GB/T 37183-2023 English PDFUS$334.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 37183-2023: Corrosion control engineering life cycle - Risk assessment Status: Valid GB/T 37183: Historical versions
Basic dataStandard ID: GB/T 37183-2023 (GB/T37183-2023)Description (Translated English): Corrosion control engineering life cycle - Risk assessment Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A01 Classification of International Standard: 03.100.99 Word Count Estimation: 18,154 Date of Issue: 2023-12-28 Date of Implementation: 2024-07-01 Older Standard (superseded by this standard): GB/T 37183-2018 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 37183-2023: Corrosion control engineering life cycle - Risk assessment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 03:100:99 CCSA01 National Standards of People's Republic of China Replace GB/T 37183-2018 Corrosion control project life cycle risk assessment (ISO 23222:2020,IDT) Published on 2023-12-28 2024-07-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contentsPrefaceⅠ 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 General 2 4:1 Objective 2 4:2 Principle 2 5 Risk Assessment Procedure 2 5:1 General requirements 2 5:2 Risk identification 2 5:3 Risk Analysis 2 5:4 Risk Assessment 4 6 Quantitative Risk Analysis 5 Appendix A (informative) Corrosion control project life cycle risk assessment form 6 Appendix B (Informative) Risk Quantitative Analysis 14 Reference 15ForewordThis document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document replaces GB/T 37183-2018 "Corrosion Control Engineering Life Cycle Risk Assessment" and is consistent with GB/T 37183-2018 In addition to structural adjustments and editorial changes, the main technical changes are as follows: a) Changed the scope (see Chapter 1, Chapter 1 of the:2018 edition); b) The referenced document GB/T 23694 has been deleted (see Chapter 3 of the:2018 edition); c) Some terms and definitions have been changed, the terms and definitions of “risk assessment” and “consequences” have been added (see 3:1, 3:5), and “corrosion risk” has been deleted: "risk", "evaluation", "risk pre-evaluation", "risk acceptance evaluation", "risk status evaluation", "economic and risk evaluation", "mitigation", "risk evaluation" The terms and definitions of “valuation agency”, “risk assessment personnel”, “qualitative evaluation method”, “semi-quantitative evaluation method” and “quantitative evaluation method” are revised: Definition of the terms "risk assessment" and "risk identification" risk analysis (see Chapter 3, 3:1, 3:2, 3:3, 3:4, 3:5,:2018 edition) 3:6, 3:7, 3:8, 3:9, 3:10, 3:11, 3:12, 3:13, 3:14, 3:15); d) Added "principles" provisions and deleted "evaluation principle basis", "evaluation content basis" and "evaluation result basis" (see Chapter 4,:2018 4:2, 4:3, 4:4 of the annual version); e) Changed the content of "Risk Assessment Procedure", added "General Requirements", "Risk Identification", "Risk Analysis" and "Risk Assessment", and refined content, emphasizing the requirements for risk analysis from all risk factors (see 5:1, 5:2, 5:3, 5:4, 5:4:3, Chapter 7 of the:2018 edition chapter); f) Added the requirement of “quantitative risk analysis” (see Chapter 6); g) Change the normative appendix "Risk Assessment Agency Qualification Application and Review Procedure Chart" to the informative appendix "Corrosion Control Engineering Whole Life" Cycle Risk Assessment Form” (see Appendix A, Appendix A of the:2018 version); h) Change the normative appendix "Risk Assessment Business Classification" to the informative appendix "Risk Quantitative Analysis" (see Appendix B,:2018 version Appendix B); i) "Objectives", "Management Requirements", "Risk Assessment Contents", "Report Format", "Risk Prevention and Control (Emergency, Plans)" and "Supervision and Inspection" have been deleted: "Communication and Recording", "Information Management", "Risk Assessment Process Block Diagram" and "Risk Assessment Report Format" (see Chapter 5 of the:2018 edition, Chapter 6, Chapter 8, 9:3, Chapter 10, Chapter 11, Chapter 12, Chapter 13, Appendix C, Appendix D): This document is equivalent to ISO 23222:2020 "Corrosion Control Engineering Life Cycle Risk Assessment": Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed by China Petroleum and Chemical Industry Federation: This document is under the