GB/T 36408-2018 English PDF

US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 36408-2018: Laminated veneer lumber for timber structures
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 36408-2018	359	Add to Cart	4 days	Laminated veneer lumber for timber structures	Valid

Similar standards

GB 55001   GB 55002   GB 50005   GB/T 36407   

Basic data

Standard ID: GB/T 36408-2018 (GB/T36408-2018)
Description (Translated English): Laminated veneer lumber for timber structures
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: P23
Classification of International Standard: 91.080.20
Word Count Estimation: 18,132
Date of Issue: 2018-06-07
Date of Implementation: 2019-01-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 36408-2018: Laminated veneer lumber for timber structures

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Laminated veneer lumber for timber structures ICS 91.080.20 P23 National Standards of People's Republic of China Veneer lumber for wood construction Published on.2018-06-07 2019-01-01 implementation State market supervision and administration China National Standardization Administration issued

Content

Foreword III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Category 1 5 Requirements 2 6 Test method 4 7 Quality Control 9 8 Identification, packaging and storage 11 Appendix A (Normative Appendix) Eigenvalue Coefficient 12 Reference 13

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. Some elements of this standard may involve patents, and the issuing organization does not assume responsibility for identifying these patents. This standard was proposed by the National Forestry and Grassland Bureau. This standard is under the jurisdiction of the National Timber Standardization Technical Committee Structural Wood Subcommittee (SAC/TC41/SC4). This standard was drafted. Heilongjiang Institute of Wood Science, Institute of Wood Industry, Chinese Academy of Forestry, Hengxin Wood (Pro 沂) Co., Ltd., Suzhou Kunlun Green Construction Wood Structure Technology Co., Ltd., Taizhou Kehao Wood Industry Co., Ltd., International Bamboo and Rattan Center, National Forest Industry Bureau Forest Products Industry Planning and Design Institute, Heilongjiang Province wood-based panels and wood sawn timber products quality supervision and inspection station. The main drafters of this standard. Lin Limin, Wang Chunming, Ren Haiqing, Zhao Rongjun, Wang Ge, Zhou Haibin, Xu Weitao, Meng Lipeng, Liu Yinan, Zhong Yong, Xu Lanying, Yang Chunmei, Wang Yongbing, Wang Xinjiang, Pan Chunxiong, He Lingzhi, Zhang Wei, Zhang Dongmei, Zhang Changwu. Veneer lumber for wood construction

1 Scope

This standard specifies the terminology, classification, requirements, test methods and quality control of veneer lumber for wood structures as well as marking, packaging and storage. This standard applies to veneer lumber used as a structural material in wood construction.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 2828.1. Sampling and sampling procedures - Part 1 . Batch-to-batch sampling plan for reception quality limit (AQL) GB/T 17657-2013 Test method for physical and chemical properties of wood-based panels and veneered panels GB/T 18259 wood-based panel and its surface decoration terminology GB/T 20241 veneer lumber GB 50005 wood structure design specification GB 50206 Wood Structure Engineering Construction Quality Acceptance Specification GB/T 50329 wooden structure test method standard

3 Terms and definitions

The following terms and definitions defined in GB/T 18259 and GB 50005 apply to this document. 3.1 For the purpose of load-bearing, the whole or spliced veneer is a structural panel for the main composite in accordance with the straight grain, and is formed by a structural adhesive. 3.2 Mechanical property characteristic value characteristicvalueofmechanicalproperty The statistical values calculated from the test and test data of the sample. In this standard, the elastic modulus (E) and the transverse compressive strength (fc⊥) The eigenvalues are averaged; the eigenvalues of other mechanical properties are taken as the lower limit of the 75% confidence of the 5% quantile of the corresponding statistical distribution.

4 classification

4.1 According to the pretreatment. a) veneer lumber for wood structures without preservative, insect repellent or flame retardant treatment; b) veneer lumber for wood structures treated with anti-corrosion, insect-repellent or flame-retardant treatment. 4.2 According to the thickness processing status. a) veneer lumber for wood structures that are not thickened; b) veneer lumber for wood structures with fixed thickness. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 36408-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 36408-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 36408-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 36408-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.