GB/T 36917.1-2018 English PDF

US$244.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 36917.1-2018: Dentistry -- Laboratory cutters -- Part 1: Steel laboratory cutters
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 36917.1-2018	244	Add to Cart	3 days	Dentistry -- Laboratory cutters -- Part 1: Steel laboratory cutters	Valid

Similar standards

YY/T 1702   YY/T 1692   YY/T 1691   GB/T 36917.2   GB/T 36917.4   GB/T 36917.3   

Basic data

Standard ID: GB/T 36917.1-2018 (GB/T36917.1-2018)
Description (Translated English): Dentistry -- Laboratory cutters -- Part 1: Steel laboratory cutters
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: C33
Classification of International Standard: 11.060.20
Word Count Estimation: 13,199
Date of Issue: 2018-12-28
Date of Implementation: 2020-01-01
Quoted Standard: ISO 1797; ISO 1942; ISO 2157; ISO 6360-3; ISO 8325
Adopted Standard: ISO 7787-1-2016, IDT
Regulation (derived from): National Standard Announcement No. 17 of 2018
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration
Summary: This standard specifies the dimensional requirements and other requirements for steel cutting tools for laboratories. This standard applies to the nine steel cutting tools mainly used in the laboratory. This standard does not apply to other features of the laboratory tool, such as: spiral blade, cross edge.

GB/T 36917.1-2018: Dentistry -- Laboratory cutters -- Part 1: Steel laboratory cutters

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Dentistry--Laboratory cutters--Part 1. Steel laboratory cutters ICS 11.060.20 C33 National Standards of People's Republic of China Dental science laboratory cutting tool Part 1. Steel cutting tools for laboratories (ISO 7787-1.2016, IDT) Published on.2018-12-28 2020-01-01 implementation State market supervision and administration China National Standardization Administration issued

Content

Foreword III Introduction IV 1 Scope 1 2 Normative references 1 3 terms and definitions, symbol 1 4 material 2 5 size and number of cutting edges 2 6 radial runout 7 7 Sampling and judgment 7 8 label 7 9 logo 8 Reference 9

Foreword

GB/T 36917 "The cutting tool for dental laboratory" consists of the following four parts. --- Part 1. Steel cutting tools for laboratories; --- Part 2. Carbide cutting tools for laboratories; --- Part 3. Carbide cutting tools for milling machines; --- Part 4. Micro-carbide cutting tools for laboratories. This part is the first part of GB/T 36917. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This section uses the translation method equivalent to the ISO 7787-1.2016 "cutting tools for dental laboratories Part 1. Steel for laboratories Cutting tool. The documents of our country that have a consistent correspondence with the international documents referenced in this part are as follows. ---YY/T 0873.3-2014 Digital coding systems for dental rotary instruments - Part 3. Characteristics of needles and cutting tools (ISO 6360-3.2005, IDT) ---YY/T 0874-2013 Dentistry Rotating Apparatus Test Method (ISO 8325.2004, IDT) Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents. This part is proposed by the State Drug Administration. This part is under the jurisdiction of the National Technical Committee for Standardization of Dental Materials and Devices (SAC/TC99). This section drafted by. Guangdong Medical Device Quality Supervision and Inspection Institute, Guangzhou Xifu Medical Equipment Co., Ltd., Shenzhen Speed Air Technology Development Co., Ltd. The main drafters of this section. Huang Minju, Zhang Degui, Fang Wei, Wang Zhong, Li Danrong.

Introduction

The requirements for the dimensions and other aspects of steel cutting tools specified in this section are very important to ensure the interchangeability of the instruments in the laboratory. important. Dental science laboratory cutting tool Part 1. Steel cutting tools for laboratories

1 Scope

This part of GB/T 36917 specifies the dimensional requirements and other requirements for steel cutting tools for laboratories. This section applies to the nine steel cutting tools mainly used in the laboratory. This section does not apply to other features of the laboratory, such as. spiral blade, cross blade. Note. These cutting tools are also used in foot care.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. ISO 1797 dental rotating and vibrating instrument rods (Dentistry-Shanksforrotaryandoscilatinginstru- Mess) ISO 1942 Dentistry-Vocabulary Nominal diameter and number of ISO 2157 dental rotary instruments (Dentistry-Nominaldiametersanddesignation Codenumbersforrotaryinstruments) ISO 6360-3 Digital coding systems for dental rotary instruments - Part 3. Characteristics of needles and cutting tools (Dentistry- Numbercodingsystemforrotaryinstruments-Part 3.Specificcharacteristicsofbursandcutters) ISO 8325 Dentistry-Testmethodsforrotaryinstruments 3 terms and definitions, symbols 3.1 Terms and definitions The following terms and definitions defined by ISO 1942, ISO 6360-3 apply to this document. 3.1.1 Laboratory cutting tool with laboratorycutter A cutting tool for processing dental materials in a dental laboratory. 3.1.2 Dental laboratory A place where the process of assisting dental clinical treatment is performed. [ISO 1942.2009, definition 2.77] 3.2 symbol The following symbols apply to this document. d. diameter of the working part, head diameter. l. the length of the working part, the length of the head. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 36917.1-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 36917.1-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 36917.1-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 36917.1-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.