jurisdiction of the National Corrosion Control Standardization Technical Committee (SAC/TC381): This document was drafted by: CGNPC, China Corrosion Control Technology Association, China Southern Power Grid Co:, Ltd: Voltage Transmission Company Liuzhou Bureau, Huadian Electric Power Research Institute Co:, Ltd:, Nantong Planet Graphite Co:, Ltd:, Guangdong Corrosion Science and Technology Innovation Research Institute, Guangdong Jianke Innovation Technology Research Institute Co:, Ltd:, North China Electric Power Research Institute Co:, Ltd:, Dalian Jiaotong University, National Inspection and Testing Holding Group Xiongan Co:, Ltd:, CRRC Qingdao Sifang Rolling Stock Co:, Ltd:, Suzhou Thermal Engineering Research Institute Co:, Ltd:, Mingyang Smart Energy Group Co:, Ltd:, Beijing Dingxin New Technology Co:, Ltd:, Nantong Shanjian Graphite Equipment Co:, Ltd:, Suzhou Yunbai Environment Equipment Co:, Ltd:, Jiangsu Dibang Construction Engineering Co:, Ltd:, China Southern Power Grid Industrial Investment Group Co:, Ltd:, Guangdong Provincial Special Equipment Equipment Inspection Institute Foshan Inspection Institute, Guangdong Special Equipment Inspection Institute Maoming Inspection Institute, Hunan Tus Electric Power Construction Co:, Ltd:, Guangdong Power Grid Co:, Ltd: Zhuhai Power Supply Bureau, China Corrosion International Corrosion Control Engineering Technology Research Institute (Beijing) Co:, Ltd:, Shandong Shanghe Electric Power Technology Co:, Ltd:, Qingdao Haodeboer Industrial Co:, Ltd: The main drafters of this document: Pan Xiaojie, Zheng Zhigang, Wang Liang, Deng Yuqiang, Liu Shanli, Zhang Zhiming, Zhang Kai, Zhao Zhendong, Zhang Hongjiang, Ding Zhixin, Huang Shiming, Wang Xiaolu, Sun Xiaoguang, Yao Songnian, Mo Yeqiang, Liao Yonghao, Gao Yuzhu, Fang Su, Miao Shiyang, Huang Juncong, Zhan Yao, Liu Yao, Wang Yong, Ji Chuanling, Zhou Jingzhong, Zhu Shaojun, Huang Songqiang, Zhou Weiqing, Sun Yongliang, He Jiajie, Cao Anying, Luo Zhiyong, Li Hengkui, Guo Minlong, Huang Xiaodong, Zhang Fei, Deng Feifei, Cai Yunlong, Yu Faxin, Cao Fuxiang, Xu Jian, Huang Yu, Liu Xiaoxin, Li Zhencong, Yang Yong, Qin Rongjiang, Zheng Yufa, He Wei, Gao Jiawei, Zou Jian, Hao Yi, Wang Guiming, Zhang Xiaolei, Zhang Ran, Ni Shuangzhong: This document was first published in:2018, and this is the first revision: Corrosion control project life cycle risk assessment1 ScopeThis document specifies general requirements for risk assessment throughout the life cycle of corrosion control projects: This document is applicable to risk assessment work for all types of corrosion control works:2 Normative reference documentsThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document: assessment)3 Terms and definitionsThe following terms and definitions apply to this document: 3:1 risk assessmentriskassessment The whole process of risk identification (3:2), risk analysis (3:3), and risk evaluation (3:4): 3:2 risk identification risk identification The process of discovering, identifying and describing all corrosion risk factors throughout the life cycle of a corrosion control project: 3:3 risk analysis risk analysis The process of analyzing the nature and extent of corrosion risks: Note: Risk analysis is the basis of risk assessment (3:1): 3:4 risk evaluationriskevaluation Compare the results of the risk analysis (3:3) and summarize the traceability and supporting documents to determine the impact of each factor in the entire life cycle of the corrosion control project: Corrosion risk and whether the degree of corrosion is acceptable: 3:5 consequenceconsequence The result of an event's impact on a target: Note 1: The consequences can be certain or uncertain; the impact on the target can be positive or negative; it can be direct or It's indirect: Note 2: Consequences can be expressed qualitatively or quantitatively: Note 3: Any consequences may escalate through chain reactions and cumulative effects: [Source: GB/T 24353-2022,3:6] ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 37183-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 37183-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 37183-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37183-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 37183-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 37183-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
