Administration issued

Foreword

GB/T 37194 "Plastic polyphenylene sulfide (PPS) molding and extrusion materials" is divided into two parts. --- Part 1. The naming system and classification basis; --- Part 2. Sample preparation and performance determination. This part is the first part of GB/T 37194. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This section uses the translation method equivalent to ISO 28078-1.2009 "Plastic polyphenylene sulfide (PPS) molding and extrusion materials Part 1 Points. Naming System and Classification Foundation. The documents of our country that have a consistent correspondence with the international documents referenced in this part are as follows. GB/T 1844.1-2008 Plastic symbols and abbreviations - Part 1. Basic polymers and their characteristic properties (ISO 1043-1. 2001, IDT) GB/T 16288-2008 Mark of plastic products (ISO 11469.2000, MOD) Plastics - Polyphenylene sulfide (PPS) moulding and extruded materials - Part 2. Preparation and performance testing of specimens Ding (ISO 28078-2.2009, IDT) This part was proposed by the China Petroleum and Chemical Industry Federation. This part is under the jurisdiction of the National Plastics Standardization Technical Committee (SAC/TC15). This standard is mainly drafted by. Zhonglan Chenguang Chemical Research and Design Institute Co., Ltd., Zhejiang Xinhecheng Special Materials Co., Ltd., Dunhuang West Domain Special New Materials Co., Ltd., Zhongguang Nuclear Juner New Materials Co., Ltd., Chongqing Kejufu Engineering Plastics Co., Ltd., Sichuan Deyang Special New Materials Co., Ltd., Zhonglan Chenguang Chengdu Testing Technology Co., Ltd. The main drafters of this standard. Liu Lirong, Zhao Ping, Zhou Guiyang, Zheng Xinfeng, Song Xianghui, Wang Yifan, Zhou Lei, Tan Jianyong, Liu Bin. Plastic polyphenylene sulfide (PPS) molding and extrusion materials Part 1. Naming system and classification basis

1 Scope

1.1 This part of GB/T 37194 specifies the naming system for the classification of thermoplastic polyphenylene sulfide materials. 1.2 Different types of polyphenylene sulfide plastics are based on the values of the characteristic properties specified below and the specific uses and/or processing methods, important properties, Tim Additives based on additives, colorants, fillers, and reinforcement-based classification systems. a) melt mass flow rate or melt viscosity; b) density; c) tensile modulus. 1.3 This part of GB/T 37194 applies to all PPS materials. It is suitable for powder, granule or pellets, unmodified or modified by colorants, additives, fillers and reinforcing materials. material. 1.4 Materials with the same name do not necessarily have the same performance. This section does not provide engineering data, performance data or specified materials. Data on the specific conditions of use and/or processing conditions required by the processing method. These additional properties can be determined as required by the test method specified in ISO 28078-2. 1.5 In order to illustrate the special use of a thermoplastic material or to ensure the reproducibility of processing, additional requirements can be given using character group 5 (see 3.1).

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. ISO 1043-1 Plastic symbols and abbreviations - Part 1. Basic polymers and their characteristic properties (Plastics-Symbolsand abbreviatedterms-Part 1.Basicpolymersandtheirspecialcharacteristics) ISO 11469 General markings and markings for plastic products (Plastics-Genericidentificationandmarkingofplastics Products) Plastics - Polyphenylene sulfide (PPS) moulding and extruding materials - Part 2. Preparation and performance determination of samples (Plas- tics-Poly(phenylenesulfide)(PPS)mouldingandextrusionmaterials-Part 2.Preparationoftest Specimensanddeterminationofproperties)

3 naming system

3.1 Overview The thermoplastic naming system is based on the following standard modes. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 37194.1-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 37194.1-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 37194.1-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 37194.1-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.